VEIRA Delay Red
What does VEIRA Delay Red do?
It is an analog bucket-brigade delay, the analog one of the four VEIRA colour delays, painted deep lacquered red, in the tradition of the classic analog pedals and rack delays: warm, soft, chorused repeats that melt behind the part. TIME (20 ms to 1 s) is the chips’ clock, so longer echoes are darker and turning TIME bends them in pitch; FEEDBACK goes to 120 % and runs away into saturation; RATE, DEPTH and SPREAD give the chorused repeats; AGE, COMPANDER and NOISE set how worn the chips sound.
Which of the four colour delays should I choose?
All four sync to the song’s tempo with straight, dotted and triplet values, have an equal-power MIX with LOCK for aux returns, no latency and the same meter bridge; what differs is the sound of the repeats. White is clean: exact, uncoloured echoes in mono, stereo or ping-pong, with filters in the loop, DUCK, FREEZE and GLIDE or FADE. Red is analog: a bucket-brigade delay whose echoes are darker the longer they are, with chorused MOD, AGE, COMPANDER and a loop that runs away and sings. Gold is warm: a multi-head tape echo with three heads, a spring tank, SATURATION, WOW and FLUTTER. Blue is vintage digital: an early-1980s rack delay with ERA’s converters, GRIT, chorus and flanging, HOLD and the PITCH bend.
Why are the long echoes darker?
Because that is how a bucket brigade works. The delay is 4,096 buckets passed along at the tick of a clock, so a longer time needs a slower clock, and a slower clock can only carry lower frequencies: the filters around the chips are set to a fraction of it. At 120 ms the first echo reaches about 9 kHz, at 350 ms 3.7 kHz, at 800 ms 1.6 kHz, and the REPEATS display shows the CLOCK and the BANDWIDTH as you turn TIME. For bright echoes at long times, use VEIRA Delay White or Blue.
What do AGE, COMPANDER and NOISE do?
They set how the chips sound. AGE wears them: less bandwidth, less headroom (the input stage saturates sooner, with more even harmonics) and more hiss; 35 to 60 % is warm, 75 to 100 % a gritty, worn-out chip. COMPANDER sets the vintage 2:1 compressor and 1:2 expander around the chips, which keep the hiss down and make the echoes breathe a little; 0 % has none. NOISE sets the chips’ hiss and the clock’s whine, heard at longer times; both fade with the repeats, and at 0 % there is none.
Why does the pitch bend when I turn TIME?
TIME is the chips’ clock, and when the clock changes speed everything already in the buckets comes out faster or slower, as on the real circuits: the echoes bend down while the time grows and up while it shrinks, then settle. The clock glides smoothly (in about 110 ms), so nothing clicks. Sweep TIME on purpose for the classic analog pitch effects, or with FEEDBACK past 100 % for a dub siren; if you need a new time without a bend, change it in a pause.
How do I use it on an aux send?
Insert it on a return track (an aux, bus or FX channel), set MIX to 100 % so the return carries only the echoes, and switch on LOCK: with LOCK on, loading a preset leaves MIX where it is, so you can step through presets without the dry signal coming back. Then send each track to it with your DAW’s sends. For a throw, one word or one snare hit echoed and the rest dry, automate only the send: the echoes ring on after it closes. The Mix folder has ready-made aux returns at MIX 100 %.
Does it add latency?
No. Delay Red reports no latency, so your DAW’s bypass needs no compensation and you can play live through it, and every echo still lands on its time. At MIX 0 % with OUTPUT at 0 dB the output is the input, bit for bit, and when the echoes have died away the output ends in true digital silence. The delays of the input stage’s oversampling and of the chips’ filters are taken off the buckets’ own delay, so TIME stays exact.
What presets does it come with?
41 factory presets in 9 folders: Default, Vocals, Guitars, Keys & Synths, Drums, Mix, Rhythmic, Ambient and Creative, from Analog Slapback and Classic Pedal Echo to Synth Bucket Chorus, Dub Snare Throw, Underwater Echoes, Broken Chip and three aux returns at MIX 100 %. They are set for an insert (MIX 8 to 40 %). Measured at 120 BPM on matching material, every insert preset comes out within −0.46 to +0.72 dB of the dry track. Save your own with SAVE.