VEIRA Sub Control
What is VEIRA Sub Control for?
VEIRA Sub Control does two jobs for the low end. COMPRESS evens out everything at 100 Hz and below, so loud bass notes come down and quiet ones come up, and HARMONICS adds harmonics of the low end so the bass still carries on phones, laptops and earbuds. Everything above 100 Hz, like the click of a kick or the pick of a bass, passes untouched.
How do I even out a bass line?
Load Bass ▸ Even Bass Line (or start from Init), press LISTEN and play the part so you hear only the lows. Raise COMPRESS until the notes that jump out sit level with the rest, usually 40–60 %, then release LISTEN and add a little WARM (10–30 %) with HARMONICS if the bass needs weight.
How do I make an 808 heard on phones and laptops?
Load Small Speakers ▸ 808 Phone Reach or 808s ▸ 808 Translate Weight, and listen on your phone or the smallest speakers you have. Raise HARMONICS with TRANSLATE selected until the notes are clearly heard as a line, usually 25–45 %, then check on your monitors that it doesn’t sound buzzy.
Should I choose WARM or TRANSLATE?
Choose WARM when you want the bass warmer, fuller or grittier, up to a driven, fuzzy low end at higher settings. Choose TRANSLATE when an 808, sub or clean synth bass needs to be heard on small speakers, or at low settings to help a master’s low end translate without colour. Switching between them crossfades over 20 ms, so you can switch while the music plays.
Where is the threshold for COMPRESS?
There isn’t one to set: COMPRESS follows the lows’ own usual level, so 40 % does the same job on a quiet bass at −26 dBFS as on a loud one at −6 dBFS. Makeup is automatic, so it evens the lows out without making them quieter. As a guide, 15–30 % is gentle levelling for buses and masters, 30–50 % natural control on instruments, and 50–70 % firm control.
Why does the REDUCTION needle only show part of what COMPRESS does?
Because COMPRESS also turns quiet notes up with its automatic makeup, the needle only rises on loud notes and falls back to 0 dB between them. On a bass line it typically swings a few dB on the loudest notes; the LOW END display shows the same over time, where an output taller than the input means a quiet note was lifted.
Does VEIRA Sub Control add latency?
No. Nothing is delayed, so it works on live inputs and while recording, and your DAW’s bypass is exact. At COMPRESS 0 % and HARMONICS 0 % the output is the input, bit for bit.
Why doesn’t COMPRESS seem to do anything?
Press LISTEN: if you hear little or nothing, there’s nothing under 100 Hz for COMPRESS to work on. It also measures against the lows’ own level, so a bass line that is already even gets little reduction, which is correct.
Why did my kick or 808 boom get longer, or the peaks go up?
COMPRESS turns up quiet parts, and a tail is a quiet part, so keep it under about 50 % on 808s and kicks. High COMPRESS can also make a note’s start louder than its body, and both harmonics styles add a little peak level (up to about 3 dB at 100 %); lower OUTPUT or follow Sub Control with a limiter.