VEIRA Reverb Red
What does VEIRA Reverb Red do?
It models the classic studio steel plate, the plate of the four VEIRA colour reverbs, painted deep lacquered red: bright, dense from its first millisecond and smooth, with a shimmering top, for vocals and snare above all. DAMP sets how long it rings on the damper’s old 1-to-10 scale, TENSION and SIZE shape the plate, BRIGHTNESS its top, and PRE-DELAY or a synced NOTE, LOW CUT, MOD, WIDTH, DUCK, MIX with LOCK and OUTPUT fit it into a mix.
Which of the four colour reverbs should I choose?
All four have tempo-synced pre-delay, WIDTH, an equal-power MIX with LOCK for aux returns and the same meter bridge; what differs is the space they make. White is pristine: a modern algorithmic hall and room with four spaces, a decay you shape per band, DUCK and FREEZE, for natural, colourless space on anything. Red is the classic studio steel plate: bright, dense from the first millisecond and smooth, for vocals and snare above all. Gold is a studio echo chamber: a real room’s early reflections, low-mid warmth and the chain’s colour. Blue is the early-1980s digital rack reverb: lush, chorused halls and plates heard through the converters of the era.
What does DAMP mean, and why doesn’t 4 give exactly 2 seconds?
On a studio plate the damper is a felt pad moved towards or away from the steel; its scale ran from 1 (pressed close, about half a second) to 10 (let ring, about five and a half). DAMP keeps that scale, which reads roughly as seconds over two, about 0.55 s per step. The plate’s own losses at the top shorten the mid-band time a little, so the DECAY read-out under the knob always gives the real time: 2.37 s at the default 4.5.
What do TENSION and BRIGHTNESS do?
On a plate, high frequencies travel faster than low ones, so each reflection is a falling chirp. TENSION sets where that stops: a loose plate (0 to 30 %) chirps down into the lows, a singing, springy sound on low notes and drums; a tight one (65 to 100 %) keeps the lows focused, with the crossover from about 90 Hz to about 1 kHz. BRIGHTNESS sets the plate’s top: how fast the highs die against the mids and the pickups’ tilt, from a darker, older plate to the shimmer of a new one.
How do I keep a plate from muddying a vocal or the mix?
Raise LOW CUT on the plate to 150 to 220 Hz (it never touches the dry signal), and set DAMP so the plate has mostly died by the next phrase. If the words blur, give it 25 to 60 ms of PRE-DELAY or a synced NOTE, or raise DUCK, which keeps the plate down while you sing and lets it bloom in the gaps. For a plate that adds only air to a whole mix, try the Mix Bus preset Shine Plate, LOW CUT 600 Hz at MIX 7 %.
How do I use it on an aux send?
Insert it on a return track (an aux, bus or FX channel), set MIX to 100 % so the return carries only the reverb, and switch on LOCK: with LOCK on, loading a preset leaves MIX where it is, so you can step through presets without the dry signal coming back. Then send each track to it with your DAW’s sends, post-fader so the reverb follows the track’s fader. The Mix Bus folder has ready-made aux returns at 100 %.
Does it add latency?
No. Reverb Red adds no delay, so your DAW’s bypass needs no compensation and you can play live through it. At MIX 0 % with OUTPUT at 0 dB the output is the input, bit for bit, and when the music stops the tail ends in true digital silence.
What presets does it come with?
41 factory presets in 9 folders: Default, Vocals, Drums, Guitars, Keys & Synths, Strings & Orchestral, Post & Film, Creative and Mix Bus, from Classic Vocal Plate and Snare Plate to Big 80s Snare, Surf Plate, Metal Box and Aux Plate Return. Measured through the plugin, every preset’s 1 kHz reverb time is within 4 % of its design, and the insert presets come out within 1.3 dB of the dry track. You can save your own with SAVE.