VEIRA Chambers

An echo-chamber reverb you can watch: ten real rooms, ten materials.

$179.99, a one-time purchase with free updates

VEIRA Chambers in the plaster chamber: the lit room with its speaker, microphones and fabric totems, the decay display, the meter bridge, the harmonics meter and saturation fader, and the controls.

VEIRA Chambers is a reverb modelled on the echo chambers of classic studios: a speaker plays your send into a room, and two microphones pick up what the walls give back. There are ten chambers, each built from one material, from glass and marble to oak and brick, and each sounds the way its walls make it sound.

You shape the room itself, its size, its decay and where the microphones stand, and you can watch every reflection light up on the walls as it happens. A saturation fader adds harmonics to the reverb only, never to your dry signal, and the presets cover everything from drums and vocals to mastering.

A tour of VEIRA Chambers

VEIRA Chambers in the plaster chamber: the lit room with its speaker, microphones and fabric totems, the decay display, the meter bridge, the harmonics meter and saturation fader, and the controls.
  1. The whole of VEIRA Chambers

    VEIRA Chambers is an echo-chamber reverb. A speaker plays your send into a modelled room and two microphones pick up what the walls give back. Ten chambers, each built from one material, sound as their walls make them sound, a vertical fader adds exact harmonics to the reverb only, and you can watch every reflection light up on the walls as it happens.

  2. Look inside the room

    The chamber is drawn in its material and real size, with the speaker, the microphones and the totems where the reverb puts them. Every reflection the microphones hear lights up where it strikes, at the moment the sound gets there.

  3. Pick a material

    Ten chambers, each one room of a single material, from short warm cedar to long silky marble. Each button shows the surface it’s made of.

  4. Saturation on a fader

    The vertical fader adds exact 2nd, 3rd or both harmonics to the reverb only, and the meter above it shows how loud they are.

  5. The decay, in seconds

    Reverb time per octave from 63 Hz to 16 kHz at the current settings, beside the last six seconds of what goes in and what comes back.

  6. Level-matched by number

    IN and OUT in dBFS, with short-term and integrated LUFS and the difference in LU.

What VEIRA Chambers does for you

The plaster chamber in perspective: the speaker at one end, two fabric totems and the two microphones, with reflections glowing on the walls.

A real room, played back

A speaker plays your send into a modelled room and two microphones pick up what the walls give back. Early reflections are traced bounce by bounce, the tail is a dense, decorrelated stereo field, and while it plays you can watch every reflection light up where it strikes the walls.

  • Speaker and two microphones
  • Every reflection lit up live
  • Stereo tail
The ten chamber buttons, each showing its surface: glass, bubinga, oak, cedar, granite, sandstone, marble, concrete, brick and plaster.

Ten chambers, ten materials

Glass, bubinga, oak, cedar, granite, sandstone, marble, concrete, brick and plaster. Each room is built from one material’s measured absorption per octave, so glass rings bright with thin lows, wood is warm and short, and marble goes on and on. Changing rooms doesn’t jump in level.

  • Mid reverb 0.85 s (cedar) to 6.4 s (marble)
  • Measured absorption
  • Level-matched rooms
The ROOM controls: size, decay, mic and diffusion, each with its value.

Shape the room itself

SIZE scales the room, DECAY sets the reverb time against what the room does by itself, and MIC moves the microphones from near the speaker (early and clear) to the far end (later and more diffuse). DIFFUSION stands up to six fabric totems that smooth the early echoes into a denser wash; TOTEMS takes them out and puts them back.

  • Size 50–200 %
  • Decay 25–400 %
  • Up to six totems
The HARMONICS meter above the vertical SATURATION fader at 30 %, with the 2ND, 3RD and 2+3 keys.

Harmonics on the reverb only

The vertical SATURATION fader adds exact harmonics to the reverb and never to your dry signal: the 2nd for warmth, the 3rd for edge, or both. At 100 % they sit 12 dB under the reverb, whatever its level, and they can’t fold back into aliasing. The HARMONICS meter shows how loud they are.

  • 2nd, 3rd or both
  • Dry signal stays clean
  • No aliasing
The SEND controls: pre-delay, low cut and high cut.

Send it like a studio chamber

PRE-DELAY holds the sound back before it reaches the speaker, and LOW CUT and HIGH CUT filter what goes into the room, as studios did to keep their chambers from booming or hissing.

  • Pre-delay 0–250 ms
  • Low cut 20 Hz – 1 kHz
  • High cut 1–20 kHz
The RETURN controls: width, mix and output.

From mono to wider than the mics

WIDTH goes from mono to wider than the two microphones, MIX blends dry and chamber at equal power (100 % on an aux return), and OUTPUT trims the result. There’s no latency, and at MIX 0 % the output is the input, bit for bit.

  • Zero latency
  • Bit-exact at MIX 0 %
  • Mono in, stereo out
The DECAY display: reverb time per octave in seconds, and the last six seconds of the input and the chamber’s return in dBFS.

See how the room decays

The reverb time per octave from 63 Hz to 16 kHz, in seconds, at the current size and decay, beside the last six seconds of what goes in and what the chamber gives back.

  • RT60 per octave
  • Input against return
Input and output meters in dBFS with short-term and integrated loudness and the difference in LU.

Hear it at the same loudness

IN and OUT meters in dBFS with short-term and integrated loudness in LUFS and the difference in LU, so a reverb never wins just by being louder.

  • ITU-R BS.1770-4 / EBU R128
  • OUT − IN in LU
The preset browser with previous, next and Save.

73 presets, measured

Thirteen folders, from drums and vocals to mastering, plus Classic Chambers (one send preset per room) and Creative FX. Track presets stay within 0.3 dB of the dry level, and every reverb time sits in its stated window.

  • 13 folders
  • Save your own
  • Recalled with your session

Get VEIRA Chambers

Pay once and it’s yours, with every future update included.

VEIRA Chambers

An echo-chamber reverb you can watch: ten real rooms, ten materials.

  • Yours to keep: pay once, no subscription
  • Every future update, free for life
  • VST3, AU, Standalone on up to 3 computers
  • Changed your mind? Cancel within 14 days (refunds)
USD

One-time payment, in your cart.

Welcome offer

Get 10% off your first order

Leave your email and we’ll send you a code for 10% off your first order, on any plugins. One code per person.

Specifications

Type
Echo-chamber reverb: a speaker and two microphones in a modelled room, with harmonic saturation on the reverb
Chambers
Glass, bubinga, oak, cedar, granite, sandstone, marble, concrete, brick, plaster
Reverb time (mid)
0.85 s (cedar) to 6.4 s (marble) at default size and decay
Size
50 to 200 %
Decay
25 to 400 % of the chamber’s own reverb time
Mic
0 to 100 % (near the speaker to the far end)
Diffusion
0 to 100 %, up to six fabric totems (TOTEMS switches them out)
Send
Pre-delay 0–250 ms; low cut 20 Hz – 1 kHz; high cut 1–20 kHz or open (12 dB/oct)
Return
Width 0–150 %; mix (equal power); output −24 to +12 dB
Saturation
0 to 100 %: exact 2nd, 3rd or 2nd + 3rd harmonics on the reverb only
Latency
Zero
Metering
IN and OUT peak and RMS; short-term and integrated LUFS (BS.1770-4); harmonics meter
Presets
73 factory presets in 13 folders, plus your own
Channels
Mono, stereo, or mono in / stereo out
Formats
VST3, AU, Standalone
macOS
macOS 11 or later, Apple silicon or Intel (universal). VST3, AU and Standalone.
Windows
Windows 10 or later, 64-bit. VST3 and Standalone.
Pro Tools
Pro Tools (AAX) versions are built and tested, and arrive once they’re signed for Pro Tools.
Latest version
0.3.1, released October 31, 2026 · What’s new

Read more on the blog: The echo chamber sound: a classic reverb for vocals and snare · Reverb in a mix: building the space with sends, pre-delay and decay

Questions? 9 answers about VEIRA Chambers

Works well with

VEIRA EQ

A dynamic equaliser with up to 24 bands and an analyzer you can read.

$149.99

VEIRA Comp

A tube-coloured compressor you can read like an instrument.

$149.99

VEIRA Space

An algorithmic reverb that takes the ringing out and leaves the space.

$149.99