VEIRA Delay White

What does VEIRA Delay White do?

It is a modern digital delay, the clean one of the four VEIRA colour delays, painted pearl white: each repeat is the sound itself, landing exactly on time. Choose MONO, STEREO or PING-PONG, set TIME L and TIME R from 1 ms to 4 s or SYNC them to note values, and set how many repeats you hear with FEEDBACK (to 110 %). LOW CUT and HIGH CUT darken and thin each repeat in the loop, DUCK with its RELEASE keeps the echoes out of the words, and WIDTH, MOD, FREEZE, GLIDE or FADE and MIX with LOCK finish it.

Which of the four colour delays should I choose?

All four sync to the song’s tempo with straight, dotted and triplet values, have an equal-power MIX with LOCK for aux returns, no latency and the same meter bridge; what differs is the sound of the repeats. White is clean: exact, uncoloured echoes in mono, stereo or ping-pong, with filters in the loop, DUCK, FREEZE and GLIDE or FADE. Red is analog: a bucket-brigade delay whose echoes are darker the longer they are, with chorused MOD, AGE, COMPANDER and a loop that runs away and sings. Gold is warm: a multi-head tape echo with three heads, a spring tank, SATURATION, WOW and FLUTTER. Blue is vintage digital: an early-1980s rack delay with ERA’s converters, GRIT, chorus and flanging, HOLD and the PITCH bend.

What is the difference between STEREO and PING-PONG?

In STEREO each side has its own delay line, the left at TIME L and the right at TIME R: with LINK on both use TIME L and a stereo track keeps its image; with LINK off, two slightly different times make a wide echo, and two very short ones (15 to 30 ms) widen a part without an audible echo. In PING-PONG the input is summed into the left line, whose echoes feed the right, so the repeats alternate sides: left after TIME L, then right after TIME R more. MONO sums the input to one line, with the echoes in the centre.

What happens when FEEDBACK goes over 100 %?

At 100 % the echoes repeat for ever at the same level. Over 100 % each pass is louder than the one before, so the loop builds and sings, the classic dub effect; a loop limiter, a level control rather than a curve, holds it safely (at 110 % its ceiling is −6 dBFS) and adds no distortion. With LOW CUT and HIGH CUT in, the singing loop darkens and thins as it goes. Turn FEEDBACK back under 100 % to let it fade, or press FREEZE to hold what is in the loop exactly, with new sound kept out.

What do GLIDE and FADE do?

They decide how a new time is reached when you turn TIME or a synced note changes. GLIDE moves the read head like tape, so the echoes bend in pitch on the way, at most an octave down or a fifth up, and land exactly on the new time: the classic pitch-bending effect (try the preset Glide Pitch Bender). FADE crossfades from the old time to the new one in 50 ms with no pitch change, best when you automate the time and want the echoes to stay in tune. Neither clicks.

How do I use it on an aux send?

Insert it on a return track (an aux, bus or FX channel), set MIX to 100 % so the return carries only the echoes, and switch on LOCK: with LOCK on, loading a preset leaves MIX where it is, so you can step through presets without the dry signal coming back. Then send each track to it with your DAW’s sends. For a throw, one word or one snare hit echoed and the rest dry, automate only the send: the echoes ring on after it closes. The Mix folder has ready-made aux returns at MIX 100 %.

Does it add latency?

No. Delay White reports no latency, so your DAW’s bypass needs no compensation and you can play live through it, and every echo still lands on its time. At MIX 0 % with OUTPUT at 0 dB the output is the input, bit for bit, and when the echoes have died away the output ends in true digital silence.

What presets does it come with?

44 factory presets in 9 folders: Default, Vocals, Guitars, Keys & Synths, Drums, Mix, Rhythmic, Ambient and Creative, from Vocal Slapback and Dotted Eighth Vocal to Wide Ping-Pong Pick, Hat Ping-Pong, Endless Hall Echo, Runaway Dub and three aux returns at MIX 100 %. They are set for an insert (MIX 8 to 40 %), and the synced ones follow your song’s tempo. Measured at 120 BPM on matching material, every insert preset comes out within −1.0 to +0.6 dB of the dry track. Save your own with SAVE.

VEIRA Delay White · Help · VEIRA