VEIRA Delay Blue

What does VEIRA Delay Blue do?

It is an early-1980s studio rack digital delay, the vintage digital one of the four VEIRA colour delays, painted 1970s steel blue: long, clean-to-gritty repeats through converters with steep filters and few bits, rack chorus and the jet flanger from a swept delay, ping-pong, an infinite HOLD and the vintage pitch bend when you turn TIME. TIME runs to 2.5 s or syncs to a note, FEEDBACK to 110 % with INVERT, LOW CUT and HIGH CUT sit in the loop, and ERA and GRIT choose how vintage the converters sound.

Which of the four colour delays should I choose?

All four sync to the song’s tempo with straight, dotted and triplet values, have an equal-power MIX with LOCK for aux returns, no latency and the same meter bridge; what differs is the sound of the repeats. White is clean: exact, uncoloured echoes in mono, stereo or ping-pong, with filters in the loop, DUCK, FREEZE and GLIDE or FADE. Red is analog: a bucket-brigade delay whose echoes are darker the longer they are, with chorused MOD, AGE, COMPANDER and a loop that runs away and sings. Gold is warm: a multi-head tape echo with three heads, a spring tank, SATURATION, WOW and FLUTTER. Blue is vintage digital: an early-1980s rack delay with ERA’s converters, GRIT, chorus and flanging, HOLD and the PITCH bend.

What do ERA and GRIT do?

ERA chooses the converters every repeat passes through, twice on each trip (the D/A, then the A/D), as on the hardware. At 0 % a clean late-1980s unit: an 18 kHz band and 16 bits. At 40 %, the default, the mid-80s: 12.3 kHz and 13.6 bits. At 100 % the first digital delays: 7 kHz and 10 bits, dark and grainy. The bits are gain-ranged, so the grain follows the music down and stays inside the band. GRIT runs the converter’s clock slower than its filters allow, for the metallic aliasing of the cheapest units; at 0 % nothing aliases.

How do I get chorus or flanging?

Modulation sweeps the read around TIME, and what you hear depends mostly on TIME. For the rack chorus, set TIME to 10 to 30 ms, MOD DEPTH to 1 to 3 ms, MOD RATE to 0.5 to 1 Hz, DUAL and MIX around 40 to 50 % (the preset Eighties Chorus). For the jet flanger, set TIME to 1 to 3 ms, MOD DEPTH about as much again, FEEDBACK 60 to 75 % and a slow TRIANGLE sweep (Rack Flanger, Jet Flanged Kit); INVERT gives a hollower colour. On echoes, a little depth or RANDOM makes a tape-like drift.

What do HOLD and PITCH do?

HOLD repeats the memory for ever, exactly as it is: digitally, with no converters, filters or decay, so the top never darkens, while new input stays out (137 dB under the held sound). Release it and the repeats fade again. PITCH is a TIME CHANGE mode: a new TIME is reached by sliding the read like the hardware’s clock, so the repeats bend in pitch on the way, at most an octave down or half again up (the preset Pitch Dive Echo). FADE, the default, crossfades to the new time in 40 ms with no pitch change.

How do I use it on an aux send?

Insert it on a return track (an aux, bus or FX channel), set MIX to 100 % so the return carries only the echoes, and switch on LOCK: with LOCK on, loading a preset leaves MIX where it is, so you can step through presets without the dry signal coming back. Then send each track to it with your DAW’s sends. For a throw, one word or one snare hit echoed and the rest dry, automate only the send: the echoes ring on after it closes. The Mix folder has ready-made aux returns at MIX 100 %.

Does it add latency?

No. Delay Blue reports no latency, so your DAW’s bypass needs no compensation and you can play live through it, and every echo still lands on its time. At MIX 0 % with OUTPUT at 0 dB the output is the input, bit for bit, and when the echoes have died away the output ends in true digital silence. The converters’ delay is taken off the reads.

What presets does it come with?

41 factory presets in 9 folders: Default, Vocals, Guitars, Keys & Synths, Drums, Mix, Rhythmic, Ambient and Creative, from Digital Vocal Slap and Eighties Chorus to Rack Flanger, Jet Flanged Kit, Haas Widener, Dark Era Space, Aliased Lo-Fi and two aux returns at MIX 100 %. Set MIX first, then FEEDBACK. Measured at 120 BPM on matching material, every insert preset comes out within 0.78 LU of the dry track, with no output peak over −3.4 dBFS. Save your own with SAVE.

VEIRA Delay Blue · Help · VEIRA