VEIRA Tuner
What does VEIRA Tuner do?
It tunes guitar, 4- and 5-string bass and ukulele, and any other instrument in its chromatic mode. Put it on the instrument’s track (or its input), pick the INSTRUMENT and its TUNING, and play a string. A big needle shows how far you are from the note, from −50 to +50 cents, and turns green within 2 cents; a strobe under it drifts left when the string is flat and right when it is sharp, and stands still when it is in tune. Beside them you read the note and its octave, the string, the frequency you play and the target’s frequency in Hz.
Is VEIRA Tuner really free?
Yes. On its page, click Get it free: with a VEIRA account and a confirmed email address it goes straight into your account, without a payment or a card. Then VEIRA Manager installs it on up to 3 computers and keeps it up to date, like every VEIRA plugin, and it’s yours to keep. If you have paid plugins in your cart too, VEIRA Tuner is added to your account on its own and the payment covers only the others.
Which instruments and tunings does it have?
Guitar: Standard, Drop D, Half Step Down, Full Step Down, Drop C, DADGAD, Open G, Open D and Open E. Bass (4 strings): Standard, Drop D and Half Step Down. Bass (5 strings): Standard, Drop A and Half Step Down. Ukulele: Standard (G C E A with the high G), Low G and Baritone (D G B E). Each instrument keeps its own tuning when you switch between them. For anything else, choose Chromatic: the target is then the nearest note, from A0 (27.5 Hz) to F#6 (about 1.5 kHz).
How does it know which string I’m playing?
With AUTO, lit by default, the target is the string of the tuning nearest to the note you play, and the string row lights it. It stays on that string until another one is 30 cents closer, so it doesn’t jump between strings while you turn the peg. When a string is far out of tune, nearer to the next string than to its own, click that string in the row: the tuner locks to it. Click it again, or AUTO, to go back.
Should I watch the needle or the strobe?
Both show the same reading. The needle is for getting close quickly: it covers −50 to +50 cents and turns green within 2 cents. The strobe is for the last bit: it drifts left when the string is flat and right when it is sharp, slower and slower as you get closer, and stands still when the string is in tune. Its three rows move at 3, 12 and 48 pixels a second per cent, so even at 0.1 cent the finest row still creeps by 5 pixels a second.
What is REFERENCE A4, and when should I change it?
It is the pitch everything is tuned against: the note A4, 440.0 Hz by default, adjustable from 415.0 to 466.0 Hz in 0.1 Hz steps. Leave it at 440 Hz unless you play with others tuned elsewhere: 442 or 443 Hz to play with many orchestras, 415 Hz for baroque pitch, 432 Hz if your band tunes there. Right-click the knob (Control-click on a Mac) to type a value, and double-click it for 440 Hz. The Chromatic presets include 440, 442, 443, 415 and 432 Hz.
Does it change my sound or add latency?
No. With MUTE off, the output is the input, bit for bit, at any block size, and there is no latency, so it can stay on the track. Bypassed, the sound passes through too and the tuner keeps reading. The IN and OUT meters show the level going in and coming out.
What does MUTE do?
MUTE silences the output while you tune, for the stage: it fades the output to silence in 10 ms, and back when you switch it off, without a click. It lights orange and the display says OUTPUT MUTED; the tuner keeps reading while it is muted. It is off by default, and no factory preset turns it on.
Why does it keep saying “Play a string”?
It shows a reading only when it hears a clear note. First check the IN meter: if it doesn’t move, no signal reaches the plugin, so record-arm the track or turn on input monitoring, and check the track’s input is the one your instrument is plugged into. If IN moves but stays under about −60 dBFS, turn up the instrument or the interface’s input gain. Check INSTRUMENT, since each setting listens to its own range: a bass with Guitar or Ukulele selected has low strings outside it. And play one open string at a time, because a strummed chord has no single pitch. When a string stops, the display holds the last reading for 1.2 s (HELD), then asks you to play again.
How fast does it read a string, and what about low bass strings?
A plucked guitar or ukulele string reads within 1 cent 0.13 s after the pluck, a bass string within 0.20 s, the low B and A of a 5-string bass included. The noisy, slightly sharp start of a pluck is left out of the reading. A bass string whose fundamental is weaker than its 2nd harmonic is still read at the right octave, and once a note is held the tuner follows it without jumping octaves while it rings.
What presets does it come with?
25 factory presets in 5 folders: Default (Init: guitar, Standard, 440 Hz), Guitar (every guitar tuning), Bass (the 4- and 5-string tunings), Ukulele (the three tunings, and Standard at 442 Hz) and Chromatic (440, 442 and 443 Hz, 415 Hz baroque and 432 Hz). Each sets the instrument, the tuning and the reference. Each was checked through the real processor: a string plucked 5 cents flat reads on its own string, 5 cents flat. You can save your own with SAVE.