VEIRA Reverb Blue
What does VEIRA Reverb Blue do?
It brings back the sound of the classic early-1980s digital rack reverbs, the vintage digital one of the four VEIRA colour reverbs, painted 1970s steel blue: lush, chorused halls and plates. The sound goes round a ring of diffusers and delays whose read points wander at random, so the tail choruses instead of ringing, and ERA sets the converters it is heard through. PROGRAM, DECAY, LOW X with CROSSOVER, HIGH CUT, ERA, PRE-DELAY or a synced NOTE, SIZE, DIFFUSION, MOD DEPTH, MOD RATE, WIDTH, MIX with LOCK and OUTPUT.
Which of the four colour reverbs should I choose?
All four have tempo-synced pre-delay, WIDTH, an equal-power MIX with LOCK for aux returns and the same meter bridge; what differs is the space they make. White is pristine: a modern algorithmic hall and room with four spaces, a decay you shape per band, DUCK and FREEZE, for natural, colourless space on anything. Red is the classic studio steel plate: bright, dense from the first millisecond and smooth, for vocals and snare above all. Gold is a studio echo chamber: a real room’s early reflections, low-mid warmth and the chain’s colour. Blue is the early-1980s digital rack reverb: lush, chorused halls and plates heard through the converters of the era.
Which PROGRAM should I use?
PLATE for vocals, snares and anything that should sound bright and immediate: dense from the start, with no early reflections. HALL for vocals, guitars, keys and strings that need space: a gentle build, wide and smooth. CHAMBER for toms, organ and brass: dense, warm and close. ROOM for kits, funk guitar and dialogue: short and natural. CONCERT for pads, big lead lines and long, deeply chorused tails: its ring is the biggest and builds most slowly.
What does ERA do?
ERA chooses the converters the reverb is heard through. At 0 % it is a clean late-80s unit, 16 kHz wide and 24 bits; at the default 50 %, about 12.6 kHz and 18 bits, slightly soft at the top; at 100 % the first units’ 10 kHz bandwidth and 12-bit converters that switch their range in 6 dB steps with the signal, so a fine grain follows the tail down. The grain is made between the converters’ filters, as in the hardware, so it stays in the band and never aliases.
How do MOD DEPTH and MOD RATE work?
The ring’s delays don’t follow a regular LFO, which you would hear as a warble. Each stage moves to a new random target at a random time around 1 / MOD RATE and glides there, so the movement never repeats. MOD DEPTH sets how far they move and MOD RATE (0.1 to 5 Hz) how often they turn. 30 to 50 % at 0.4 to 1 Hz is the classic shimmer; 60 to 80 % gives the lush chorus of electric pianos and pads; at 0 % the tail is perfectly still.
Why does changing SIZE or PROGRAM restart the reverb?
Stretching the delays of a ring that is already ringing would bend its pitch by semitones, so a new SIZE or PROGRAM starts a new tank and lets the old one ring out over 0.8 s, as on the classic units; if you change again while the last one still rings, it is finished in 30 ms first. Nothing clicks, but the new space starts from the next sound, so change SIZE between phrases rather than as an automation sweep.
Does it add latency?
No. Reverb Blue adds no delay, so your DAW’s bypass needs no compensation and you can play live through it. At MIX 0 % with OUTPUT at 0 dB the output is the input, bit for bit, and when the music stops the tail ends in true digital silence. With ERA up, the converters’ rounding ends the tail in silence sooner.
What presets does it come with?
44 factory presets in 9 folders: Default, Vocals, Drums, Guitars, Keys & Synths, Strings & Orchestral, Post & Film, Creative and Mix Bus, from Vintage Vocal Plate and Big Eighties Snare to Electric Piano Chorus, Twelve-Bit Grit, Infinite Concert and three aux returns at MIX 100 %. Measured through the plugin on matching material, every insert preset comes out within 1 LU of the dry track and no output peaks over −4 dBFS. You can save your own with SAVE.