VEIRA System 1
What does VEIRA System 1 do?
It is a patchable modular synthesizer, an original design in the spirit of the 1970s modular systems: three rows of modules in a walnut cabinet, and cables you drag from jack to jack. Three VCOs, noise, two LFOs, slew and mults make the sound and the movement; a mixer, ring modulator, wavefolder, a 24 dB ladder, a state-variable filter, two VCAs and attenuverters shape it; two envelopes, an eight-step sequencer and an output with drive and a bucket-brigade delay finish it.
How do I load it in my DAW?
It is an instrument, not an effect: load it on an instrument (software instrument or MIDI) track, not as an insert on an audio track. In Logic Pro it is under AU Instruments ▸ VEIRA ▸ VEIRA System 1. It has MIDI in and stereo or mono out, and no audio input.
How do I patch a cable?
Drag from an output (a cream box) to an input (a black jack); you can also start at an input and drag back to an output. One output can feed any number of inputs, but an input takes one cable: a new one replaces it. Click a plug to pull it out, or drag it to another input to move it, or onto the panel to remove it.
Why does it make sound with no cables?
Every input has a normal: with no cable, it hears a sensible default. So the empty cabinet already plays a complete voice: VCO 1’s saw (and VCO 2, VCO 3 and the noise at their mixer levels) through the MIXER, the VCF and VCA 1 to the output, ENV 1 on VCA 1, ENV 2 on the cutoff, MIDI PITCH on the VCOs and MIDI GATE on the envelopes. Plugging a cable into an input replaces its normal. Hover any input to see its normal.
Can I patch audio into a control input, or make feedback loops?
Yes to both. Every input takes audio as well as control signals, at audio rate, so an oscillator into a filter’s FREQ or another oscillator’s FM gives growls and metallic tones. Feedback is allowed: an input fed from later in the chain hears the previous sample, and every output is held within safe limits, so loops are stable.
Is it polyphonic?
Yes, truly. VOICES picks Mono (the last note wins, legato) or 2, 4, 6 or 8 voices, and each voice is the whole patch, so every note of a chord has its own filter, folder, envelopes and feedback. Voice 1 always runs, like a powered-up modular, so drones and sequences play with no keys held. The sequencer, the output stage and the delay are shared.
Does the sequencer follow my song’s tempo?
Yes, with SYNC on: it steps at a DIVISION of your DAW’s tempo, from 1/4 to 1/32 with triplets. With SYNC off it runs at its own RATE. It has eight steps of ±24 semitones, LENGTH and GATE, and outputs CLOCK, GATE and CV. Patch its CV into the VCOs’ PITCH and its GATE into the envelopes, press RUN, and hold a key to transpose the sequence.
Are my cables saved?
Yes. The cables are the patch, saved with your session and in presets, user presets included, together with every knob. The 72 knobs and switches are also parameters you can automate in your DAW; the cables are not.
How much CPU does it use?
Only the modules the output needs run. Eight voices of a patch using every module take about 20 % of one core at 48 kHz; the normalled patch takes much less. If your computer struggles, lower VOICES. It adds no latency.
What presets does it come with?
46 factory patches in nine folders: Default (Init, First Cable), Bass, Leads, Pads, Keys, Percussion, Sequences, FX & Drones and Experimental, from Acid Ladder and Sync Growl to Analog Strings, FM Tines, Analog Kick, Berlin Steps, Self-Osc Drone and Chaos Loop. Each is a whole patch, knobs and cables, with a note on what to try, levelled to about −16 LUFS. Init is the normalled patch with no cables; First Cable has just one.