VEIRA System 1

A patchable modular synthesizer in a walnut cabinet: three rows of modules in the spirit of the 1970s modular systems, big knobs, and cables you drag from jack to jack. True polyphony, with every voice the whole patch.

$199.99, a one-time purchase with free updates

VEIRA System 1, a walnut cabinet with three rows of black modules full of coloured cables: the oscillators, noise, LFOs, slew and mults on top, the mixer, ring modulator, folder, filters, VCAs and attenuverters in the middle, and the envelopes, the eight-step sequencer, the output and the voice lamps at the bottom.

VEIRA System 1 is a patchable modular synthesizer, an original design in the spirit of the 1970s modular systems: three rows of black modules with cream silkscreen and big knobs in a walnut cabinet. Three VCOs with audio-rate FM and hard sync, noise, two LFOs, slew and mults make the sounds and the movement; a mixer, a ring modulator, a wavefolder, a 24 dB ladder that sings when it resonates, a state-variable filter, two VCAs and attenuverters shape them; two envelopes, an eight-step sequencer that follows your DAW's tempo and an output with tape-style drive and a bucket-brigade delay finish them.

You patch it by dragging cables from jack to jack, and with no cables at all the normals already play a complete voice, so you can start from a sound and change one connection at a time. Every voice of a chord is the whole patch, up to eight, and the 46 factory patches in nine folders, from Acid Ladder and Analog Strings to Berlin Steps and Chaos Loop, each come with a note on what to try. Where VEIRA Black Synth is a modern wavetable synthesizer with a drag-and-drop matrix, System 1 is the one you wire by hand. Buy it once and VEIRA Manager installs it, like every plugin from VEIRA.

A tour of VEIRA System 1

VEIRA System 1, a walnut cabinet with three rows of black modules full of coloured cables: the oscillators, noise, LFOs, slew and mults on top, the mixer, ring modulator, folder, filters, VCAs and attenuverters in the middle, and the envelopes, the eight-step sequencer, the output and the voice lamps at the bottom.
  1. The whole of VEIRA System 1

    VEIRA System 1 is a patchable modular synthesizer, an original design in the spirit of the 1970s modular systems: three rows of black modules with cream silkscreen in a walnut cabinet. Three VCOs, noise, two LFOs, slew and mults on top; a mixer, ring modulator, wavefolder, a 24 dB ladder, a state-variable filter, two VCAs and attenuverters in the middle; two envelopes, an eight-step sequencer and the output with a bucket-brigade delay at the bottom. Drag a cable from an output to an input and the sound changes; with no cables at all, the normals already make it play.

  2. Row 1: the sources

    Three VCOs, noise, two LFOs, slew, mults and the MIDI module.

  3. Row 2: the shapers

    Mixer, ring, folder, the ladder and the state-variable filter, VCAs and attenuverters.

  4. Envelopes and sequencer

    Two ADSR envelopes and eight steps that follow your DAW’s tempo.

  5. Output and voices

    Drive, spread, a bucket-brigade delay, drift, and up to eight voices.

What VEIRA System 1 does for you

The MIXER, RING, FOLDER and VCF close up, patched: the ring modulator’s output in the mixer’s IN 3, the folder’s output in the VCF’s IN, and cables in the VCF’s FREQ and RES inputs, with CUTOFF at 900 Hz and RESONANCE at 70 %.

Patch it with cables

Drag from an output, a cream box, to an input, a black jack, and the cable is the connection. One output can feed any number of inputs; an input takes one cable, and a new one replaces it. Click a plug to pull it out, or drag it to another input. Cables droop with their length and take seven colours in turn. Every input takes audio as well as control signals, at audio rate, and feedback loops are allowed.

  • Drag from jack to jack
  • Audio rate everywhere
  • Feedback allowed
Row 1: MIDI, VCO 1, VCO 2 and VCO 3 with their OCTAVE, TUNE, WIDTH, FM and PWM knobs and SAW, SQR, TRI and SIN outputs, then NOISE, LFO 1, LFO 2, SLEW and two MULTs, with cables plugged in.

Three VCOs and everything that moves them

Each VCO has saw, square, triangle and sine outputs, OCTAVE, TUNE (±7 semitones) and WIDTH, and inputs for PITCH, FM at audio rate, PWM and hard SYNC. Beside them sit NOISE (white or pink), LFO 1 (triangle, square) and LFO 2 (triangle, sample and hold) from 0.02 to 200 Hz, a SLEW with separate rise and fall, two MULTs, and a MIDI module with PITCH at 1 V/octave, GATE, VEL, MOD and AT. The oscillators run at 4x and are band-limited: a C7 saw aliases at −77 dB.

  • 3 VCOs, 4 waves each
  • Audio-rate FM and sync
  • C7 saw aliasing at −77 dB
Row 2: the MIXER, RING, FOLDER, the VCF (a 24 dB ladder at 900 Hz, RESONANCE 70 %), the SVF with its LP, BP and HP outputs, VCA 1, VCA 2 and three ATTENUVERTERS, with cables plugged in.

A ladder, a state-variable filter and a wavefolder

The VCF is a 24 dB ladder, low pass or high pass, running at 2x with a softly saturating input: above about 95 % RESONANCE it rings by itself, and at KEY 100 % it follows the keys, so you can play it as a sine. The SVF gives low pass, band pass and high pass at once. The FOLDER is an anti-aliased sine wavefolder with FOLD and SYMMETRY, RING multiplies A by B, and a four-input MIXER, two VCAs and three ATTENUVERTERS, which scale, invert or give an offset, complete the middle row.

  • Self-oscillating 24 dB ladder
  • LP, BP and HP at once
  • Anti-aliased folder
ENV 1 and ENV 2 with ATTACK, DECAY, SUSTAIN and RELEASE, and the eight-step SEQUENCER with its lamps, steps from 0 to +15 st, the RUN and SYNC switches, RATE, DIVISION at 1/16, LENGTH 8 and GATE, and its CLOCK, GATE and CV outputs.

Envelopes and an eight-step sequencer

ENV 1 and ENV 2 are ADSR envelopes from 0.5 ms to 10 s, each with its own GATE input. The SEQUENCER has eight steps of ±24 semitones with a lamp each, RUN, LENGTH and GATE, and runs in step with your DAW's tempo, from 1/4 to 1/32 with triplets, or free at its own RATE. Its CLOCK, GATE and CV outputs go anywhere, and held keys transpose the sequence.

  • 8 steps, ±24 semitones
  • Synced to your DAW
  • Keys transpose it
The OUTPUT: LEVEL at −6 dB, DRIVE, SPREAD, VOICES at Mono, the bucket-brigade delay’s TIME at 350 ms, REPEATS and MIX, DRIFT, the L and R inputs and the PEAK lamp; beside it the VOICES lamps, voice 1 lit.

True polyphony: every voice is the whole patch

VOICES picks Mono, with last-note priority and legato, or 2, 4, 6 or 8 voices, and each voice runs the whole patch, so every note of a chord has its own filter, folder, envelopes and feedback. Voice 1 always runs, like a powered-up modular, so drones and sequences play with no keys held. The OUTPUT adds tape-style DRIVE, SPREAD across the stereo field, a bucket-brigade delay with TIME, REPEATS and MIX, and DRIFT: a slow wander per oscillator and small fixed differences between voices, seeded so a session renders the same every time.

  • Mono or 2 to 8 voices
  • Bucket-brigade delay
  • Drift that renders the same
The preset browser showing Default: Init, with previous, next and SAVE.

It plays before you patch, and 46 patches to learn from

Every input has a normal, so the empty cabinet already plays: VCO 1's saw through the MIXER, the VCF and VCA 1 to the output, ENV 1 on the VCA, ENV 2 on the cutoff, MIDI on the oscillators and the envelopes. A cable replaces the normal it plugs into. The 46 factory patches in nine folders, from Init and First Cable to Acid Ladder, Analog Strings, Berlin Steps, Self-Osc Drone and Chaos Loop, are each a whole patch, knobs and cables, with a note, levelled to about −16 LUFS. Your own presets save their cables too.

  • Plays with no cables
  • 46 patches in 9 folders
  • Cables saved with presets

Get VEIRA System 1

Pay once and it’s yours, with every future update included.

VEIRA System 1

A patchable modular synthesizer in a walnut cabinet: three rows of modules in the spirit of the 1970s modular systems, big knobs, and cables you drag from jack to jack. True polyphony, with every voice the whole patch.

  • Yours to keep: pay once, no subscription
  • Every future update, free for life
  • VST3, AU, Standalone on up to 3 computers
  • Changed your mind? Cancel within 14 days (refunds)
USD

One-time payment, in your cart.

Welcome offer

Get 10% off your first order

Leave your email and we’ll send you a code for 10% off your first order, on any plugins. One code per person.

Specifications

Type
Patchable modular synthesizer (instrument), an original design in the spirit of the 1970s modular systems: MIDI in, stereo or mono out, no audio input
Row 1
MIDI (PITCH at 1 V/octave, GATE, VEL, MOD, AT); VCO 1 to 3 (saw, square, triangle, sine; OCTAVE, TUNE ±7 st, WIDTH; PITCH, FM, PWM and SYNC inputs); NOISE (white or pink); LFO 1 (triangle, square) and LFO 2 (triangle, sample and hold), 0.02 to 200 Hz; SLEW (RISE, FALL); two MULTs
Row 2
MIXER (four inputs); RING (A × B); FOLDER (FOLD, SYMMETRY, CV); VCF (24 dB ladder, low or high pass, self-oscillating above about 95 % RESONANCE, KEY tracking); SVF (LP, BP and HP outputs); VCA 1 and VCA 2; three ATTENUVERTERS
Row 3
ENV 1 and ENV 2 (ADSR, 0.5 ms to 10 s); SEQUENCER (8 steps of ±24 st, RUN, SYNC from 1/4 to 1/32 with triplets or a free RATE, LENGTH, GATE; CLOCK, GATE and CV outputs); OUTPUT (LEVEL, DRIVE, SPREAD, VOICES, bucket-brigade delay, DRIFT, PEAK lamp); a lamp per voice
Patching
Drag cables from outputs to inputs; one output to any number of inputs, one cable per input; normals so the empty cabinet plays; every input takes audio and control signals at audio rate; feedback loops allowed
Voices
Mono (last-note priority, legato) or 2, 4, 6 or 8 voices, each the whole patch (true polyphony); voice 1 always runs
Quality
Oscillators at 4x, band-limited (a C7 saw aliases at −77 dB); ladder at 2x with a soft-saturating input; anti-aliased folder; knobs smoothed every sample
Parameters
72 knobs and switches, all automatable; the cables are saved with the session and in presets
Latency
None
Presets
46 factory patches in 9 folders (Default, Bass, Leads, Pads, Keys, Percussion, Sequences, FX & Drones, Experimental), levelled to about −16 LUFS, plus your own
Face
A walnut cabinet with three rows of black modules, cream silkscreen, big knobs and coloured cables
Window
1480 x 1300 at 100 %, resizable from 50 to 150 %, opens at 70 %, saved with the session
CPU (measured)
About 20 % of one core for eight voices of a patch using every module (48 kHz); the normalled patch takes much less
Formats
VST3, AU, Standalone
macOS
macOS 11 or later, Apple silicon or Intel (universal). VST3, AU and Standalone.
Windows
Windows 10 or later, 64-bit. VST3 and Standalone.
Pro Tools
Pro Tools (AAX) versions are built and tested, and arrive once they’re signed for Pro Tools.
Latest version
0.2.0, released November 17, 2026 · What’s new

Read more on the blog: Patching a modular synthesizer, one cable at a time

Questions? 10 answers about VEIRA System 1

Works well with

VEIRA Black Synth

VEIRA’s first instrument: a modern wavetable synthesizer, all black. Two wavetable oscillators with unison and warp, sub, noise, an eight-type filter, three envelopes, four LFOs, a drag-and-drop modulation matrix and five effects.

$249.99

VEIRA Analog Delay

A bucket-brigade analog delay behind a vintage blue-grey panel: the longer the delay, the darker and grainier the repeats, each one a little darker than the last, and the pitch bends as you turn DELAY.

$149.99

VEIRA Mod Drive

A drive pedal into a modulation pedal in one vintage unit: grit that doesn’t get louder, then chorus, flanger, phaser, tremolo or vibrato, free or locked to the song.

$39.99