VEIRA Vocoder

What is VEIRA Vocoder for?

It plays your words on another sound: sing or speak into it and a synth, a choir pad or another track seems to sing them. It has four carriers: AUTO, where its own synth follows the pitch you sing with up to four notes of harmony and no MIDI; SYNTH, played by MIDI notes; CHORD, which holds the chords you play; and SIDECHAIN, which uses another track. Six big knobs (BANDS, FORMANT, RESONANCE, SIBILANCE, ENSEMBLE and MIX) shape the sound, from robots and choirs to talk-box leads and whispers.

Do I need MIDI to use it?

No. A new instance opens in AUTO: put it on the vocal track and sing, and its synth follows your pitch, pulled to KEY and SCALE, so it sounds at once with no MIDI and no routing. Set KEY and SCALE to your song (until then the notes are pulled to C major), or choose CHROMATIC for the classic talking robot or FREE to follow every slide. The Init preset and every preset in Auto Harmony work this way. AUTO follows a single voice between about 70 and 1000 Hz, about 15 to 20 ms behind it.

How do I play it from MIDI notes?

Choose SYNTH (or CHORD) and send MIDI to the plugin on the vocal track. Hosts do this in one of three ways: a MIDI menu at the top of the plugin’s window where you choose the MIDI or instrument track; a MIDI track whose output you set to the vocal track and then to VEIRA Vocoder; or MIDI notes on the vocal track itself. The status line reads PLAY MIDI NOTES until notes arrive. Clicking the plugin’s own keyboard is a quick test before any routing. In hosts that sort Audio Units by kind, it is listed with the MIDI-controlled effects.

How do I use another track as the carrier?

Choose SIDECHAIN (or load Default ▸ Sidechain Carrier) and route the carrier track, a pad, an organ or a guitar, to the plugin’s side-chain input, called the key input in some hosts. The status line tells you where you are: CONNECT THE SIDE-CHAIN (the host hasn’t connected it), SIDE-CHAIN: NO SIGNAL (nothing is playing on it) or SIDE-CHAIN PLAYING. Bright, sustained sounds speak best. A stereo carrier is mixed to mono, and the stereo image comes from WIDTH, ENSEMBLE and SPACE.

What do KEY, SCALE and HARMONY do?

They set what AUTO plays. KEY and SCALE choose the notes your voice is pulled to: CHROMATIC (every semitone), MAJOR, MINOR, HARM MINOR, DORIAN, MAJOR PENT, MINOR PENT, or FREE (no pulling at all). HARMONY adds notes to the one you sing, up to four in all: OCTAVE DOWN, POWER, THIRDS, TRIAD, SEVENTH and CHOIR. The added notes are steps of the scale, so they always fit the key. They do nothing in SYNTH, CHORD or SIDECHAIN.

The words are hard to understand. What helps?

Raise BANDS to 24 to 32, keep UNVOICED up (on s, t, f and sh it turns the carrier to noise, as the voice does), keep SIBILANCE at 50 % or a little higher, keep the band RELEASE in VOICE short, and use a bright wave such as SAW or SUPERSAW. Default ▸ Clear Speech is set up this way. A dull carrier, such as a soft pad on the side-chain, gives softer words, because the vocoder can only shape sound the carrier has.

I sing and hear nothing. Why?

The carrier is silent, and a vocoder only sounds while its carrier does. Look at the status line in CARRIER: PLAY MIDI NOTES or PLAY A CHORD means SYNTH or CHORD is waiting for notes; CONNECT THE SIDE-CHAIN or SIDE-CHAIN: NO SIGNAL means SIDECHAIN has no carrier. Choose AUTO, or load Default ▸ Init, to hear it with no routing at all. If the VOICE meter in LEVELS doesn’t move, no audio is reaching the plugin.

Does it add latency?

Not with BANK, the classic filter bank, which is the default: you can sing through it while recording. SPECTRAL, the engine with the smoothest highs, delays the sound by 1024 samples at 44.1 and 48 kHz (about 21 ms at 48 kHz) and 2048 at 88.2 and 96 kHz. It reports this to your DAW, which compensates, and the dry voice and the host’s bypass are delayed to match. The line under the ENGINE keys shows the latency in use.

What presets does it come with?

53 factory presets in 8 folders: Default, Classic Robot, Choir & Pads, Talkbox Style, Strings & Synths, Auto Harmony, Whisper & Noise and Creative FX, from Speaking Robot and Deep Android to Vocoder Choir, Talkbox Lead, String Machine, Auto Minor Choir, Whisper and Formant Giant. Each preset’s note says what it needs: only a voice (the Auto presets), MIDI notes, or a carrier on the side-chain. You can save your own with SAVE.

VEIRA Vocoder · Help · VEIRA