VEIRA Reverb White
What does VEIRA Reverb White do?
It is a modern algorithmic reverb, the pristine one of the four VEIRA colour reverbs, painted pearl white: huge, clean and lush halls and rooms with dense, colourless early reflections and a smooth tail that never rings. Choose a SPACE (ROOM, HALL, LARGE HALL or CATHEDRAL), set DECAY from 0.2 to 20 s and shape how the lows and highs die away with LOW and HIGH. PRE-DELAY or a synced NOTE, EARLY/LATE, DIFFUSION, MOD, WIDTH, LOW CUT, HIGH CUT, DUCK, FREEZE, MIX with LOCK and OUTPUT complete it.
Which of the four colour reverbs should I choose?
All four have tempo-synced pre-delay, WIDTH, an equal-power MIX with LOCK for aux returns and the same meter bridge; what differs is the space they make. White is pristine: a modern algorithmic hall and room with four spaces, a decay you shape per band, DUCK and FREEZE, for natural, colourless space on anything. Red is the classic studio steel plate: bright, dense from the first millisecond and smooth, for vocals and snare above all. Gold is a studio echo chamber: a real room’s early reflections, low-mid warmth and the chain’s colour. Blue is the early-1980s digital rack reverb: lush, chorused halls and plates heard through the converters of the era.
How do LOW and HIGH shape the decay?
DECAY is the reverb time in the mids. LOW multiplies it below LOW X (0.25 to 2.50×) and HIGH above HIGH X (0.10 to 1.50×). The default, LOW 1.20× below 250 Hz and HIGH 0.55× above 4.50 kHz, is a natural hall: warm lows, a top that dies sooner. Unlike an EQ after the reverb, this changes how fast each band dies, so the start of the tail stays bright and its end darkens. The legend of the DECAY display gives the resulting times at 125 Hz, 1 kHz and 8 kHz.
What do DUCK and FREEZE do?
DUCK turns the reverb down while you play, up to 24 dB, and lets it bloom back in the gaps, so a long hall stays clear of the words. It follows how near the input is to its own recent peak, so it works at any level; 15 to 35 % is a gentle clean-up, 100 % a swell effect. FREEZE holds the tail exactly as it is for as long as it is on, within 0.05 dB over 15 s, and keeps new sound out of it: hold a chord, press FREEZE and play over the frozen pad.
How do I sync the pre-delay to the song?
Switch on SYNC. PRE-DELAY dims and NOTE takes over: a note value at your DAW’s tempo, from a sixty-fourth to a half note with triplets and dotted values, up to 2 s. A sixteenth at 120 BPM is 125 ms. Synced pre-delay puts the start of the reverb on the song’s grid; the presets Synced Room and Synced Echo Space use it. A new time crossfades over 20 ms, so you can change it while the music plays.
How do I use it on an aux send?
Insert it on a return track (an aux, bus or FX channel), set MIX to 100 % so the return carries only the reverb, and switch on LOCK: with LOCK on, loading a preset leaves MIX where it is, so you can step through presets without the dry signal coming back. Then send each track to it with your DAW’s sends, post-fader so the reverb follows the track’s fader. The Mix Bus folder has ready-made aux returns at 100 %.
Does it add latency?
No. Reverb White adds no delay, so your DAW’s bypass needs no compensation and you can play live through it. At MIX 0 % with OUTPUT at 0 dB the output is the input, bit for bit, and when the music stops the tail ends in true digital silence.
What presets does it come with?
46 factory presets in 9 folders: Default, Vocals, Drums, Guitars, Keys & Synths, Strings & Orchestral, Post & Film, Creative and Mix Bus, from Vocal Hall and Drum Room to Concert Hall, Stairwell, Endless Pad and Aux Hall Return. They are set for an insert (MIX 15 to 35 %) except the Mix Bus folder. Measured through the plugin, the 1 kHz reverb time of every preset but one is within 3 % of its design. You can save your own with SAVE.