VEIRA Analog Delay

What is VEIRA Analog Delay for?

VEIRA Analog Delay is a bucket-brigade analog delay for anything from a slapback on a guitar or a voice to warm lead echoes, choruses, long dub trails and self-oscillating sirens. The repeats get darker as they fade, so they sit behind the dry sound instead of competing with it, and the longer the delay, the darker and grainier they are. It has no latency, so you can also use it while you record.

Why are the long delays darker?

That’s the bucket brigade. DELAY sets the speed of the chips’ clock, and a long delay is a slow clock, so the chips’ filters close down with it: about 8 kHz up to 170 ms, 3.9 kHz at 350 ms, 2.3 kHz at 600 ms and 1.35 kHz at 1 s, as on the analog units. TONE only adds its own filter on top. For brighter repeats, use a shorter DELAY (or a shorter NOTE with SYNC) and more REPEATS.

Why does the pitch of the echoes bend when I turn DELAY?

Turning DELAY changes the speed of the chips’ clock, and everything already in the chips comes out at a different speed from the one it went in at: lower while the delay gets longer, higher while it gets shorter. The clock glides over about a second and never plays backwards. Sweep DELAY for dives, rises and sirens; if you don’t want the bend, change it between phrases. A tempo change with TEMPO at SYNC bends the echoes the same way.

How do I put the echoes in time with my song?

Flip the TEMPO switch up to SYNC and choose a NOTE: it sets the delay as a note value of your DAW’s tempo, from 1/64 to a whole note with dotted and triplet values, and the DELAY knob is dimmed. The delay never goes over 1 s, the longest the chips do, so at slow tempos the longest note values are held at 1 s (at 120 BPM, a 1/2 is exactly 1 s).

The echoes keep growing and won’t stop. What’s wrong?

REPEATS is past about 106 %, so the loop is self-oscillating: each repeat comes back louder until the chips’ saturation holds it, and the echoes never pass −1 dBFS. Turn REPEATS below 100 % and they die away. It’s a sound in its own right: the presets Dub Siren Runaway, Self Oscillation Drone and Infinite Hold Loop start there, and you can sweep DELAY while it runs for a siren.

Why doesn’t MOD do anything on my long delay?

Where MOD RATE × DELAY is a whole number, for example 1 Hz at 1 s, the modulation makes a whole number of cycles while the sound is in the chips, and the pitch swing cancels, as it does on the real units. Move MOD RATE a little and the movement comes back. Elsewhere, MOD DEPTH sets the echoes’ pitch swing, about ±50 cents at 10, at any DELAY.

Which preset should I start from?

VEIRA Analog Delay comes with 75 factory presets in 14 folders: Default (Init), Drums, Bass, Guitar, Keyboards, Strings, Brass, Woodwinds, Vocals and Mix Bus, plus Sends (MIX 100 % for an aux), Rhythmic (SYNC eighths, dotted, triplets, sixteenths and halves), Dub and Creative FX. Start from your instrument’s folder and hover over the preset display to read its note, which says what to set first. The insert presets come out within half a dB of bypass.

VEIRA Analog Delay · Help · VEIRA