VEIRA FM Six

What is VEIRA FM Six?

A six-operator FM synthesizer with the sound of classic 80s digital FM: tine pianos, bells, basses, brass, plucks, organs and pads. Six sine operators bend each other’s phase in one of 32 algorithms, with the 0 to 99 values FM programmers know. It is written from the published mathematics of FM, under VEIRA’s own name and face. Put it on an instrument track: it takes MIDI and has no audio input.

I’ve never programmed FM. Where do I start?

Start on the PLAY page: load a preset close to what you want and shape it with BRIGHTNESS, ATTACK, DECAY, RELEASE, DETUNE and WIDTH, then CHORUS, DELAY and SPACE. They act on top of the preset, so setting them back to 0 % gives you the preset as it was. To learn FM itself, load Templates ▸ Two Operator Start, go to the EDIT page, choose operator 2 and move its LEVEL: that modulator’s level is the brightness. The manual’s chapter Programming a sound goes on from there.

What is the difference between MODERN and VINTAGE?

MODERN is clean: the voices are computed at twice the sample rate at 44.1 and 48 kHz and filtered down, and a guard keeps modulators from folding back into the audible range. VINTAGE uses the era’s method: coarse log tables, envelopes that move in steps, no oversampling (so the era’s aliasing is there) and a converter whose grain GRIT sets. They play at the same level within 0.31 dB and line up to the sample, so you can switch while you listen.

What do carriers and modulators do?

A carrier is heard; a modulator isn’t heard itself, it bends the phase of the operator under it and makes it brighter. In the algorithm drawings carriers are the amber blocks along the bottom and modulators the blue blocks above them. So turning up a modulator’s LEVEL makes the sound brighter, not louder; turn up a carrier for loudness. Each operator’s envelope makes its effect move as the note plays.

Can I load banks from other FM instruments?

No. VEIRA FM Six uses the familiar 0 to 99 values, so you can program a sound you know by ear, but it has its own preset format and does not import other instruments’ banks. Its 73 factory presets were all designed for it, and your own are saved as .veirapreset files.

Does it add latency?

At 44.1 and 48 kHz, 31 samples: MODERN computes the voices at twice the rate and filters them back down, and VINTAGE is delayed by the same amount so switching never shifts the timing. At 88.2 kHz and above there is none. VEIRA FM Six reports it to your DAW, which compensates.

Which MIDI messages does it respond to?

Notes and velocity, pitch bend (up to 12 semitones, set by BEND), channel aftertouch, the mod wheel (CC 1), the sustain pedal (CC 64), and all sound off and all notes off (CC 120 and 123). The mod wheel and aftertouch can add vibrato, tremolo or EG bias, set under MOD WHEEL TO and AFTERTOUCH TO on the EDIT page. C3 is middle C on its keyboard. All 177 parameters can be automated.

Can it clip?

No. A soft limit after VOLUME is exactly linear up to −3 dBFS and bends above it, so the output can never reach 0 dBFS. All 32 algorithms at full level with feedback 7 stay under full scale at every sample rate. The factory presets are levelled with their peaks under −6 dBFS, so the soft limit is never reached in normal playing.

What presets does it come with?

73 original factory presets in eleven folders: Default, Keys, Bells & Mallets, Bass, Brass & Stabs, Pads & Strings, Plucks & Guitars, Organs, Leads, Effects and Templates, from Soft Tines, Glass Bell and Solid Bass to Brass Stab, Glass Pad, Drawbar Organ and Laser Fall. Each was levelled on the same phrase, every one within 3.9 LU of the median; the four Templates are places to start a sound from nothing.