VEIRA Gate Blue
What does VEIRA Gate Blue do?
It is a channel gate / expander in the style of a 1970s British console, the vintage one of the four VEIRA colour gates, painted 1970s steel blue. THRESHOLD, RANGE up to 40 dB, HOLD and RELEASE, the console’s FAST ATTACK switch and GATE / EXPAND; the channel’s HPF and LPF, which FILTERS TO S/C turns into a key filter; and COLOUR, the gentle harmonics of the channel electronics. Its gain snaps open along a curve in decibels and closes in a straight line, with no lookahead, so drums keep the console’s attack.
Which of the four colour gates should I choose?
All four turn down what you don’t want between the notes and show it on a scrolling waveform; what differs is how they listen and how they move. White is clean: a precise gate with HYSTERESIS, LOOKAHEAD to 10 ms, key filters, an external key and FLIP ducking, for anything you want gated exactly. Red is punchy: a drum gate with a band-pass KEY that ignores cymbal bleed, SNAP and TIGHTEN. Gold is smooth: a downward expander with RATIO, KNEE, AUTO release and BREATH, for vocals, dialogue and acoustic instruments. Blue is vintage: a 1970s British console channel gate / expander with FAST ATTACK, GATE / EXPAND, the channel filters and COLOUR.
What does FAST ATTACK do, and why is there no attack knob?
Like the console, Gate Blue opens in one of two times: 1.5 ms normally, or 0.1 ms with FAST ATTACK (to within 1 dB of open). Its gain cell opens along a curve in decibels, so most of the move happens at the end: a third of the way into the normal attack the level is still 11.7 dB down, then the last 10 dB snap open. The normal attack takes about 1.8 dB off a drum’s first 5 ms, the console’s softer crack; FAST ATTACK keeps it within 0.2 dB. On low sustained notes FAST ATTACK’s snap is audible, by design.
What does FILTERS TO S/C do?
It decides where the channel’s HPF and LPF act. On (the default, the console’s link), they only shape what the gate hears and the audio passes unfiltered: HPF at 150 Hz makes a snare mic’s gate ignore the kick, LPF at 3 to 4 kHz makes a kick mic’s gate ignore the hats. Off, they filter the channel like an ordinary high- and low-pass, and the gate hears the filtered channel. Switching crossfades over 10 ms, so it never clicks.
When should I use EXPAND instead of GATE?
GATE switches between open and RANGE down: clean and decisive for drums, guitars and noise. EXPAND leans the level down 1:2 under the threshold with a 2 dB knee, until it reaches RANGE, so soft note and word endings are only nudged and there is no switching to hear: better for vocals, dialogue, acoustic instruments and ghost notes. On hum- or rumble-heavy material EXPAND can ride the noise floor by a dB or two, as a fast-opening console expander does; raise HPF with FILTERS TO S/C on, lengthen RELEASE, or use GATE with a smaller RANGE.
Does it add latency?
98 samples at every sample rate (2.0 ms at 48 kHz): COLOUR’s oversampling filters. The gate itself has no lookahead, as on the console. The latency is the same whatever the settings, COLOUR 0 included, and reported to your DAW, which compensates automatically; the host’s bypass is delayed by the same amount, so bypassing keeps the track in time.
What presets does it come with?
37 factory presets in 9 folders: Default, Vocals, Dialogue & Podcast, Acoustic, Drums (8), Guitars, Bass, Noise & Hum and Creative, from Kick Gate and Snare Gate Fast to Broadcast Gate, 80s Gated Snare and Console Colour Only. Each was run through the plugin on matching material with its parts kept apart, and each preset’s tooltip carries its measured result. Set THRESHOLD first so the dashed lines sit just over the bleed. You can save your own with SAVE in the preset bar.