VEIRA Motion Filter
What does VEIRA Motion Filter do?
It is a filter that changes with the music. On every step of the song (every beat with RATE at 1/4) it picks a new shape, LOW PASS, HIGH PASS, BAND PASS, NOTCH or PEAK, a new cutoff and a new resonance, and glides there. RATE sets how long a step lasts, SHAPES which shapes the steps choose from, LOW and HIGH the range the cutoffs come from, CHAOS how far they wander, RESONANCE how sharp the filter is and GLIDE how smoothly it moves. PATTERN and NEW choose the pattern, REPEAT loops it, AUTO LEVEL keeps the level, and MIX and OUTPUT finish it. The 38 factory presets, for drums, bass, guitar, keys, vocals and the mix bus, plus Rhythmic, Sweeps and Creative FX, are good starting points.
Will it sound the same every time I press play?
Yes. Each step is worked out from the song’s position, not from when you pressed play: step 12 of the song always gets the same filter. So every playback and every bounce is the same, a looped section loops with the same filters, and starting playback in the middle of the song gives the step that belongs there. Tempo changes are followed at once. When the transport is stopped, the steps keep running at the song’s tempo so you can hear the effect while you tweak, and in the standalone app, with no song, they run at 120 BPM.
What are PATTERN, NEW and REPEAT?
PATTERN is the number the steps are drawn from, 1 to 999: each number is a different pattern with the same shapes, range and CHAOS. NEW picks another at random; keep clicking until a pattern grooves with the part. The number is saved with your session and in presets, so a pattern you like comes back exactly (in your DAW’s automation list it is called Pattern). REPEAT loops the pattern every 1, 2 or 4 bars of your song’s time signature, so it becomes a riff; Off gives every step of the song its own setting. The loop always starts again on the bar: with a dotted RATE, which doesn’t divide a bar of 4/4 evenly, the loop’s last step is shorter (at 1/8D, 1 BAR is five steps and a third of one).
Why doesn’t the level jump when the filter closes?
That’s AUTO LEVEL. A band pass at 660 Hz takes about 21 dB off a drum kit, so without help a moving filter is mostly a moving volume. AUTO LEVEL follows your track’s tone and gives every filter setting the gain that keeps it as loud as it came in, within 24 dB. The gain moves with the filter, not with the signal, so it doesn’t pump, and a peak guard keeps it from pushing peaks more than 3 dB over the input’s own (a high or band pass on a bass comes out a little quieter because of it). Single hits can still come out louder or quieter, depending on what the step keeps: that’s the rhythm of a moving filter. Switch AUTO LEVEL off to let the level move with the filter.
What do CHAOS and GLIDE do?
CHAOS sets how far each step’s cutoff may land from the middle of the LOW to HIGH range: at 0 % every step sits in the middle and only the shape changes; at 50 %, the middle half of the range; at 100 %, anywhere from LOW to HIGH, and the resonance varies more from step to step. GLIDE sets how much of each step the filter takes to reach the next setting: at 0 % it jumps (in 3 ms, so nothing clicks), at 30 % it slides into each step and holds, at 100 % it never stops moving. The shape glides too, so a change from a low pass to a band pass is a smooth morph.
Which note values can RATE use?
From shortest to longest: 1/32, 1/16T, 1/16, 1/8T, 1/8, 1/4T, 1/8D, 1/4, 1/4D, 1/2 and 1/1, at your song’s tempo: at 120 BPM a 1/4 step lasts 500 ms, a 1/16 step 125 ms and a 1/1 step a whole bar of 4/4. T values are triplets, D values dotted. Slow rates give sweeps that follow the phrase, the beat and the eighth the classic rhythmic filter, and sixteenths and faster a chopped, busy rhythm of their own. The MOTION display shows the step and the tempo the plugin receives, for example STEP 1/4 · 120 BPM.
Does it add latency?
No. VEIRA Motion Filter adds no delay at all, so you can play or sing through it live and use it anywhere in a session. MIX blends the filtered sound with the dry signal exactly, with no phasing of its own, and at MIX 0 % with OUTPUT at 0.0 dB the output is the input, bit for bit. It works on mono and stereo tracks, with the same filter on both sides.