VEIRA Gate White

What does VEIRA Gate White do?

It is a precise, transparent modern gate, the clean one of the four VEIRA colour gates, painted pearl white. It opens on the exact sample the key reaches THRESHOLD, keeps a separate close point (HYSTERESIS) so decays don’t chatter, and opens and closes along a smooth curve that doesn’t click at any setting. RANGE to silence, ATTACK, HOLD, RELEASE, LOOKAHEAD up to 10 ms, key filters with LISTEN, an external key, FLIP for ducking, LINK, MIX and OUTPUT. Open, it passes your audio bit for bit.

Which of the four colour gates should I choose?

All four turn down what you don’t want between the notes and show it on a scrolling waveform; what differs is how they listen and how they move. White is clean: a precise gate with HYSTERESIS, LOOKAHEAD to 10 ms, key filters, an external key and FLIP ducking, for anything you want gated exactly. Red is punchy: a drum gate with a band-pass KEY that ignores cymbal bleed, SNAP and TIGHTEN. Gold is smooth: a downward expander with RATIO, KNEE, AUTO release and BREATH, for vocals, dialogue and acoustic instruments. Blue is vintage: a 1970s British console channel gate / expander with FAST ATTACK, GATE / EXPAND, the channel filters and COLOUR.

What does HYSTERESIS do?

It sets a close point under THRESHOLD. The gate opens when the key reaches THRESHOLD and starts to close only once the key has stayed under the close point for HOLD, so a note dying away over noise can’t flutter it open and shut. In the lab, 20 noisy decays re-opened the gate 21 times with no hysteresis and not once at 3 or 6 dB (6 dB is the default). The close point is the dotted line under the threshold on the HISTORY; drag it to set HYSTERESIS.

How do LOOKAHEAD and ATTACK work together?

LOOKAHEAD lets the gate hear the key up to 10 ms ahead of the audio, so it is already opening when a hit arrives. With LOOKAHEAD at least as long as ATTACK, the first sample of every transient comes through whole: with LOOKAHEAD 2 ms and ATTACK 1 ms, the gain was exactly 1 on the hit’s first sample. A low-filtered key arrives a few milliseconds late, which is why the kick presets use 7 to 10 ms. The latency is always 10 ms, so changing LOOKAHEAD never moves your track.

How do I stop the hi-hat from opening a snare’s gate?

Use the key filter. SC HPF and SC LPF are 24 dB/oct filters on what the gate listens to, never on what you hear: around 150 Hz and 400 Hz the gate hears the snare’s body but not the kick below or the hats above. Switch on LISTEN to hear the key while you set them, or drag their handles on the KEY FILTER panel, then set THRESHOLD against the teal key line on the HISTORY. The Snare presets start there; Snare Hat Reject narrows the key further and adds 8 dB of HYSTERESIS.

How do I duck one track from another with FLIP?

Insert Gate White on the track to turn down, route the key track to its sidechain input in your DAW (in Logic, the Side Chain menu at the top of the plugin; in Cubase or Nuendo, enable the side-chain input and send the key track to it), then switch on EXT KEY and FLIP. Now the key turns the track down by RANGE over ATTACK and lets it back over RELEASE after HOLD; the state reads DUCKING or IDLE. The Creative preset Kick Duck is a ready-made start.

Does it add latency?

Yes: 10 ms, 480 samples at 48 kHz (441 at 44.1 kHz, 960 at 96 kHz), the longest LOOKAHEAD. It is the same whatever the settings and reported to your DAW, which compensates automatically, and the host’s bypass is delayed by the same amount, so bypassing keeps the track in time. Avoid monitoring a live input through it if 10 ms matters to the performer.

What presets does it come with?

35 factory presets in 9 folders: Default, Kick, Snare, Toms, Vocals, Guitars, Bass, Noise & Hum and Creative. Each was measured through the plugin on matching material, close drum mics peaking at −4 dBFS with their bleed and other tracks at −8 dBFS: every measured preset opens for every hit or note with no false and no double openings. THRESHOLD depends on your level, so set it first, by eye on the HISTORY. Kick Duck and Trance Gate Hats need a key on the sidechain input. You can save your own with SAVE in the preset bar.