VEIRA Space

An algorithmic reverb that takes the ringing out and leaves the space.

$149.99, a one-time purchase with free updates

VEIRA Space with the Init preset edited, while a vocal and a snare play: the CLEAN display with the reverb’s spectrum, what CLEAN removes in red and six notches placed by FIND, the SHAPE display of a Hall with its LOW, MID and HIGH RT60 at 3.02, 2.73 and 1.50 s, the IN and OUT meters with short-term and integrated loudness, and the controls with HALL selected, DECAY at 2.80 s, CLEAN at 60 % and MIX at 35 %.

VEIRA Space is an algorithmic reverb for vocals, instruments, drums and sends, with eight classic types: hall, plate, room, chamber, cathedral, ambience, spring and gated. A pre-delay that can follow the tempo, decay per band, modulation, shimmer, freeze and ducking are built in, so the same plugin gives you a short room on a kit, a plate on a vocal or a long shimmer behind a pad.

What sets it apart is the cleanup. Every reverb rings at some frequencies more than others, and the notes you play make it ring more. CLEAN listens to the reverb and turns those frequencies down only while they stick out, so the space stays and the ringing goes, and six notches placed by FIND take care of the rest. You can watch what it removes as it happens, and it adds no latency.

A tour of VEIRA Space

VEIRA Space with the Init preset edited, while a vocal and a snare play: the CLEAN display with the reverb’s spectrum, what CLEAN removes in red and six notches placed by FIND, the SHAPE display of a Hall with its LOW, MID and HIGH RT60 at 3.02, 2.73 and 1.50 s, the IN and OUT meters with short-term and integrated loudness, and the controls with HALL selected, DECAY at 2.80 s, CLEAN at 60 % and MIX at 35 %.
  1. The whole of VEIRA Space

    VEIRA Space is an algorithmic reverb with eight classic types, from Hall and Plate to Spring and Gated, and a cleanup made for the reverb’s output. Every reverb rings at some frequencies more than others; CLEAN listens to the reverb and turns those frequencies down while they stick out, so the space stays and the ringing goes. Six notches do the same by hand, and FIND places them for you.

  2. What CLEAN takes out

    The reverb in amber, the cleaned reverb in light amber, and in red what is being removed right now. The teal curve is the six notches.

  3. Notches on the resonances

    FIND puts the six notches on the reverb’s strongest resonances. Drag a handle for its frequency and cut, scroll on it for its width.

  4. How the reverb unfolds

    The pre-delay, the early reflections and the decay of the lows, mids and highs, with their reverb times.

  5. In and out

    Peak and RMS for the input and the output, with short-term and integrated loudness.

  6. Type, space, tone and cleanup

    Eight types, the knobs that shape the space and its tone, then motion, ducking, the cleanup and the output.

What VEIRA Space does for you

The TYPE buttons: HALL (lit), PLATE, ROOM, CHAMBER, CATHEDRAL, AMBIENCE, SPRING and GATED.

Eight classic reverbs

Hall, Plate, Room, Chamber, Cathedral, Ambience, Spring and Gated, each built the way its kind is: a 16-line network for the rooms and halls, a tank of cross-coupled loops for Plate, and two loops of 100 stretched allpasses for Spring, so every echo chirps as in a real tank. Every type and size comes back at about the same level, and changing type while playing lets the old one ring out over half a second.

  • 8 types
  • Levels within 2 dB
  • Type changes ring out
The CLEAN display: the reverb’s spectrum in amber, the cleaned reverb in light amber, what CLEAN removes in red, the six notches in teal and the CLEAN RANGE from 120 Hz to 10 kHz.

The space stays, the ringing goes

Every reverb rings at some frequencies more than others, and the notes you play make it ring more: a sung A leaves an A hanging in the hall. CLEAN listens to the reverb and turns those frequencies down only while they stick out above their surroundings. The display shows the reverb in amber, the cleaned reverb in light amber, and in red what is being taken away right now. A tone ringing in the Hall comes down by 14.7 dB at 100 %, while the reverb around it moves by less than 0.5 dB.

  • −14.7 dB on a ringing tone
  • The rest within 0.5 dB
  • No latency
The CLEAN section: CLEAN at 60 %, SHARPNESS at 50 %, FIND and LISTEN.

Broad or surgical, and hear what goes

SHARPNESS sets what counts as ringing. Low compares each frequency with 1.5 octaves around it, so broad build-ups such as low-mid mud go too; high compares it with its close neighbours, down to 1/6 octave, for a gentler cut of narrow ringing only. Press LISTEN to hear only what CLEAN takes away, so you can check it’s the ringing and nothing else, and drag the edges of the CLEAN RANGE on the display to keep it where you want it.

  • 1.5 to 1/6 octave
  • LISTEN to what goes
  • Left out of bounces
The six numbered notch handles placed by FIND on the reverb’s resonances between about 200 Hz and 1.2 kHz, above the red of what CLEAN takes away.

Six notches, placed for you

For ringing you want gone all the time, six notches cut up to 30 dB with a Q from 0.5 to 30. FIND listens to the last 3 seconds of reverb and puts them on its six strongest resonances, cut deepest on the strongest. Drag a numbered handle for its frequency and cut, scroll on it for its width, and double-click the plot to place the next free notch.

  • Up to −30 dB
  • Q 0.5 to 30
  • FIND
The SHAPE display for a Hall: the pre-delay, the early reflections, and the decay of the lows, mids and highs, with LOW RT60 3.02 s, MID RT60 2.73 s, HIGH RT60 1.50 s and PRE-DELAY 24 ms.

See how the reverb unfolds

SHAPE draws the reverb from your settings: the pre-delay, the type’s early reflections, then the decay of the lows, mids and highs down to −60 dB, with their reverb times underneath. BASS sets the lows’ time against DECAY, from 0.5 to 2 ×, and DAMPING shortens the highs above DAMP FREQ to as little as 15 % of it. On Gated it shows the gate’s cut, and with FREEZE on, the held tail.

  • RT60 for lows, mids and highs
  • BASS 0.5–2.0 ×
  • DAMP FREQ 1–16 kHz
The SPACE knobs: PRE-DELAY at 24 ms, DECAY at 2.80 s, SIZE at 50 %, DIFFUSION at 70 % and EARLY at 50 %.

Size, decay and a pre-delay in time

PRE-DELAY holds the reverb back by up to 500 ms, or with SYNC on follows the song’s tempo as a NOTE from 1/64 to 1/4, triplets and dotted included. DECAY sets the reverb time in the mids, SIZE scales the space from half to about twice the type’s own size and glides while you play, DIFFUSION smooths the start into a denser wash, and EARLY sets the level of the early reflections. LOW CUT and HIGH CUT filter the reverb only.

  • Decay 0.1–20 s
  • Tempo-synced pre-delay
  • SIZE glides
The MOTION section: MOD at 30 %, RATE at 0.60 Hz, SHIMMER at 0 %, PITCH at +12, and FREEZE.

Movement, shimmer and freeze

MOD moves the reverb’s delay lines slowly, at a RATE from 0.05 to 5 Hz, which keeps the tail from sounding metallic. SHIMMER feeds the reverb back through a pitch shifter, so the tail climbs by PITCH on every pass: an octave, a fifth, a fourth, an octave and a fifth, two octaves, or an octave down. It builds and fades but never runs away. FREEZE holds the reverb for as long as it’s on and keeps new sound out, so you can play over a frozen chord.

  • Six shimmer intervals
  • Never runs away
  • FREEZE
The OUTPUT section: WIDTH at 100 %, MIX at 35 % and OUTPUT at 0.0 dB.

Duck it, then blend it

DUCK turns the reverb down while you play, by up to 30 dB, and lets it bloom back in the gaps; it follows your material’s own peaks, so it works at any level. WIDTH goes from mono to wider than the reverb itself, MIX blends dry and reverb at equal power (100 % on an aux return), and OUTPUT trims the result. There’s no latency, cleanup included, and at MIX 0 % the output is the input, bit for bit.

  • DUCK up to 30 dB
  • Zero latency
  • Bit-exact at MIX 0 %
The preset browser with previous, next and Save, showing Init, edited, in the Default folder.

73 presets, each one measured

Thirteen folders, from Drums, Vocals and Keyboards to Mix Bus and Mastering, plus Sends (nine aux-return presets at MIX 100 %, every type at least once) and Creative FX (shimmer, dub spring, gated drums, a ducked swell, an octave-down drone). Track presets change the level against bypass by at most 0.25 dB, every reverb time sits in its stated window, and no preset peaks above −3 dBFS.

  • 13 folders
  • Save your own
  • Recalled with your session

Get VEIRA Space

Pay once and it’s yours, with every future update included.

VEIRA Space

An algorithmic reverb that takes the ringing out and leaves the space.

  • Yours to keep: pay once, no subscription
  • Every future update, free for life
  • VST3, AU, Standalone on up to 3 computers
  • Changed your mind? Cancel within 14 days (refunds)
USD

One-time payment, in your cart.

Welcome offer

Get 10% off your first order

Leave your email and we’ll send you a code for 10% off your first order, on any plugins. One code per person.

Specifications

Type
Algorithmic reverb with eight types (Hall, Plate, Room, Chamber, Cathedral, Ambience, Spring, Gated), automatic resonance cleanup (CLEAN) and six notches
Pre-delay
0 to 500 ms, or with SYNC a NOTE from 1/64 to 1/4 (triplets and dotted) at the song’s tempo, up to 2 s
Decay
0.1 to 20 s (RT60 in the mids); on Gated, the gate’s length
Size, diffusion, early
0 to 100 % each; SIZE from half to about twice the type’s own size
Tone
BASS 0.5 to 2.0 × below about 250 Hz; DAMPING 0 to 100 % above DAMP FREQ (1 to 16 kHz)
Filters
LOW CUT 20 Hz to 2 kHz and HIGH CUT 1 to 20 kHz (fully up = open), 12 dB/oct, on the reverb only
Motion
MOD 0 to 100 % at RATE 0.05 to 5 Hz; SHIMMER 0 to 100 % with PITCH +12, +7, +5, +19, +24 or −12; FREEZE
Duck
0 to 100 % (up to 30 dB), following the material’s own peaks
Clean
CLEAN and SHARPNESS 0 to 100 %, in a range set from 20 Hz to 20 kHz; LISTEN; six notches to −30 dB, Q 0.5 to 30, placed by FIND or by hand
Output
WIDTH 0 to 150 %; MIX 0 to 100 % (equal power); OUTPUT −24 to +12 dB
Latency
None, cleanup included; at MIX 0 % the output is the input, bit for bit
Metering
Reverb spectrum with what CLEAN removes and the notches; SHAPE with RT60 per band; IN and OUT peak and RMS; short-term and integrated LUFS
Presets
73 factory presets in 13 folders (including Sends and Creative FX), plus your own
Channels
Mono, stereo, or mono in and stereo out
Formats
VST3, AU, Standalone
macOS
macOS 11 or later, Apple silicon or Intel (universal). VST3, AU and Standalone.
Windows
Windows 10 or later, 64-bit. VST3 and Standalone.
Pro Tools
Pro Tools (AAX) versions are built and tested, and arrive once they’re signed for Pro Tools.
Latest version
0.2.0, released October 31, 2026 · What’s new

Read more on the blog: Reverb without mud: how to give a mix space and keep it clear · Reverb in a mix: building the space with sends, pre-delay and decay

Questions? 9 answers about VEIRA Space

Works well with

VEIRA Chambers

An echo-chamber reverb you can watch: ten real rooms, ten materials.

$179.99

VEIRA EQ

A dynamic equaliser with up to 24 bands and an analyzer you can read.

$149.99

VEIRA DeEss

A de-esser that shows you every “s”.

$149.99