VEIRA Limiter Red

The punchy one of VEIRA’s four colour limiters: a punch clipper before a true-peak limiter, so the drums keep hitting at loudness and the groove doesn’t duck.

$149.99, a one-time purchase with free updates

VEIRA Limiter Red, painted deep lacquered red, with +10 dB of GAIN and PUNCH at 50 % on a dense premaster: the waveform with the output under the −1.0 dBTP ceiling and the hits that were clipped and limited in grey, the REDUCTION lane with the punch clipper and the limiter, the LOUDNESS lane on the −6 LUFS TARGET, the IN and OUT meters, the REDUCTION meter at −10.9 dB and the LOUDNESS panel reading −5.9 LUFS integrated, and the LEVEL, PUNCH and LOUDNESS controls along the bottom.

VEIRA Limiter Red is the punchy one of VEIRA’s four colour limiters, a mastering limiter painted deep lacquered red. Loud masters lose their punch because a limiter turns the whole mix down on every kick and snare, so the music between the hits ducks. Red clips the first milliseconds of each hit instead, with an 8x oversampled soft clipper that only touches what jumps out of the music, and behind it the engine of VEIRA Limiter White holds the true-peak ceiling. PUNCH sets how the work is shared, from all limiter at 0 % to hard-clipped hits at 100 %.

Held bass notes, chords and voices always ride under the clipper, so they are never clipped. On a dense mix Red reached −6 LUFS with less GAIN than a limiter alone, with the ceiling held at −1 dBTP and no overs; on very sub-heavy mixes it can stop just short of −6. The REDUCTION lane splits punch and limiter, the loudness panel reads integrated loudness against your TARGET, and MATCH lets you judge it at equal loudness. The 41 factory presets in 10 folders each aim at a loudness target. Buy it once and VEIRA Manager installs it, like every plugin from VEIRA.

A tour of VEIRA Limiter Red

VEIRA Limiter Red, painted deep lacquered red, with +10 dB of GAIN and PUNCH at 50 % on a dense premaster: the waveform with the output under the −1.0 dBTP ceiling and the hits that were clipped and limited in grey, the REDUCTION lane with the punch clipper and the limiter, the LOUDNESS lane on the −6 LUFS TARGET, the IN and OUT meters, the REDUCTION meter at −10.9 dB and the LOUDNESS panel reading −5.9 LUFS integrated, and the LEVEL, PUNCH and LOUDNESS controls along the bottom.
  1. The whole of VEIRA Limiter Red

    VEIRA Limiter Red is a mastering limiter painted deep lacquered red. Loud masters lose their punch because the limiter turns the whole mix down on every kick and snare; Red clips the first milliseconds of each hit instead, with an oversampled soft clipper that only touches what jumps out of the music, and behind it the engine of VEIRA Limiter White holds the true-peak ceiling. PUNCH sets how the work is shared. The REDUCTION lane splits punch and limiter, and the loudness panel reads where you stand against your TARGET.

  2. Punch and limiter

    The output in front, the hits that were taken off in grey, the ceiling you can drag, and the punch clipper’s and the limiter’s share of the reduction over time.

  3. Reduction and loudness

    The reduction now, with the movement of a VU meter, and the loudness against your TARGET: integrated, TO TARGET, short-term, momentary, the true-peak maximum and PLR.

  4. In and out

    Input peak and output true peak, with short-term and integrated loudness and how much louder the output is, in LU.

  5. Punch

    PUNCH shares the work between the clipper and the limiter; RELEASE and AUTO set how quickly the limiter lets go after each hit.

  6. Gain and ceiling

    GAIN pushes the music into the limiter; CEILING sets the highest the output may go, in true peak.

What VEIRA Limiter Red does for you

The display: the waveform with the output in front, the clipped and limited hits in grey and the ceiling line with its grip; the REDUCTION lane with the punch clipper in orange and the limiter in red; and the LOUDNESS lane with the short-term loudness on the −6.0 LUFS TARGET line.

The groove doesn’t duck

A limiter alone turns everything down on each hit, so the music between the hits dips and swells. Red’s punch clipper rounds the tips of the hits instead, at 8x oversampling, and the limiter behind has less to do: on a dense mix the limiter’s swing within each beat falls from 6.1 dB at PUNCH 0 % to 4.3 dB at 100 %, at the same GAIN.

  • 8x oversampled clipper
  • 6.1 to 4.3 dB swing
  • Hits keep their attack
The PUNCH group: the large PUNCH knob at 50 %, RELEASE at 60 ms and AUTO on, filled in cream.

PUNCH: one knob for how hard the hits are clipped

At 0 % the clipper is out and Red is all limiter; more PUNCH clips the hits’ first milliseconds instead of ducking the mix. Its threshold follows the music’s sustained level, so held bass notes, chords and voices always ride under it: bass sines come out with 0.000 % distortion at the default 50 %. On the same mix, PUNCH 100 % reaches the same loudness with about 1 dB less GAIN. RELEASE and AUTO set how quickly the limiter lets go after each hit.

  • 0 to 100 %
  • Held notes ride under it
  • Transient-preserving AUTO
PUNCH at 100 % with the same +9 dB: the hits are clipped, the limiter’s band is thinner, and integrated loudness reads −5.7 LUFS, with TRUE PEAK MAX still at −1.1 dBTP.

−6 LUFS with less gain, and where it stops

On a dense premaster peaking at −3 dBFS, Red reached −6.00 LUFS at +9.1 dB of GAIN, with the true peak at −1.07 dBTP and no overs. At −6 LUFS any limiter shapes the peaks; Red shapes the hits rather than the groove. Because it never clips held bass, a very sub-heavy mix can stop just short: our kick, bass and pads mix stopped at −6.5 LUFS. When more GAIN only adds reduction, back off, or try Gold or Blue on that material.

  • −6.00 LUFS at +9.1 dB
  • −1.07 dBTP
  • Honest about its limits
The LEVEL group on the lacquered-red paint: the GAIN knob at +10.0 dB and the CEILING knob at −1.0 dBTP, each with its ring printed in cream.

A true-peak ceiling with no overs

CEILING runs from −12 to 0 dBTP and holds in true peak, the peaks between the samples included, as streaming and broadcast delivery ask. Measured through the plugin on dense premasters and on every factory preset: no overs, read on a standard BS.1770 meter and on a finer 16x reconstruction. Drag the ceiling line on the waveform to set it, or double-click it for −1.0 dBTP.

  • −12 to 0 dBTP
  • No overs
  • BS.1770 true peak
The REDUCTION meter at −10.9 dB, and the LOUDNESS panel: TARGET −6.0 LUFS, −5.9 LUFS integrated, the short-term and integrated bars against the target line, TO TARGET +0.1 LU, MOMENTARY −6.3 LUFS, TRUE PEAK MAX −1.1 dBTP and PLR 4.8 dB.

Loudness against your target

Set a TARGET in LUFS and the loudness panel reads integrated loudness in large numerals, TO TARGET in LU, short-term and momentary loudness, the true-peak maximum and PLR. The loudness lane draws the short-term loudness over time against the TARGET line. TARGET changes nothing in the sound; click the panel to start a new measurement, for example at the top of the song.

  • Integrated LUFS
  • TO TARGET in LU
  • True-peak max and PLR
The LOUDNESS group: TARGET at −6.0 LUFS and MATCH, reading MATCH OFF.

Judge it at equal loudness

Louder always sounds better, which makes a limiter impossible to judge by ear. MATCH plays the result at the input’s loudness, measured K-weighted over 3 seconds, so you hear what the limiting does to the sound rather than that it got louder. The meters still read the real output, and an offline bounce always leaves MATCH out.

  • Equal-loudness listening
  • K-weighted over 3 s
  • Left out of offline bounces
The controls along the bottom of the red face: GAIN and CEILING under LEVEL; PUNCH, RELEASE and AUTO under PUNCH; TARGET and MATCH under LOUDNESS.

Four colours, one layout

VEIRA’s four colour limiters are each painted their own colour: White in pearl, Red in deep lacquered red, Gold in brushed champagne and Blue in 1970s steel blue. They share one layout, the same loudness panel, TARGET and MATCH, so you can move between them and hear only the stage that gives each its character. The displays are dark screens set into the paint, and every label on the paint stands at least 4.5:1 against it.

  • White, Red, Gold, Blue
  • One layout
  • Text at 4.5:1 or more
The preset browser showing Default: Init, with previous, next and SAVE.

41 presets in 10 folders, each aimed at a target

Default, Mastering, Streaming, Pop, EDM, Hip-Hop, Rock, Acoustic, Mix Bus and Stems. Each preset names its loudness TARGET and its PUNCH, and was calibrated through the real plugin on matching material, in two rounds: no preset produces an over, on its own material and, for the mastering folders, on a dense mix too. On your music, set GAIN by the loudness panel, as each preset’s note says.

  • 10 folders
  • Zero overs across the bank
  • Save your own

Get VEIRA Limiter Red

Pay once and it’s yours, with every future update included.

VEIRA Limiter Red

The punchy one of VEIRA’s four colour limiters: a punch clipper before a true-peak limiter, so the drums keep hitting at loudness and the groove doesn’t duck.

  • Yours to keep: pay once, no subscription
  • Every future update, free for life
  • VST3, AU, Standalone on up to 3 computers
  • Changed your mind? Cancel within 14 days (refunds)
USD

One-time payment, in your cart.

Welcome offer

Get 10% off your first order

Leave your email and we’ll send you a code for 10% off your first order, on any plugins. One code per person.

Specifications

Type
Punchy true-peak mastering limiter: a punch clipper at 8x before the engine of VEIRA Limiter White
Gain
0 to +30 dB (set by hand; no automatic loudness)
Ceiling
−12 to 0 dBTP, always in true peak (ITU-R BS.1770); drag the line on the waveform, double-click for −1.0 dBTP
Punch
0 to 100 % (default 50 %): how much of the peak control the clipper does; held bass, chords and voices always ride under it
Release
1 to 1000 ms (default 60 ms); AUTO (on by default) recovers quickly after each hit and slowly through dense passages
Target
−16 to −4 LUFS; changes nothing in the sound
Listening
MATCH plays the result at the input’s loudness (K-weighted, 3 s); offline bounces always leave it out
Loudness (measured)
A dense premaster at −3 dBFS peak: −6.00 LUFS at +9.1 dB of GAIN (PUNCH 50 %), −1.07 dBTP, no overs; a very sub-heavy mix stopped at −6.5 LUFS
Latency
448 samples at 48 kHz (9.3 ms; 436 at 44.1 kHz), constant and reported to your DAW
Metering
Waveform with what was taken off; REDUCTION lane and meter; integrated, short-term and momentary LUFS; TO TARGET; true-peak max; PLR; IN and OUT peak and RMS
Presets
41 factory presets in 10 folders (Default, Mastering, Streaming, Pop, EDM, Hip-Hop, Rock, Acoustic, Mix Bus, Stems), plus your own
Channels
Mono or stereo
Face
Deep lacquered red, with cream print and black knobs; dark screens set into the paint
Window
1360 x 900 at 100 %, resizable from 75 to 200 %, saved with the session
CPU (measured)
About 29 % of one core of a 2-core cloud machine (stereo, 48 kHz)
Formats
VST3, AU, Standalone
macOS
macOS 11 or later, Apple silicon or Intel (universal). VST3, AU and Standalone.
Windows
Windows 10 or later, 64-bit. VST3 and Standalone.
Pro Tools
Pro Tools (AAX) versions are built and tested, and arrive once they’re signed for Pro Tools.
Latest version
0.1.0, released November 1, 2026 · What’s new

Read more on the blog: Four colours of limiter: clean, punchy, warm and vintage at −6 LUFS

Questions? 8 answers about VEIRA Limiter Red

Works well with

VEIRA Limiter White

The clean one of VEIRA’s four colour limiters: a true-peak mastering limiter built for transparency. Bass is never clipped, held notes are never shaved and the mix doesn’t pump.

$149.99

VEIRA Limiter Gold

The warm one of VEIRA’s four colour limiters: an oversampled tape or tube stage rounds the peaks with smooth, low-order harmonics before a clean true-peak brickwall.

$149.99

VEIRA Limiter Blue

The vintage one of VEIRA’s four colour limiters: an OPTO or FET levelling stage and transformer colour, like 1970s hardware, before a clean true-peak brickwall.

$149.99