VEIRA Gate Gold

What does VEIRA Gate Gold do?

It is a smooth downward expander, the smooth one of the four VEIRA colour gates, painted brushed champagne gold, for vocals, dialogue, podcasts and acoustic instruments. It turns down the room, the hiss and the breaths between phrases and leaves the words alone: under THRESHOLD it leans the level down by RATIO (1:1 to 1:8), eased in over KNEE and never further than RANGE. It looks 10 ms ahead, has an AUTO release, BREATH, SC HPF, MIX and OUTPUT.

Which of the four colour gates should I choose?

All four turn down what you don’t want between the notes and show it on a scrolling waveform; what differs is how they listen and how they move. White is clean: a precise gate with HYSTERESIS, LOOKAHEAD to 10 ms, key filters, an external key and FLIP ducking, for anything you want gated exactly. Red is punchy: a drum gate with a band-pass KEY that ignores cymbal bleed, SNAP and TIGHTEN. Gold is smooth: a downward expander with RATIO, KNEE, AUTO release and BREATH, for vocals, dialogue and acoustic instruments. Blue is vintage: a 1970s British console channel gate / expander with FAST ATTACK, GATE / EXPAND, the channel filters and COLOUR.

What is the difference between an expander and a gate?

A gate switches: under the threshold it drops the level by its whole range at once, which suits drums but can sound like a switch on a voice. A downward expander leans the level down gradually: at 1:2, every dB under the threshold becomes two, so quiet noise between phrases goes a long way down while a soft word ending just under the threshold only comes down a little. Gate Gold also caps the reduction at RANGE, so the room gets quieter but never dead. At 1:8 it behaves almost like a gate.

What does BREATH do?

It turns down breaths and room noise between phrases even when they sit over the threshold, which a plain expander can’t do without also eating quiet word endings. It listens for sound with no voice in it (little of its power under 1 kHz) that sits well under the level the voice last reached, and never counts anything within 60 ms after the voice, so consonants and endings are left alone. At 100 % it takes them all the way to RANGE: on sung phrases the breaths came down 8.6 dB while the words lost 0.001 dB. Breath Only uses it alone.

Where should I set THRESHOLD?

Between the noise and the quietest words. Play a passage with pauses and move THRESHOLD until the two dashed lines on the waveform sit just over the noise between phrases, with the quietest syllables outside them. Because an expander leans in gradually, a few dB either way is forgiving. If quiet word endings start to soften, lower it a little or widen KNEE; if breaths still come through, raise BREATH rather than THRESHOLD.

What does AUTO do on the release?

It makes the release follow the programme. A memory charges over 1.5 s while the sound is over the knee and fades over 3 s under it, and scales RELEASE from 0.35 times, after short bursts, so a click or a cough is cut quickly, to 2 times, after long phrases, so the last word’s tail fades naturally. At RELEASE 300 ms it closed 90 % in 221 ms after a 0.1 s burst and in 596 ms after a 4 s phrase. RELEASE NOW under the STATIC CURVE shows the release in use. AUTO is on by default.

Does it add latency?

Yes: 10 ms, 480 samples at 48 kHz (441 at 44.1 kHz): the lookahead that lets a word start fully open. It is the same whatever the settings and reported to your DAW, which compensates automatically, and the host’s bypass is delayed by the same amount, so bypassing keeps the track in time. Avoid monitoring a live voice through it if 10 ms matters to the performer.

What presets does it come with?

36 factory presets in 9 folders: Default, Vocals, Dialogue & Podcast, Acoustic, Drums, Guitars, Bass, Noise & Hum and Creative. Each was run through the plugin on matching material with its parts kept apart (words, breaths, noise, hum, bleed): outside Creative, the words or notes never lose more than 0.12 dB and their starts more than 0.6 dB, and no preset chatters. Each preset’s tooltip carries its measured result. Set THRESHOLD first for your recording. You can save your own with SAVE in the preset bar.