VEIRA Multiband Gold
What does VEIRA Multiband Gold do?
It is the smooth one of the four VEIRA colour multiband compressors, painted brushed champagne gold. It splits your sound into four bands and holds each with an optical-style cell: THRESHOLD, RATIO (1:1 to 20:1, a wide 10 dB soft knee), ATTACK, RELEASE and MAKEUP or AUTO, and after long, heavy compression the band lets go with a soft tail instead of pumping. Each band works on both channels, its Mid or its Side, and has SOLO and BYPASS on its card. Three crossovers are dragged on the BANDS display; it adds no latency by default, or works in LINEAR PHASE, and EXT KEY lets each band listen to the same band of a sidechain.
How do I set the crossovers?
Drag the three handles at the bottom of the BANDS display; double-click one for its default. Crossover 1 runs from 30 to 500 Hz (default 120 Hz), crossover 2 from 200 Hz to 4 kHz (1 kHz) and crossover 3 from 1 to 16 kHz (5 kHz); they stay in order and at least 1.25 times apart. Put each where one job ends and the next begins, and use SOLO (the headphones on each band’s card) to hear a band alone while you drag. SOLO is a listening aid: offline bounces always leave it out. With zero latency the four bands add up flat, 0.0000 dB from 25 Hz to 18 kHz.
How is the release different from other compressors?
Each band lets go like an optical cell. A fast part follows your ATTACK and RELEASE; a slow part holds up to 30 % of the reduction, charges over about 0.3 s while the band stays loud, and lets go over five times RELEASE. After a short hit only the fast part has moved, so the band is back at RELEASE; after long, heavy compression it comes back with a soft tail instead of pumping. Measured with ATTACK 20 ms and RELEASE 200 ms after 2 s of 27 dB: 63 % in 20 ms, half released in 147 ms, 90 % in 1.1 s. If a band stays down too long, shorten its RELEASE or raise its THRESHOLD.
What does AUTO do?
AUTO sets a band’s MAKEUP for you from its THRESHOLD and RATIO: half of what the band’s curve takes from a full-scale (0 dBFS) sine. With the defaults, THRESHOLD −24 dBFS at 2.5:1, the curve takes 14.4 dB at 0 dBFS, so AUTO gives back 7.2 dB. It doesn’t depend on the level of your track, so it never pumps; it keeps the band near its own level while its range shrinks. With AUTO on, the MAKEUP knob’s own setting isn’t used.
When should I use LINEAR PHASE?
By default the crossovers add no latency: the four bands add up flat in level, with an analog crossover’s phase turns near the crossover frequencies, which is right while recording, on single tracks and on most buses. LINEAR PHASE splits the bands with linear-phase filters that add up to a pure delay, so the waveform keeps its shape; use it on a master or a mix bus, as every Mastering preset does. It costs 1152 samples of latency at 44.1 and 48 kHz (24 ms at 48 kHz; 2304 at 96 kHz, 4608 at 192 kHz), reported to your DAW. Because it changes the latency it isn’t automatable: set it before you play.
What do Stereo, Mid and Side do in a band?
Each band has its own STEREO menu. Stereo detects both channels together and gives them the same gain, so the image never moves. Mid detects and changes only the centre of the band (left plus right), makeup included, and Side only its sides (left minus right); the other part passes with no change, 0.0000 dB in the test. Use Mid to hold a centred bass or kick without touching the width above it, and Side to even out wide guitars, pads or cymbals; Mix Side Control and Master Mid Side Glue are made this way.
How do I use EXT KEY?
Route the key, a kick for example, to VEIRA Multiband Gold’s sidechain input in your DAW (it accepts a mono or stereo key), then switch EXT KEY on. Every band then listens to the same band of the key: band 1 of your bass to band 1 of the kick, and so on. Set only the bands that should duck, as the Sidechain presets do: Kick Ducks Bass ducks band 1 alone. In the test a kick on the key ducked band 1 by 16 dB. The Sidechain presets duck by design, so they come out quieter than they go in.
What presets does it come with?
40 factory presets in 10 folders: Default, Drums, Bass, Guitar, Keyboards, Vocals, Mix Bus, Mastering, Sidechain and Creative FX, from Drum Bus Control, Bass Even Lows and Vocal Smooth to Mix Glue Four Band, Master Loud Glue, Kick Ducks Bass and Heavy Squash. They were made on tracks peaking at −8 dBFS, drums and buses at −4 dBFS and premasters at −3 dBFS, so on your material set each band’s THRESHOLD by its card’s reduction. Every preset but Init and the Sidechain folder is level-matched to bypass within 0.05 dB, and every Mastering preset uses LINEAR PHASE.