VEIRA Vocal Reverb
What does VEIRA Vocal Reverb do?
It is a vocal reverb laid out like the reverb returns of a mixing console. Six reverbs sit side by side, PLATE, HALL, ROOM, CHAMBER, SPRING and AMBIENCE, each on its own long fader with MUTE and SOLO and its own meter, and DRY and MASTER faders sit at the end. You bring up the ones the voice needs and balance them the way an engineer rides the returns on a desk. Touch a fader, or click its name plate, and that reverb’s controls come up at the top of the window, with a DECAY picture of how it dies away. SEND DE-ESS takes the s sounds out of what feeds the reverbs, and the dry voice is never touched.
How is it different from VEIRA Space?
Every return is VEIRA Space’s reverb engine fixed to one type and fully wet, with Space’s automatic cleanup (CLEAN) on each. VEIRA Space is one reverb with eight types, a CLEAN display, notches, shimmer and freeze, for any instrument. VEIRA Vocal Reverb puts six of its types on console faders at once, level-matched so they sit within about 0.1 dB of each other at the same fader, voiced for a lead vocal, with a de-esser on the send and DUCK on every return.
Which return should I use?
PLATE is the classic vocal reverb: dense from the start and bright, it adds sheen without pushing the singer away. HALL adds size for ballads and big choruses, usually with more pre-delay and some DUCK. ROOM is a studio live room, to take the deadness off a dry vocal or under a plate for depth, and the natural choice for speech. CHAMBER is denser and warmer, good for soul, gospel and intimate verses. SPRING is a drippy, vintage spring tank for retro, indie and dub vocals. AMBIENCE is reflections without a tail, for rap verses, voice-over, podcasts and doubles. Engineers often pair a short one (ROOM or AMBIENCE) with a longer one (PLATE or HALL).
I changed a knob and nothing happened. Why?
The knobs at the top belong to the selected return, whose name is shown at the top left. Touching a fader (or turning the wheel over it), or clicking a strip’s name plate, selects that return; its strip is lit amber. If the selected return’s fader is down, you won’t hear the change, so touch the fader of the return you want to change first. PRE-DELAY is dimmed while SYNC is on, NOTE while it is off, and EARLY on SPRING, which has no early reflections.
I hear no reverb, or some returns went silent.
Check that at least one return’s fader is up (its value window shows a number, not −inf dB), that its MUTE lamp is off, and that no other return is soloed: while any return is soloed, only the soloed ones play, with the dry voice. Switch every SOLO off. The strip meters help: a working return’s meter moves, and a muted or unsoloed return shows nothing.
What does SEND DE-ESS do?
A long tail turns every s into a hiss that hangs behind the words. SEND DE-ESS is VEIRA DeEss working on the send only: it turns the s sounds down above 5 kHz in what feeds all six reverbs, so the tails stay smooth, while the dry voice keeps every consonant, untouched. It compares the s band with the voice’s own level, so it works at any recording level, and it has no lookahead, so no latency. 0 % is off and 30 % (the default) already catches a typical s; 40 to 45 % suits bright, harsh voices. The CUT readout beside the knob shows what it takes off right now.
What do DUCK and CLEAN do?
DUCK turns a return down while the voice sings and lets it bloom back in the gaps over about 150 ms. The dip is 30 dB × DUCK: 10 % is 3 dB, 30 % is 9 dB. It follows the voice’s own peaks, so it works the same on a quiet take as on a loud one; raise the fader a little when you add it. CLEAN is VEIRA Space’s automatic cleanup: it turns down the frequencies that ring out of the reverb only while they ring, with no latency. On a strongly tonal voice it also lowers the reverb a little (about 2 to 3.5 dB at 20 to 30 %), so the presets set their faders with CLEAN in place.
Should I use it on an insert or on an aux send?
Both work; the only difference is the DRY fader. On an insert, on the vocal track itself, leave DRY at 0 dB and bring up the returns: quickest, and DUCK and SEND DE-ESS follow that voice exactly. On an aux, pull DRY down to −inf so only the reverbs come back, and send the lead, its doubles and the harmonies to it, so they share one space and one reverb. The eight Sends presets are set up that way. If your vocal got louder and slightly phasey on an aux, DRY is still up there.
Does it add latency, and how much CPU does it use?
There is no latency. With every return down and DRY and MASTER at 0 dB, the output is the input, bit for bit, at any block size. A return whose fader is down, or that is muted or left out by SOLO, stops running once it has faded out and costs nothing. Each running return costs about 6 to 9 % of one core of a 2-core cloud machine (stereo, 48 kHz), all six together about 43 %; most vocals use one to three. The reverb tail is reported to your DAW as 12 seconds.
What presets does it come with?
75 factory presets in 11 folders: Default (Init, the PLATE alone at −12 dB), Pop Vocals, R&B & Soul, Hip-Hop & Rap, Rock & Alternative, Singer-Songwriter, Ballads, Backing Vocals, Podcast & Voice-Over, Sends (DRY at −inf, for an aux) and Effects. Each was run on the real plugin on a sung vocal that suits its folder, or speech for Podcast & Voice-Over, with the vocal peaking at −6 dBFS. On a much denser or sparser vocal, set the return faders by ear first. Presets with SYNC follow your song’s tempo, and you can save your own with SAVE.