VEIRA Space
What is VEIRA Space for?
VEIRA Space is an algorithmic reverb with eight classic types: hall, plate, room, chamber, cathedral, ambience, spring and gated. Its special feature is CLEAN, an automatic cleanup that finds the frequencies ringing in the reverb and turns them down only while they stick out, so the space stays and the ringing goes. DUCK, FREEZE, tempo-synced PRE-DELAY and SHIMMER are built in.
Which type or preset should I start with?
A fresh instance (Default ▸ Init) is a Hall, the all-rounder for vocals, strings and piano. Plate adds sheen to vocals and snares without placing them far away, Room puts dry close-miked sources in a believable space, and Ambience gives space without a tail for dialogue, a mix bus or the master. For a ready-made start, load a preset for your instrument, or one from the Sends folder if you're using it on an aux.
Should I use it on an insert or on a send?
On an insert, set MIX by ear: 10–30 % on single tracks, 5–10 % on a mix bus, 3–5 % on a master. On an aux return, set MIX to 100 %, because the dry signal already reaches the mix through its own channel; the Sends presets are already set this way. A send lets several tracks share one space and saves CPU, with one reverb for many tracks.
How do I set CLEAN and SHARPNESS?
CLEAN sets how much of the ringing is taken away: 30–50 % suits most material and 50–60 % sustained vocals and piano, while drum presets use 10–20 % because a room's tone is part of a drum sound. SHARPNESS sets what counts as ringing: low settings also catch broad bumps such as mud, high settings cut only narrow rings. Press LISTEN to hear only what CLEAN removes; you should hear thin, whistling tones, and if you hear the body of the reverb, CLEAN is too high or SHARPNESS too low.
What does FIND do, and why didn't it do anything?
FIND listens to the last 3 seconds of reverb and places six notches on its strongest resonances, inside the CLEAN range shown on the display. It needs reverb to listen to, so play a few seconds of your material through the plugin first, then press it, and check the range grips on the display. Afterwards you can drag a handle, scroll on it to change its width, or double-click it to switch it off.
What do DUCK and FREEZE do?
DUCK (0 to 100 %, up to 30 dB) turns the reverb down while the dry sound is playing and lets it bloom back in the gaps, so a part stays clear in a big space; start at 20–40 % on vocals and solo instruments. FREEZE holds the reverb exactly as it is for as long as it's on, so you can play over a frozen chord; turn it off and the tail fades at its normal DECAY. On an aux, DUCK reacts to everything sent to it together.
Does VEIRA Space add latency? Can I use it on a mono track?
It adds no latency, CLEAN included, and at MIX 0 % the output is bit-identical to the input. It works in mono, stereo, and mono in / stereo out.
I hear thin whistling tones and no reverb. What's wrong?
LISTEN is on: it plays only what CLEAN removes. Switch it off to hear the result; it never reaches an offline bounce, as it switches itself off for offline bounces.
The reverb never stops, or sounds thin after CLEAN. Why?
If it never stops, FREEZE is on and holding the tail; switch it off, and remember a very long DECAY (up to 20 s) with SHIMMER can also ring for a long time by design. If it sounds thin or hollow, CLEAN is too high or SHARPNESS too low for this material: lower CLEAN, raise SHARPNESS, and use LISTEN to check that only ringing comes out.