VEIRA Comp Red
What does VEIRA Comp Red do?
It is a fast FET compressor, the punchy one of the four VEIRA colour compressors, painted deep lacquered red, in the tradition of the classic FET studio compressor. INPUT drives the signal into a fixed threshold and OUTPUT sets the level; ATTACK runs from 800 down to 20 microseconds and RELEASE from 1.1 s down to 50 ms; ratio buttons 4, 8, 12 and 20, and ALL. The FET’s bite grows with the compression. A meter shows GR or the output at +4 or +8, and MIX and SC HPF bring it into the modern session.
Which of the four colour compressors should I choose?
All four have a parallel MIX and show the reduction over your music; what differs is the kind of compressor. White is clean: an exact curve, LOOKAHEAD and an external key. Red is punchy: a fast FET for drums, rock vocals, bass that should growl and room mics, when you want to hear the compressor. Gold is warm: a tube optical leveller for vocals and bass that should sit still. Blue is vintage: a vari-mu for mix-bus and master glue. Red before Gold on a vocal is a classic chain.
Where is the threshold knob?
There isn’t one, as on the original: the threshold is fixed, and INPUT (−24 to +36 dB) decides how hard your signal is driven into it. Turn INPUT up for more compression and more of the FET’s colour, then set OUTPUT for the level. Each ratio has its own threshold and knee, and the HISTORY and TRANSFER displays draw where the threshold lands on your input.
Why do ATTACK and RELEASE turn the wrong way?
They turn the original’s way: clockwise is faster. SLOW is printed at the left end of each scale and FAST at the right. ATTACK runs from 800 µs to 20 µs and RELEASE from 1.1 s to 50 ms; even the slowest attack is under a millisecond. Right-click a knob to type an exact value.
What does ALL do?
ALL presses all four ratio buttons at once, the famous all-buttons trick: the knee drops to −16 dB and widens to 10 dB, beyond it the output falls slightly as the input rises (over-compression), the attack is three times slower so the hit gets through before it slams, the release is quicker and the FET distorts about three times as much. It is aggressive by design: try it on room mics and parallel drums, blended with MIX.
What do the METER buttons do?
As on the original, one meter does two jobs. GR shows the gain reduction from 0 to −20 dB; +4 and +8 show the output level on a VU scale, with 0 VU at −18 dBFS or −14 dBFS. The meter moves like a VU needle in every mode. The buttons change nothing in the sound.
Does it add latency?
Yes: 48 samples at every sample rate (1.0 ms at 48 kHz), from the filters that run everything non-linear at four times the sample rate. It is constant, reported to your DAW, which compensates automatically, and the host’s bypass and MIX’s dry signal are delayed by the same amount, so parallel compression stays phase-coherent.
What presets does it come with?
36 factory presets in 9 folders: Default, Vocals, Drums, Bass, Guitars, Keys, Mix Bus, Mastering and Creative, from Vocal Forward and Snare Crack to Room Mics All In and All Buttons Smash. INPUT sets each preset’s reduction for its job and OUTPUT level-matches it to bypass within 0.05 dB, except three whose hits jump through first. If your track is hotter or quieter than the presets assume, move INPUT by the difference first. You can save your own with SAVE in the preset bar.