VEIRA Squasher
What does VEIRA Squasher do?
It does parallel compression on drums with one knob. The drums are compressed very hard, from 10:1 up to 100:1, brought back up to the loudness of the dry drums automatically, and blended underneath them. The real drums keep their hits, while the squashed copy brings up everything between them: the body of the snare, the ring of the toms, the room, the ghost notes and the hi-hat detail. SQUASH sets how hard, STYLE picks PUNCH, SMASH or PUMP, MIX sets how much of the squashed drums you hear (50 % by default) and OUTPUT sets the level. Put it on your drum bus, a drum loop, room mics or overheads.
How is it different from VEIRA Drum Bus?
VEIRA Drum Bus is a complete drum bus processor for the main compression on the bus: a hidden EQ, a COMPRESS knob with its own characters, ATTACK and RELEASE, and saturation. VEIRA Squasher does only the parallel part, and goes much further: ratios from 10:1 up to 100:1, a squashed path made to be blended under the dry drums rather than heard on its own, a soft clip at the dry drums’ own peak, and nothing to set but how hard and which character. They work well together: VEIRA Drum Bus to glue the kit, VEIRA Squasher after it, or on an aux, for weight.
What do PUNCH, SMASH and PUMP do?
PUNCH (10:1 to 20:1, a 1 ms attack, a 90 ms release) lets the front of each hit through over a solid body: the classic parallel drum sound, hard to overdo at 20 to 50 % MIX. SMASH (20:1 to 100:1, a 0.05 ms attack, a 50 ms release, the peaks clipped 3 dB under the dry drums’) flattens everything, the “all buttons in” sound: grit and energy for rock, punk, boom bap and breakbeats. PUMP (12:1 to 30:1, a 280 ms release, the sidechain at full range) lets the kick push the room and the cymbals down so they breathe back between the hits: for dance music and big, ambient drums. Switching never clicks.
Where should I set SQUASH and MIX?
A quick way: set MIX to 100 % so you hear only the squashed drums, and turn SQUASH up until the room, the ghost notes and the decays are as loud as you want them in the blend; 50 to 75 % is where most presets live. Then bring MIX down until the kit sounds bigger, not smaller: 15 to 30 % for drums that still sound natural, 30 to 50 % for bigger, heavier drums. If the drums lose their punch, MIX is too high; if you want more body at that MIX, raise SQUASH instead. The 39 factory presets are good starting points, sorted by style of music.
Should I put it on the drum bus or on an aux?
Either. On the drum bus, as an insert, the plugin does the blend itself with MIX, perfectly in time: that’s how the factory presets are set up. On an aux fed by a send from the drum bus, set MIX to 100 % (the Creative FX presets All Buttons In, Full Pump and Punch Only are set up that way) and use the aux’s fader as the blend; that lets you EQ the squashed drums on their own, for example a high-pass at 80 to 100 Hz so the squashed kick doesn’t swamp the bass. Your DAW compensates for the plugin’s 64 samples of latency on the aux, so keep delay compensation on.
Why doesn’t the level change when I turn SQUASH?
Because the makeup is automatic. The plugin measures the loudness of the dry drums and of the squashed drums the same way, K-weighted over about 1.5 seconds, and turns the squashed drums up until they match, up to +30 dB at the highest settings. Measured on rock, half-time and funk grooves, the squashed drums stay within about 1 dB of the dry ones at every setting, so SQUASH changes the density, not the level, and MIX blends two signals of the same loudness. The threshold also follows the drums’ own peak level, so the same setting does the same on a quiet bus and a hot one.
What is the latency, and why does the first hit pass unsquashed?
The latency is 64 samples at 44.1 to 96 kHz (1.3 ms at 48 kHz), for the soft clip’s oversampling, and none at 176.4 and 192 kHz. It is constant and reported to your DAW, which compensates for it; the dry drums are delayed by the same amount, so the blend is sample-aligned, and bypassed the plugin stays in time. When the drums start, the plugin takes about 60 ms to learn their level and lets those first moments through unsquashed, then settles over about a second and a half; through a break it remembers the level. Start playback or a bounce a bar early and it makes no difference.