VEIRA Mix Bus
What is VEIRA Mix Bus for?
VEIRA Mix Bus is a very simple, very gentle processor for the mix bus, the last thing before mastering. GLUE is one big knob of bus compression that pulls the mix together without squashing it, TONE has three broad moves (LOW, HIGH and AIR), WIDTH opens or narrows the stereo image above the low end, and OUTPUT sets the level. GLUE keeps the loudness, so a move changes the feel, not the level.
Which preset should I start from?
VEIRA Mix Bus comes with 61 factory presets in nine folders: Default (Init), All-Round, Pop, Rock, Hip-Hop & R&B, Electronic, Acoustic & Jazz, Orchestral & Film and Tone Only. Most are small moves; the presets named “More” go further, and Tone Only leaves GLUE at 0 % for a tone or width touch alone. Each one lands within 0.15 dB of bypass, so you can compare fairly.
How much does GLUE do?
GLUE (0 to 100 %, default 30 %) is gentle on purpose. On a mix the average reduction is about 0.55 dB at 30 %, 1 dB at 50 %, 1.6 dB at 70 % and 2.4 dB at 100 %, and the most it takes is about 3.6 dB. The knob has a square-root taper, so its first half already does something. 20 to 50 % is the usual range on a mix bus.
Do I need to set my input level for GLUE?
No. GLUE compares the mix with its own long-term loudness, over about 3 seconds, so the same setting does the same on a quiet mix and a loud one: in the plugin's tests, the same reduction at −4 and −30 dBFS. It hears the mix through a 90 Hz high-pass, so the kick and bass don't pump it.
I turn GLUE and the mix doesn't get louder. Is something wrong?
No, that's on purpose: GLUE gives the level back automatically (in the plugin's tests, within 0.02 dB at 30, 60 and 100 %), so you hear the mix hold together rather than get louder. Compare with bypass on the fullest part of the song, or try 70 % for a moment to hear what it does.
What do LOW, HIGH and AIR do?
LOW is a broad low shelf at 100 Hz and HIGH a broad high shelf at 5 kHz, each from −3 to +3 dB. AIR (0 to 100 %) is a soft lift of the very top: a shelf centred at 14 kHz, about +2 dB at 14 kHz and +2.5 dB at 18 kHz at 100 %. At 0 they're switched out and pass the mix exactly.
Does WIDTH change the low end or mono compatibility?
No. WIDTH (50 to 150 %, default 100 %) only scales the side, the stereo part of the mix, above 150 Hz; the mid and the low end stay where they are, so mono compatibility holds. 100 % leaves the image exactly as it is. WIDTH works in stereo only, so on a mono track it does nothing.
Does VEIRA Mix Bus add latency?
No, there's no latency, so you can leave it on the mix bus while you record. At GLUE 0 %, LOW, HIGH and AIR at 0, WIDTH 100 % and OUTPUT 0 dB, the output is the input, bit for bit.