VEIRA Gate Red
What does VEIRA Gate Red do?
It is a drum gate, the punchy one of the four VEIRA colour gates, painted deep lacquered red, for tight, snappy kicks, snares and toms. KEY FREQ and KEY WIDTH put a band-pass key on the drum’s own body so hi-hats and cymbals can’t open it, SNAP adds up to 8 dB of attack as the gate opens on each hit, TIGHTEN shortens the ring after it, and LOOKAHEAD up to 10 ms has it fully open before the stick lands. THRESHOLD, RANGE, ATTACK, HOLD, RELEASE, LISTEN, an external key, MIX and OUTPUT.
Which of the four colour gates should I choose?
All four turn down what you don’t want between the notes and show it on a scrolling waveform; what differs is how they listen and how they move. White is clean: a precise gate with HYSTERESIS, LOOKAHEAD to 10 ms, key filters, an external key and FLIP ducking, for anything you want gated exactly. Red is punchy: a drum gate with a band-pass KEY that ignores cymbal bleed, SNAP and TIGHTEN. Gold is smooth: a downward expander with RATIO, KNEE, AUTO release and BREATH, for vocals, dialogue and acoustic instruments. Blue is vintage: a 1970s British console channel gate / expander with FAST ATTACK, GATE / EXPAND, the channel filters and COLOUR.
How do I set the band-pass key?
Switch on LISTEN and move KEY FREQ until you hear mostly the drum’s body: about 90 Hz for a kick, 200 Hz for a snare, 95 to 150 Hz for toms. Narrow KEY WIDTH (1 to 2 octaves) until the hats and cymbals are gone, then switch LISTEN off and set THRESHOLD against the teal key line on the HISTORY. You can also drag the band’s centre on the KEY BAND panel and scroll over it for the width. Fully right, KEY WIDTH reads OPEN: no filter.
What do SNAP and TIGHTEN do?
SNAP adds attack: on each hit it lifts the gain by up to 8 dB, rising with the gate’s opening, holding 3 ms and falling away over 30 ms, so the start of each hit cracks more (+3.9 dB over the first 10 ms at 50 %). TIGHTEN shortens the ring: after each hit it pulls the part above the floor down, up to 20 dB in 40 ms at 100 %, and never under RANGE. Both follow the same click-free curve as the gate. SNAP makes peaks louder, so trim OUTPUT; the presets keep peaks at −1 dBFS.
Why does it need LOOKAHEAD?
Because a band-passed key is a few milliseconds late on the hit: a filter takes time to ring up, and a narrow, low band takes longest. In the lab the snare’s band-passed key reached the threshold up to 5.4 ms after the hit. Give LOOKAHEAD that delay plus ATTACK and the first sample of every hit comes through whole: with LOOKAHEAD 8 ms and ATTACK 2 ms the first 10 ms of every backbeat came through at 0.00 dB. The snare presets use 5 to 6 ms, the kick and tom presets 9 to 10 ms.
Will it double-trigger on flams, rolls or ringing drums?
No. The gate closes 6 dB under THRESHOLD, so a drum ringing at the threshold can’t chatter. A hit for SNAP and TIGHTEN is the gate opening, or a new stroke while it is open (the key fell 3 dB and rose 3 dB again, at least 25 ms after the last hit): a flam is one thicker hit, a sustained bass note one hit, and each stroke of a fill or a roll is a new hit. In the drum lab there were no false openings, no missed backbeats and no double triggers. For fast tom fills, a wider band (3 octaves) helps.
Does it add latency?
Yes: 10 ms, 480 samples at 48 kHz (441 at 44.1 kHz, 960 at 96 kHz), the longest LOOKAHEAD. It is the same whatever the settings and reported to your DAW, which compensates automatically, and the host’s bypass is delayed by the same amount, so bypassing keeps the track in time.
What presets does it come with?
36 factory presets in 9 folders: Default, Kick, Snare, Toms, Vocals, Guitars, Bass, Noise & Hum and Creative. Each was measured through the plugin on matching material, close drum mics peaking at −4 dBFS with their bleed and other tracks at −8 dBFS: every measured preset opens for every hit or note with no false and no double openings, and the presets with SNAP are trimmed to peak at −1 dBFS. Set THRESHOLD first for your own level. Kick Trigger Gate needs a key on the sidechain input. You can save your own with SAVE in the preset bar.