VEIRA Reverb Gold

What does VEIRA Reverb Gold do?

It recreates a studio echo chamber, the warm one of the four VEIRA colour reverbs, painted brushed champagne gold: the send plays through a speaker into a hard room and a pair of microphones picks it up, in the tradition of the great 1950s-60s studio echo chambers. You get a real room’s early reflections, a dense tail with the low-mid warmth of hard rooms, and the gentle colour of the speaker and the microphone chain. CHAMBER, MIC DISTANCE, DECAY, PRE-DELAY, SPEAKER, MIC, WARMTH, the send’s LOW CUT and HIGH CUT, WIDTH, DUCKING, MIX with LOCK and OUTPUT.

Which of the four colour reverbs should I choose?

All four have tempo-synced pre-delay, WIDTH, an equal-power MIX with LOCK for aux returns and the same meter bridge; what differs is the space they make. White is pristine: a modern algorithmic hall and room with four spaces, a decay you shape per band, DUCK and FREEZE, for natural, colourless space on anything. Red is the classic studio steel plate: bright, dense from the first millisecond and smooth, for vocals and snare above all. Gold is a studio echo chamber: a real room’s early reflections, low-mid warmth and the chain’s colour. Blue is the early-1980s digital rack reverb: lush, chorused halls and plates heard through the converters of the era.

What is the difference between the four chambers?

Each is a real-sized room of one material, so each has its own reflections and its own decay across frequency. TILE (4.6 x 3.3 x 2.9 m) is small, close, bright and dense: snares, percussion, pop vocals. PLASTER (7.6 x 4.9 x 3.6 m) is the warm, smooth studio chamber and the default. BRICK (6.4 x 5.3 x 4.1 m) is the most diffuse, with rich low mids. VAULT (11.5 x 6.8 x 4.8 m) is a big stone vault: deep, dark and long. A change lets the old room ring out over a second, so nothing clicks.

What does MIC DISTANCE do?

It moves the pair of microphones along the room, from near the speaker (0 %) to the far end (100 %). Near the speaker the first reflections are strong and close together and there is more early sound against the tail: a present, defined room. Far away they arrive later and more evenly and the tail takes over. In the PLASTER the first reflection arrives 5.1, 10.7 and 16.4 ms after the pre-delay at 0, 50 and 100 %; the level stays the same, only the shape changes.

What does WARMTH do, and will it distort?

WARMTH adds the colour of the chamber’s speaker and microphone chain: mostly the 2nd harmonic, then the 3rd, more on loud low notes than high ones, with the transformer’s slight low-mid lift and softer top. At the default 35 % a 100 Hz tone at −6 dBFS has 1.05 % distortion, felt as warmth rather than heard; at 80 to 100 % loud lows get audibly gritty, a lo-fi effect. It works only on the chamber, never on the dry sound, and is oversampled so nothing aliases. At 0 % the chain is clean.

Why are LOW CUT and HIGH CUT on the send?

Because that is how a chamber was used: the console filtered what went to the speaker, and the room then reverberated what was left. Taking the bass out before the room keeps it from booming, and taking the top off softens every reflection as well as the tail, which sounds more natural than filtering the return. The default is 90 Hz to 12.0 kHz; 150 to 250 Hz is right for vocals and snare, and 4 to 7 kHz gives an older, darker chamber.

Does it add latency?

No. Reverb Gold adds no delay, so your DAW’s bypass needs no compensation and you can play live through it. At MIX 0 % with OUTPUT at 0 dB the output is the input, bit for bit, and when the music stops the tail ends in true digital silence. WARMTH is oversampled, and its filters are taken off the room’s own delays, so every reflection still arrives on time.

What presets does it come with?

44 factory presets in 9 folders: Default, Vocals, Drums, Guitars, Keys & Synths, Strings & Orchestral, Post & Film, Creative and Mix Bus, from Classic Vocal Chamber and Big Tile Snare to Rhodes Glow, Brick Cellar, Telephone Chamber and two aux returns at MIX 100 %. Measured through the plugin on matching material, every insert preset comes out within 1 LU of the dry track and no output peaks over −4 dBFS. You can save your own with SAVE.

VEIRA Reverb Gold · Help · VEIRA