VEIRA Limiter White

The clean one of VEIRA’s four colour limiters: a true-peak mastering limiter built for transparency. Bass is never clipped, held notes are never shaved and the mix doesn’t pump.

$149.99, a one-time purchase with free updates

VEIRA Limiter White, painted pearl white, with +10 dB of GAIN on a dense premaster: the waveform with the output under the −1.0 dBTP ceiling and what was taken off in grey behind it, the REDUCTION lane with the clipper and the limiter, the LOUDNESS lane on the −6 LUFS TARGET, the IN and OUT meters, the REDUCTION meter at −9.2 dB and the LOUDNESS panel reading −6.2 LUFS integrated, and the LEVEL, SHAPE and LOUDNESS controls along the bottom.

VEIRA Limiter White is the clean one of VEIRA’s four colour limiters, a mastering limiter painted pearl white. Put it last on your master bus, turn GAIN up, and it keeps every peak under the CEILING in true peak, including the peaks that hide between the samples. Inside, a slow, clean stage looks ahead and decides how far each kind of sound may go over the ceiling: bass notes not at all, held chords and voices not at all, short drum transients a little. A transient clipper rounds those, and a fast stage takes the rest down to the ceiling.

The result reached −6 LUFS on a dense mix with the ceiling held at −1 dBTP and no overs, while bass stays unclipped and the mix doesn’t pump; on very sub-heavy mixes it can stop just short of −6, because it never clips held bass. The waveform shows what was taken off, the loudness panel reads integrated loudness against your TARGET, and MATCH lets you judge it at equal loudness. The 43 factory presets in 10 folders each aim at a loudness target. Buy it once and VEIRA Manager installs it, like every plugin from VEIRA.

A tour of VEIRA Limiter White

VEIRA Limiter White, painted pearl white, with +10 dB of GAIN on a dense premaster: the waveform with the output under the −1.0 dBTP ceiling and what was taken off in grey behind it, the REDUCTION lane with the clipper and the limiter, the LOUDNESS lane on the −6 LUFS TARGET, the IN and OUT meters, the REDUCTION meter at −9.2 dB and the LOUDNESS panel reading −6.2 LUFS integrated, and the LEVEL, SHAPE and LOUDNESS controls along the bottom.
  1. The whole of VEIRA Limiter White

    VEIRA Limiter White is a mastering limiter painted pearl white. Turn GAIN up and it keeps every peak under the CEILING, in true peak, while three stages share the work: a slow, clean stage that looks ahead and decides how far each kind of sound may go, a transient clipper for the first milliseconds of the hits, and a fast stage that takes the rest to the ceiling. The waveform shows what was taken off, the REDUCTION lane splits clipper and limiter, and the loudness panel reads where you stand against your TARGET.

  2. What it takes off

    The output in front, what was taken off in grey behind it, the ceiling you can drag, and the clipper’s and the limiter’s share of the reduction over time.

  3. Reduction and loudness

    The reduction now, with the movement of a VU meter, and the loudness against your TARGET: integrated, TO TARGET, short-term, momentary, the true-peak maximum and PLR.

  4. In and out

    Input peak and output true peak, with short-term and integrated loudness and how much louder the output is, in LU.

  5. Shape

    RELEASE with its two-stage AUTO, LOOKAHEAD and the stereo LINK.

  6. Gain and ceiling

    GAIN pushes the music into the limiter; CEILING sets the highest the output may go, in true peak.

What VEIRA Limiter White does for you

The display: the waveform with the output in front, what was taken off in grey and the ceiling line with its grip; the REDUCTION lane with the clipper in orange and the limiter in red; and the LOUDNESS lane with the short-term loudness on the −6.0 LUFS TARGET line.

Bass is never clipped

Below 200 Hz, the bass notes and the kick’s body, White always turns the level down instead of clipping. Bass sines driven 16 dB over the ceiling come out with 0.000 % distortion at 30, 40, 60 and 100 Hz, and a 60 Hz plus 7 kHz intermodulation test reads 0.0086 %. Only the first milliseconds of a drum transient are rounded by the clipper; the grey shadow on the waveform shows exactly what was taken off.

  • 0.000 % bass THD
  • Held notes never clipped
  • Clipper only on transients
The SHAPE group: RELEASE at 100 ms with AUTO on, LOOKAHEAD at 4.0 ms and LINK at 100 %.

Steady at loudness, no pumping

AUTO makes the release two-stage: short peaks recover in a third of RELEASE, while a slow stage settles on the sustained reduction, so dense passages stay steady instead of breathing with the kick. LOOKAHEAD (0.5 to 10 ms) sets how early the gain starts down before a peak and can be changed while playing; LINK sets how much the two sides are limited together; OVERSAMPLING runs the fast stage at 1X, 2X or 4X.

  • Two-stage AUTO release
  • Lookahead 0.5 to 10 ms
  • 1X, 2X or 4X
+22 dB of GAIN: the REDUCTION meter at −21.2 dB, yet integrated loudness still at −6.0 LUFS and PLR 5.0 dB. On this dense mix White has levelled off, and more GAIN only adds reduction.

−6 LUFS, and where it stops

On a dense premaster peaking at −3 dBFS, White reached −6.06 LUFS integrated with the true peak at −1.06 dBTP and no overs. At −6 LUFS any limiter shapes the peaks, and the grey shadow shows how much. Because White never clips held bass, a very sub-heavy mix can stop just short: our kick, bass and pads mix stopped at −6.8 LUFS. When more GAIN only adds reduction, back off; Red, Gold or Blue go further on such material.

  • −6.06 LUFS measured
  • −1.06 dBTP
  • Honest about its limits
The LEVEL group on the pearl-white paint: the GAIN knob at +10.0 dB and the CEILING knob at −1.0 dBTP, each with its ring printed in charcoal.

A true-peak ceiling with no overs

CEILING runs from −12 to 0 dBTP and holds in true peak, the peaks between the samples included, as streaming and broadcast delivery ask. Measured through the plugin on dense premasters and on every factory preset: no overs, read on a standard BS.1770 meter and on a finer 16x reconstruction. Drag the ceiling line on the waveform to set it, or double-click it for −1.0 dBTP.

  • −12 to 0 dBTP
  • No overs
  • BS.1770 true peak
The REDUCTION meter at −9.2 dB, and the LOUDNESS panel: TARGET −6.0 LUFS, −6.2 LUFS integrated, the short-term and integrated bars against the target line, TO TARGET −0.2 LU, MOMENTARY −6.6 LUFS, TRUE PEAK MAX −1.1 dBTP and PLR 5.2 dB.

Loudness against your target

Set a TARGET in LUFS and the loudness panel reads integrated loudness in large numerals, TO TARGET in LU, short-term and momentary loudness, the true-peak maximum and PLR. The loudness lane draws the short-term loudness over time against the TARGET line. TARGET changes nothing in the sound; click the panel to start a new measurement, for example at the top of the song.

  • Integrated LUFS
  • TO TARGET in LU
  • True-peak max and PLR
The LOUDNESS group: TARGET at −6.0 LUFS, the OVERSAMPLING buttons with 4X selected, and MATCH, reading MATCH OFF.

Judge it at equal loudness

Louder always sounds better, which makes a limiter impossible to judge by ear. MATCH plays the result at the input’s loudness, measured K-weighted over 3 seconds, so you hear what the limiting does to the sound rather than that it got louder. The meters still read the real output, and an offline bounce always leaves MATCH out.

  • Equal-loudness listening
  • K-weighted over 3 s
  • Left out of offline bounces
The controls along the bottom of the pearl-white face: GAIN and CEILING under LEVEL; RELEASE, AUTO, LOOKAHEAD and LINK under SHAPE; TARGET, OVERSAMPLING and MATCH under LOUDNESS.

Four colours, one layout

VEIRA’s four colour limiters are each painted their own colour: White in pearl, Red in deep lacquered red, Gold in brushed champagne and Blue in 1970s steel blue. They share one layout, the same loudness panel, TARGET and MATCH, so you can move between them and hear only the stage that gives each its character. The displays are dark screens set into the paint, and every label on the paint stands at least 4.5:1 against it.

  • White, Red, Gold, Blue
  • One layout
  • Text at 4.5:1 or more
The preset browser showing Default: Init, with previous, next and SAVE.

43 presets in 10 folders, each aimed at a target

Default, Mastering, Streaming, Pop, EDM, Hip-Hop, Rock, Acoustic, Mix Bus and Stems. Each preset names its loudness TARGET and was calibrated through the real plugin on matching material, in two rounds: no preset produces an over, on its own material and, for the mastering folders, on a dense mix too. On your music, set GAIN by the loudness panel, as each preset’s note says.

  • 10 folders
  • Zero overs across the bank
  • Save your own

Get VEIRA Limiter White

Pay once and it’s yours, with every future update included.

VEIRA Limiter White

The clean one of VEIRA’s four colour limiters: a true-peak mastering limiter built for transparency. Bass is never clipped, held notes are never shaved and the mix doesn’t pump.

  • Yours to keep: pay once, no subscription
  • Every future update, free for life
  • VST3, AU, Standalone on up to 3 computers
  • Changed your mind? Cancel within 14 days (refunds)
USD

One-time payment, in your cart.

Welcome offer

Get 10% off your first order

Leave your email and we’ll send you a code for 10% off your first order, on any plugins. One code per person.

Specifications

Type
Clean true-peak mastering limiter: a slow lookahead stage, a transient clipper at 8x and a fast stage share the work
Gain
0 to +30 dB (set by hand; no automatic loudness)
Ceiling
−12 to 0 dBTP, always in true peak (ITU-R BS.1770); drag the line on the waveform, double-click for −1.0 dBTP
Release
1 to 1000 ms; AUTO (on by default) makes it two-stage, so dense passages don’t pump
Lookahead, link
LOOKAHEAD 0.5 to 10 ms (changeable while playing; never changes the latency); LINK 0 to 100 %
Oversampling
1X, 2X or 4X for the fast stage (4X by default); the transient clipper always runs at 8x
Target
−16 to −4 LUFS; changes nothing in the sound
Listening
MATCH plays the result at the input’s loudness (K-weighted, 3 s); offline bounces always leave it out
Loudness (measured)
A dense premaster at −3 dBFS peak: −6.06 LUFS at −1.06 dBTP, no overs; a very sub-heavy mix stopped at −6.8 LUFS (White never clips held bass)
Latency
782 samples at 48 kHz (16.3 ms; 740 at 44.1 kHz), constant and reported to your DAW
Metering
Waveform with what was taken off; REDUCTION lane and meter; integrated, short-term and momentary LUFS; TO TARGET; true-peak max; PLR; IN and OUT peak and RMS
Presets
43 factory presets in 10 folders (Default, Mastering, Streaming, Pop, EDM, Hip-Hop, Rock, Acoustic, Mix Bus, Stems), plus your own
Channels
Mono or stereo
Face
Pearl white, with charcoal print and black knobs; dark screens set into the paint
Window
1360 x 900 at 100 %, resizable from 75 to 200 %, saved with the session
CPU (measured)
About 21 % of one core of a 2-core cloud machine (stereo, 48 kHz, 4X); 17 % at 1X
Formats
VST3, AU, Standalone
macOS
macOS 11 or later, Apple silicon or Intel (universal). VST3, AU and Standalone.
Windows
Windows 10 or later, 64-bit. VST3 and Standalone.
Pro Tools
Pro Tools (AAX) versions are built and tested, and arrive once they’re signed for Pro Tools.
Latest version
0.1.0, released November 1, 2026 · What’s new

Read more on the blog: Four colours of limiter: clean, punchy, warm and vintage at −6 LUFS · Checking a mix and handing it off to mastering

Questions? 8 answers about VEIRA Limiter White

Works well with

VEIRA Limiter Red

The punchy one of VEIRA’s four colour limiters: a punch clipper before a true-peak limiter, so the drums keep hitting at loudness and the groove doesn’t duck.

$149.99

VEIRA Limiter Gold

The warm one of VEIRA’s four colour limiters: an oversampled tape or tube stage rounds the peaks with smooth, low-order harmonics before a clean true-peak brickwall.

$149.99

VEIRA Limiter Blue

The vintage one of VEIRA’s four colour limiters: an OPTO or FET levelling stage and transformer colour, like 1970s hardware, before a clean true-peak brickwall.

$149.99