VEIRA Metering Suite

What is VEIRA Metering Suite for?

It is a meter: it measures the sound passing through it and changes nothing. Put it on your master bus (or any track) and it shows how loud your mix is in LUFS and how that compares with the target of where it’s going, such as a streaming service, a TV broadcaster, a film platform, a podcast app or a game. It also has true peak, level, VU, spectrum and stereo meters in one window.

How do I check a master for Spotify?

Put the meter last on the master bus, after your limiter, and load the preset Music Streaming ▸ Spotify. Play the song from start to end (or bounce it offline with the meter on the master), then read INTEGRATED, TRUE PEAK MAX and PLAYBACK GAIN. A negative PLAYBACK GAIN is how much Spotify will turn the master down.

Which loudness targets does it know?

TARGET offers 19 standards grouped by destination (Music streaming, Broadcast, Film & video, Podcast & speech, Games), plus Custom. Choosing one sets LUFS, TRUE PEAK and TOLERANCE to its values at once; the default is Spotify -14. The 26 factory presets in 6 folders set a target and a view for common destinations.

What is the difference between MOMENTARY, SHORT-TERM and INTEGRATED?

MOMENTARY is the loudness of the last 400 ms, SHORT-TERM the last 3 seconds, and INTEGRATED the whole programme since the measurement started, all updated every 100 ms. INTEGRATED is the single number delivery specifications and streaming services use, and it is gated so silence and quiet passages don’t drag it down.

Why does PLAYBACK GAIN sometimes not appear?

PLAYBACK GAIN appears only for streaming services that normalise. For specifications (broadcast, film, podcast, games, AES77) and for Custom targets, the line reads DELIVERY with a verdict instead: PASSES, TOO LOUD, TOO QUIET or TRUE PEAK TOO HIGH.

I chose a standard, but the target now says Custom. Why?

Turning LUFS, TRUE PEAK or TOLERANCE by hand, even slightly, makes the target Custom. Choose the standard again in the TARGET menu to restore its values. Changing the target never changes the sound or the measurement itself, only the verdicts and warnings.

The integrated loudness doesn’t move and the panel says HOLD. What’s wrong?

Nothing: your DAW’s transport is stopped and HOLD ON STOP is on (the default), so the programme measurement waits for playback. Press play, or turn HOLD ON STOP off to measure all the time, for example for live input. Use RESET to start a new measurement, or RESET ON PLAY to start one each time playback starts.

Does the meter change the sound or add latency, and does it work in mono?

No. The output is the input, bit for bit, with no latency at any buffer size. It works on mono and stereo tracks; a mono signal is measured as one channel per BS.1770, so it reads 3 dB quieter than the same audio as a stereo file. That’s why the Podcast Mono preset aims at −19 LUFS instead of −16.

My reading differs from another meter or from the service’s analysis. Why?

Check that both measured the same thing: the whole programme from start to end, at the same point in the chain, after every plugin. Differences usually come from measuring a different section, a meter placed before the limiter, or a service measuring its encoded file. True peak can differ by a fraction of a dB between meters.