VEIRA Chambers

What is VEIRA Chambers for?

VEIRA Chambers is an echo-chamber reverb: a speaker, two microphones and ten real-sized rooms, each with all six surfaces made of one material, from glass and three woods to three stones, concrete, brick and plaster. Use it to give a track or a whole mix a sense of space, from a tight drum room to a long, silky vocal chamber. A SATURATION fader can add vintage harmonic colour to the reverb only.

Which chamber or preset should I start with?

A fresh instance (Default ▸ Init) opens in the plaster chamber, the smooth vintage studio chamber. Choose a chamber for its shape and then set the length with DECAY: the woods (BUBINGA, OAK, CEDAR) are short and warm and safest on a busy mix, the stones (GRANITE, MARBLE, SANDSTONE) are big and long, and CONCRETE is the reference studio chamber. For a ready-made start, load a preset for your instrument, or one from Classic Chambers if you're using it on an aux.

Should I use it on an insert or on a send?

On an insert, put it on the track and set MIX by ear: 10–30 % on single tracks, 5–10 % on a mix bus, 3–8 % on a master. On an aux return, set MIX to 100 %, because the dry signal already reaches the mix through its own channel; the Classic Chambers presets are already set this way. A send lets several tracks share one room and saves CPU, since one chamber serves ten tracks instead of ten.

What's the difference between SIZE and DECAY?

SIZE (50 to 200 %) scales the whole room, so the echoes arrive later and the tail gets longer, like a bigger building. DECAY (25 to 400 %) only changes how long the tail lasts, as a share of what the chamber does by itself, while keeping the chamber's own shape across frequency. The resulting mid reverb time is shown as RT60 MID at the top right of the chamber view.

What do DIFFUSION and the TOTEMS key do?

DIFFUSION stands up to six fabric panels (totems) in the room, about one more for every 17 %. They smear the early echoes into a smoother, denser wash and make the room a little shorter and darker; two or three totems (DIFFUSION 30–50 %) usually cure a slappy sound in glass, marble or granite. The TOTEMS key takes them all out and puts them back at the same setting, so you can compare.

Does SATURATION change my dry sound?

No. SATURATION adds exact 2nd and/or 3rd harmonics (chosen with the 2ND, 3RD and 2+3 keys) only to the chamber's return, and at 100 % they sit 12 dB under the reverb. At MIX 0 % the output is the input, bit for bit, whatever SATURATION is set to. 10–25 % is usually plenty.

Does VEIRA Chambers add latency? Can I use it on a mono track?

It has no latency: the dry signal passes untouched. It works in mono, stereo, and mono in / stereo out, so on a mono track most DAWs let you insert it as mono in / stereo out and the chamber returns in stereo.

I hear no reverb at all. What should I check?

Check MIX, since 0 % is the dry signal only, and on an aux check that the tracks' send levels are up. The speaker in the chamber view glows when the chamber is receiving sound; if it stays dark, nothing is reaching the send. A very high LOW CUT with a very low HIGH CUT can also leave little for the room to play.

My track got louder and phasey on an aux, or the low end got muddy. Why?

On an aux, MIX below 100 % adds a second copy of the dry signal, so set MIX to 100 % or load a Classic Chambers preset. For a muddy low end, raise LOW CUT (150–300 Hz on most sources, higher on vocals), shorten DECAY, or choose a wood or glass chamber, whose lows are short; the stone chambers ring longest in the lows.