VEIRA Limiter Blue

The vintage one of VEIRA’s four colour limiters: an OPTO or FET levelling stage and transformer colour, like 1970s hardware, before a clean true-peak brickwall.

$149.99, a one-time purchase with free updates

VEIRA Limiter Blue, painted 1970s steel blue, with +9.5 dB of GAIN, OPTO levelling and COLOUR at 40 % on a dense premaster: the waveform with the output under the −1.0 dBTP ceiling, the REDUCTION lane with the vintage levelling and the brickwall, the LOUDNESS lane on the −6 LUFS TARGET, the IN and OUT meters, the REDUCTION meter at −4.5 dB and the loudness panel reading −6.4 LUFS integrated, and the LEVEL, VINTAGE, LIMITER and LOUDNESS controls along the bottom.

VEIRA Limiter Blue is the vintage one of VEIRA’s four colour limiters, a mastering limiter painted 1970s steel blue. GAIN drives the music into a levelling stage like the hardware of that decade: OPTO, an optical amplifier with a gentle 3:1 and a recovery that holds longer the harder it has worked, or FET, a fast 4:1 peak limiter. COMPRESS, ATTACK and RECOVERY set how it moves, and it gives back its own average reduction, so it changes the density, not the loudness. COLOUR adds transformer iron to the lows, while the mids and highs pass clean.

A clean true-peak brickwall then holds the ceiling with no overs. On dense and gentler pop mixes Blue at its defaults landed about −5.8 LUFS with the ceiling at −1 dBTP, so back GAIN off a little to sit right on −6. The REDUCTION lane shows the vintage levelling over the brickwall’s, the loudness panel reads integrated loudness against your TARGET, and MATCH lets you judge it at equal loudness. The 40 factory presets in 10 folders each aim at a loudness target. Buy it once and VEIRA Manager installs it, like every plugin from VEIRA.

A tour of VEIRA Limiter Blue

VEIRA Limiter Blue, painted 1970s steel blue, with +9.5 dB of GAIN, OPTO levelling and COLOUR at 40 % on a dense premaster: the waveform with the output under the −1.0 dBTP ceiling, the REDUCTION lane with the vintage levelling and the brickwall, the LOUDNESS lane on the −6 LUFS TARGET, the IN and OUT meters, the REDUCTION meter at −4.5 dB and the loudness panel reading −6.4 LUFS integrated, and the LEVEL, VINTAGE, LIMITER and LOUDNESS controls along the bottom.
  1. The whole of VEIRA Limiter Blue

    VEIRA Limiter Blue is a mastering limiter painted 1970s steel blue. GAIN drives the music into a vintage levelling stage, optical or FET, that gives the slower, programme-dependent limiting of old hardware and gives back its own average reduction; a transformer adds gentle iron to the lows and an output stage rounds the fastest peaks. A clean true-peak brickwall then holds the ceiling. The REDUCTION lane shows the vintage levelling over the brickwall’s, and the loudness panel reads where you stand against your TARGET.

  2. Vintage and brickwall

    The output in front, the ceiling you can drag, and the vintage stage’s net levelling over the brickwall’s, over time.

  3. Reduction and loudness

    The reduction now, with the movement of a VU meter, and the loudness against your TARGET: integrated, TO TARGET, short-term, momentary, the true-peak maximum and PLR.

  4. In and out

    Input peak and output true peak, with short-term and integrated loudness and how much louder the output is, in LU.

  5. Vintage

    OPTO or FET levelling, how much (COMPRESS), how it moves (ATTACK, RECOVERY), and the transformer and output stage (COLOUR).

  6. Gain and ceiling

    GAIN pushes the music into the limiter; CEILING sets the highest the output may go, in true peak.

What VEIRA Limiter Blue does for you

OPTO selected, filled in cream, over FET, with COMPRESS at 50 % and ATTACK at 10 ms.

OPTO or FET, like 1970s hardware

OPTO is an optical levelling amplifier: RMS-like detection, a gentle 3:1 with a wide knee, and a recovery that holds half its reduction longer the harder it has worked. FET is a fast peak limiter: 4:1 with a firmer knee and a quick attack. COMPRESS sets how much the stage levels, ATTACK and RECOVERY how it moves, and the stage gives back its own average reduction, so COMPRESS changes the density, not the loudness.

  • Optical or FET
  • Programme-dependent recovery
  • Make-up built in
The VINTAGE group: OPTO selected over FET, COMPRESS at 50 %, ATTACK at 10 ms, RECOVERY at 300 ms and COLOUR at 40 %.

Iron on the lows, the mids left clean

COLOUR drives the transformer and the output stage. Only the lows pass through the iron, so bass and kick round off and gain a 3rd harmonic while the mids and highs never touch it: a 1 kHz tone at the body level measures under 0.0001 % distortion. The output stage rounds only the fastest peaks, and the top softens a little, −1 dB at 20 kHz at 100 %. With COMPRESS at 0 % the vintage controls dim: the stage is out.

  • Transformer on the lows
  • 1 kHz under 0.0001 %
  • COLOUR 0 to 100 %
A pop premaster at +9.5 dB of GAIN with FET, COMPRESS 60 %, ATTACK 0.8 ms, RECOVERY 150 ms, COLOUR 70 % and a −8.0 LUFS TARGET: integrated loudness reads −8.0 LUFS, TO TARGET 0.0 LU in green, TRUE PEAK MAX −1.0 dBTP, with the FET’s net levelling in violet over the brickwall in red.

Near −6 LUFS, honestly

On a dense EDM premaster peaking at −3 dBFS, Blue at its defaults reached −5.81 LUFS at +10.9 dB of GAIN, and −5.75 LUFS on a gentler pop mix, with the true peak at −1.05 dBTP and no overs. So on such mixes it lands about −5.8 LUFS, a touch past the −6 mark, and you can back GAIN off to sit right on your target. With COMPRESS and COLOUR at 0 % it is a plain limiter, which stops near −7.1 LUFS on that EDM mix.

  • About −5.8 LUFS
  • −1.05 dBTP
  • No overs
The LEVEL group on the steel-blue paint: the GAIN knob at +9.5 dB and the CEILING knob at −1.0 dBTP, each with its ring printed in cream.

A true-peak ceiling with no overs

CEILING runs from −12 to 0 dBTP and holds in true peak, the peaks between the samples included, as streaming and broadcast delivery ask. Measured through the plugin on dense premasters and on every factory preset: no overs, read on a standard BS.1770 meter and on a finer 16x reconstruction. Drag the ceiling line on the waveform to set it, or double-click it for −1.0 dBTP.

  • −12 to 0 dBTP
  • No overs
  • BS.1770 true peak
The REDUCTION meter at −4.5 dB, and the loudness panel: TARGET −6.0 LUFS, −6.4 LUFS integrated, TO TARGET −0.4 LU, SHORT-TERM −6.2 LUFS, MOMENTARY −6.9 LUFS, TRUE PEAK MAX −1.0 dBTP and PLR 5.4 dB.

Loudness against your target

Set a TARGET in LUFS and the loudness panel reads integrated loudness in large numerals, TO TARGET in LU, short-term and momentary loudness, the true-peak maximum and PLR. The loudness lane draws the short-term loudness over time against the TARGET line. TARGET changes nothing in the sound; click the panel to start a new measurement, for example at the top of the song.

  • Integrated LUFS
  • TO TARGET in LU
  • True-peak max and PLR
The LIMITER group with RELEASE at 120 ms and AUTO on, and the LOUDNESS group with TARGET at −6.0 LUFS and MATCH, reading MATCH OFF.

Judge it at equal loudness

Louder always sounds better, which makes a limiter impossible to judge by ear. MATCH plays the result at the input’s loudness, measured K-weighted over 3 seconds, so you hear what the limiting does to the sound rather than that it got louder. The meters still read the real output, and an offline bounce always leaves MATCH out.

  • Equal-loudness listening
  • K-weighted over 3 s
  • Left out of offline bounces
The controls along the bottom of the blue face: GAIN and CEILING under LEVEL; OPTO, FET, COMPRESS, ATTACK, RECOVERY and COLOUR under VINTAGE; RELEASE and AUTO under LIMITER; TARGET and MATCH under LOUDNESS.

Four colours, one layout

VEIRA’s four colour limiters are each painted their own colour: White in pearl, Red in deep lacquered red, Gold in brushed champagne and Blue in 1970s steel blue. They share one layout, the same loudness panel, TARGET and MATCH, so you can move between them and hear only the stage that gives each its character. The displays are dark screens set into the paint, and every label on the paint stands at least 4.5:1 against it.

  • White, Red, Gold, Blue
  • One layout
  • Text at 4.5:1 or more
The preset browser showing Default: Init, with previous, next and SAVE.

40 presets in 10 folders, each aimed at a target

Default, Mastering, Pop, EDM, Hip-Hop, Rock, Acoustic, Stems and Buses, Streaming and Creative. Each preset sets a LUFS TARGET, OPTO or FET and a GAIN found for its folder’s material, and every one was measured through the real plugin on its material and on a dense mix: no overs, and each preset whose target the material can reach lands within 0.1 LU of it. On your music, set GAIN by the loudness panel.

  • 10 folders
  • Within 0.1 LU of target
  • Save your own

Get VEIRA Limiter Blue

Pay once and it’s yours, with every future update included.

VEIRA Limiter Blue

The vintage one of VEIRA’s four colour limiters: an OPTO or FET levelling stage and transformer colour, like 1970s hardware, before a clean true-peak brickwall.

  • Yours to keep: pay once, no subscription
  • Every future update, free for life
  • VST3, AU, Standalone on up to 3 computers
  • Changed your mind? Cancel within 14 days (refunds)
USD

One-time payment, in your cart.

Welcome offer

Get 10% off your first order

Leave your email and we’ll send you a code for 10% off your first order, on any plugins. One code per person.

Specifications

Type
Vintage true-peak mastering limiter: an OPTO or FET levelling stage, a transformer and an output stage at 8x, before a clean brickwall with 3 ms lookahead
Gain
0 to +24 dB (set by hand; no automatic loudness)
Ceiling
−12 to 0 dBTP, always in true peak (ITU-R BS.1770); drag the line on the waveform, double-click for −1.0 dBTP
Vintage stage
OPTO (3:1, wide knee, programme-dependent recovery) or FET (4:1, fast); COMPRESS 0 to 100 % (0 % is out), ATTACK 0.1 to 50 ms, RECOVERY 30 to 3000 ms; it gives back its own average reduction
Colour
0 to 100 %: transformer iron on the lows only, an output stage that rounds the fastest peaks, and a top −1 dB at 20 kHz at 100 %; 0 % is clean
Release
5 to 1000 ms, or AUTO
Target
−24 to −3 LUFS (default −6); changes nothing in the sound
Listening
MATCH plays the result at the input’s loudness (K-weighted, 3 s); offline bounces always leave it out
Loudness (measured)
At the defaults, −3 dBFS peak premasters: −5.81 LUFS on a dense EDM mix (+10.9 dB of GAIN) and −5.75 LUFS on a pop mix, −1.05 dBTP, no overs; back GAIN off to sit right on −6
Latency
271 samples at 48 kHz (5.6 ms; 259 at 44.1 kHz), constant and reported to your DAW
Metering
Waveform with what was taken off; REDUCTION lane and meter; integrated, short-term and momentary LUFS; TO TARGET; true-peak max; PLR; IN and OUT peak and RMS
Presets
40 factory presets in 10 folders (Default, Mastering, Pop, EDM, Hip-Hop, Rock, Acoustic, Stems and Buses, Streaming, Creative), plus your own
Channels
Mono or stereo
Face
1970s steel blue, with cream print and black knobs; dark screens set into the paint
Window
1520 x 900 at 100 %, resizable from 75 to 200 %, saved with the session
CPU (measured)
About 18 % of one core of a 2-core cloud machine (stereo, 48 kHz)
Formats
VST3, AU, Standalone
macOS
macOS 11 or later, Apple silicon or Intel (universal). VST3, AU and Standalone.
Windows
Windows 10 or later, 64-bit. VST3 and Standalone.
Pro Tools
Pro Tools (AAX) versions are built and tested, and arrive once they’re signed for Pro Tools.
Latest version
0.1.0, released November 1, 2026 · What’s new

Read more on the blog: Four colours of limiter: clean, punchy, warm and vintage at −6 LUFS

Questions? 8 answers about VEIRA Limiter Blue

Works well with

VEIRA Limiter White

The clean one of VEIRA’s four colour limiters: a true-peak mastering limiter built for transparency. Bass is never clipped, held notes are never shaved and the mix doesn’t pump.

$149.99

VEIRA Limiter Red

The punchy one of VEIRA’s four colour limiters: a punch clipper before a true-peak limiter, so the drums keep hitting at loudness and the groove doesn’t duck.

$149.99

VEIRA Limiter Gold

The warm one of VEIRA’s four colour limiters: an oversampled tape or tube stage rounds the peaks with smooth, low-order harmonics before a clean true-peak brickwall.

$149.99