VEIRA Limiter Gold

The warm one of VEIRA’s four colour limiters: an oversampled tape or tube stage rounds the peaks with smooth, low-order harmonics before a clean true-peak brickwall.

$149.99, a one-time purchase with free updates

VEIRA Limiter Gold, painted brushed champagne gold, with +9.5 dB of GAIN, TAPE and WARMTH at 50 % on a dense premaster: the waveform with the output under the −1.0 dBTP ceiling, the REDUCTION lane with the warmth and the limiter, the LOUDNESS lane on the −6 LUFS TARGET, the IN and OUT meters, the REDUCTION meter at −7.2 dB and the loudness panel reading −6.1 LUFS integrated, and the LEVEL, WARMTH, LIMITER and LOUDNESS controls along the bottom.

VEIRA Limiter Gold is the warm one of VEIRA’s four colour limiters, a mastering limiter painted brushed champagne gold. GAIN and WEIGHT drive the music into a warmth stage that works like analog tape or a tube stage pushed a little: quiet signals pass at their own level, and the louder the music gets, the more the peaks round off and the body gains smooth, low-order harmonics. TAPE is symmetric and leads with the 3rd harmonic; TUBE leads with the 2nd for a fuller sound. The stage runs at eight times the sample rate, so nothing folds back.

A clean true-peak brickwall then holds the ceiling. On a dense mix Gold reached −6 LUFS with the ceiling held at −1 dBTP and no overs, where a plain limiter stops near −7: some WARMTH rounds the fastest peaks inside the waveform. At WARMTH 0 % it is a transparent true-peak limiter. The REDUCTION lane splits what the warmth rounded from what the limiter took, the loudness panel reads integrated loudness against your TARGET, and MATCH lets you judge it at equal loudness. The 40 factory presets in 10 folders each aim at a loudness target. Buy it once and VEIRA Manager installs it, like every plugin from VEIRA.

A tour of VEIRA Limiter Gold

VEIRA Limiter Gold, painted brushed champagne gold, with +9.5 dB of GAIN, TAPE and WARMTH at 50 % on a dense premaster: the waveform with the output under the −1.0 dBTP ceiling, the REDUCTION lane with the warmth and the limiter, the LOUDNESS lane on the −6 LUFS TARGET, the IN and OUT meters, the REDUCTION meter at −7.2 dB and the loudness panel reading −6.1 LUFS integrated, and the LEVEL, WARMTH, LIMITER and LOUDNESS controls along the bottom.
  1. The whole of VEIRA Limiter Gold

    VEIRA Limiter Gold is a mastering limiter painted brushed champagne gold. GAIN and WEIGHT drive the music into a warmth stage that works like analog tape or a tube stage pushed a little: quiet signals pass at their own level, and the louder the music gets, the more the peaks round off and the body gains harmonics. A clean true-peak brickwall then holds the ceiling. The REDUCTION lane splits what the warmth rounded from what the limiter took, and the loudness panel reads where you stand against your TARGET.

  2. Warmth and limiter

    The output in front, the ceiling you can drag, and what the warmth rounded and what the limiter took, over time.

  3. Reduction and loudness

    The reduction now, with the movement of a VU meter, and the loudness against your TARGET: integrated, TO TARGET, short-term, momentary, the true-peak maximum and PLR.

  4. In and out

    Input peak and output true peak, with short-term and integrated loudness and how much louder the output is, in LU.

  5. Warmth

    WARMTH sets how much tape or tube saturation the music gets, WEIGHT adds low end before it, and TAPE or TUBE chooses the character.

  6. Gain and ceiling

    GAIN pushes the music into the limiter; CEILING sets the highest the output may go, in true peak.

What VEIRA Limiter Gold does for you

WARMTH at 50 % and WEIGHT at 0 %.

Warmth that rounds the peaks

WARMTH sets how much tape or tube saturation the music gets before the limiter, at eight times the sample rate so its harmonics don’t fold back. TAPE is symmetric, mostly the 3rd harmonic, with tape’s record EQ around it; TUBE leads with the 2nd for a fuller, rounder sound. At the default 50 %, a 100 Hz note 3 dB under the ceiling gets about 1 % of harmonics, with the higher ones far down. At 0 % Gold is a transparent true-peak limiter.

  • TAPE or TUBE
  • 8x oversampled
  • Clean at 0 %
The WARMTH group: WARMTH at 50 %, WEIGHT at 0 %, and TAPE selected, filled in dark bronze, over TUBE.

WEIGHT for a fuller low end

WEIGHT is a gentle low shelf before the warmth stage, up to +3 dB under about 90 Hz, so the bass is fuller and drives the warmth a little more. Switching between TAPE and TUBE crossfades over 20 ms, so you can compare them while the song plays. With WARMTH at 0 % the two style buttons dim: the warmth stage is out, so the style makes no difference.

  • Up to +3 dB of low end
  • 20 ms crossfade
  • Compare while playing
A pop premaster at +9.5 dB of GAIN with TUBE, WARMTH 70 %, WEIGHT 50 %, a 60 ms RELEASE without AUTO and a −8.0 LUFS TARGET: integrated loudness reads −7.6 LUFS, TO TARGET +0.4 LU in green, and the REDUCTION lane shows the tube rounding the peaks over the limiter.

−6 LUFS, where a plain limiter stops

On a dense EDM premaster peaking at −3 dBFS, Gold at its defaults reached −5.98 LUFS at +10.2 dB of GAIN, with the true peak at −1.05 dBTP and no overs. A plain limiter stops near −7.1 LUFS on that mix, and so does Gold at WARMTH 0 %: some WARMTH rounds the fastest peaks inside the waveform, which is what reaches −6 LUFS. At −6 LUFS any limiter shapes the peaks; Gold’s colour is the gentle harmonics of tape or tubes, not grit.

  • −5.98 LUFS measured
  • −1.05 dBTP
  • No aliasing
The LEVEL group on the champagne-gold paint: the GAIN knob at +9.5 dB and the CEILING knob at −1.0 dBTP, each with its ring printed in dark bronze.

A true-peak ceiling with no overs

CEILING runs from −12 to 0 dBTP and holds in true peak, the peaks between the samples included, as streaming and broadcast delivery ask. Measured through the plugin on dense premasters and on every factory preset: no overs, read on a standard BS.1770 meter and on a finer 16x reconstruction. Drag the ceiling line on the waveform to set it, or double-click it for −1.0 dBTP.

  • −12 to 0 dBTP
  • No overs
  • BS.1770 true peak
The REDUCTION meter at −7.2 dB, and the loudness panel: TARGET −6.0 LUFS, −6.1 LUFS integrated, TO TARGET −0.1 LU, SHORT-TERM −6.1 LUFS, MOMENTARY −7.0 LUFS, TRUE PEAK MAX −1.0 dBTP and PLR 5.0 dB.

Loudness against your target

Set a TARGET in LUFS and the loudness panel reads integrated loudness in large numerals, TO TARGET in LU, short-term and momentary loudness, the true-peak maximum and PLR. The loudness lane draws the short-term loudness over time against the TARGET line. TARGET changes nothing in the sound; click the panel to start a new measurement, for example at the top of the song.

  • Integrated LUFS
  • TO TARGET in LU
  • True-peak max and PLR
The LIMITER group with RELEASE at 120 ms and AUTO on, and the LOUDNESS group with TARGET at −6.0 LUFS and MATCH, reading MATCH OFF.

Judge it at equal loudness

Louder always sounds better, which makes a limiter impossible to judge by ear. MATCH plays the result at the input’s loudness, measured K-weighted over 3 seconds, so you hear what the limiting does to the sound rather than that it got louder. The meters still read the real output, and an offline bounce always leaves MATCH out.

  • Equal-loudness listening
  • K-weighted over 3 s
  • Left out of offline bounces
The controls along the bottom of the gold face: GAIN and CEILING under LEVEL; WARMTH, WEIGHT, TAPE and TUBE under WARMTH; RELEASE and AUTO under LIMITER; TARGET and MATCH under LOUDNESS.

Four colours, one layout

VEIRA’s four colour limiters are each painted their own colour: White in pearl, Red in deep lacquered red, Gold in brushed champagne and Blue in 1970s steel blue. They share one layout, the same loudness panel, TARGET and MATCH, so you can move between them and hear only the stage that gives each its character. The displays are dark screens set into the paint, and every label on the paint stands at least 4.5:1 against it.

  • White, Red, Gold, Blue
  • One layout
  • Text at 4.5:1 or more
The preset browser showing Default: Init, with previous, next and SAVE.

40 presets in 10 folders, each aimed at a target

Default, Mastering, Pop, EDM, Hip-Hop, Rock, Acoustic, Stems and Buses, Streaming and Creative. Each preset sets a LUFS TARGET, a style and a GAIN found for its folder’s material, and every one was measured through the real plugin on its material and on a dense mix: no overs, and each preset whose target the material can reach lands within 0.1 LU of it. On your music, set GAIN by the loudness panel.

  • 10 folders
  • Within 0.1 LU of target
  • Save your own

Get VEIRA Limiter Gold

Pay once and it’s yours, with every future update included.

VEIRA Limiter Gold

The warm one of VEIRA’s four colour limiters: an oversampled tape or tube stage rounds the peaks with smooth, low-order harmonics before a clean true-peak brickwall.

  • Yours to keep: pay once, no subscription
  • Every future update, free for life
  • VST3, AU, Standalone on up to 3 computers
  • Changed your mind? Cancel within 14 days (refunds)
USD

One-time payment, in your cart.

Welcome offer

Get 10% off your first order

Leave your email and we’ll send you a code for 10% off your first order, on any plugins. One code per person.

Specifications

Type
Warm true-peak mastering limiter: an 8x oversampled tape or tube stage before a clean brickwall with 3 ms lookahead
Gain
0 to +24 dB (set by hand; no automatic loudness)
Ceiling
−12 to 0 dBTP, always in true peak (ITU-R BS.1770); drag the line on the waveform, double-click for −1.0 dBTP
Warmth
WARMTH 0 to 100 % (default 50 %; 0 % is clean); TAPE (mostly the 3rd harmonic) or TUBE (the 2nd leads), switching crossfades over 20 ms
Weight
0 to 100 %: a low shelf up to +3 dB under about 90 Hz, before the warmth
Release
5 to 1000 ms, or AUTO
Target
−24 to −3 LUFS (default −6); changes nothing in the sound
Listening
MATCH plays the result at the input’s loudness (K-weighted, 3 s); offline bounces always leave it out
Loudness (measured)
A dense EDM premaster at −3 dBFS peak, at the defaults: −5.98 LUFS at +10.2 dB of GAIN, −1.05 dBTP, no overs; at WARMTH 0 % it stops near −7.1 LUFS, like a plain limiter
Distortion (measured)
100 Hz at −4 dBFS: 1.0 % (TAPE, 3rd harmonic) or 1.4 % (TUBE, 2nd); aliasing under −115 dBc; under 0.0001 % at WARMTH 0 %
Latency
271 samples at 48 kHz (5.6 ms; 259 at 44.1 kHz), constant and reported to your DAW
Metering
Waveform with what was taken off; REDUCTION lane and meter; integrated, short-term and momentary LUFS; TO TARGET; true-peak max; PLR; IN and OUT peak and RMS
Presets
40 factory presets in 10 folders (Default, Mastering, Pop, EDM, Hip-Hop, Rock, Acoustic, Stems and Buses, Streaming, Creative), plus your own
Channels
Mono or stereo
Face
Brushed champagne gold, with dark bronze print and black knobs; dark screens set into the paint
Window
1360 x 900 at 100 %, resizable from 75 to 200 %, saved with the session
CPU (measured)
About 18 % of one core of a 2-core cloud machine (stereo, 48 kHz)
Formats
VST3, AU, Standalone
macOS
macOS 11 or later, Apple silicon or Intel (universal). VST3, AU and Standalone.
Windows
Windows 10 or later, 64-bit. VST3 and Standalone.
Pro Tools
Pro Tools (AAX) versions are built and tested, and arrive once they’re signed for Pro Tools.
Latest version
0.1.0, released November 1, 2026 · What’s new

Read more on the blog: Four colours of limiter: clean, punchy, warm and vintage at −6 LUFS

Questions? 8 answers about VEIRA Limiter Gold

Works well with

VEIRA Limiter White

The clean one of VEIRA’s four colour limiters: a true-peak mastering limiter built for transparency. Bass is never clipped, held notes are never shaved and the mix doesn’t pump.

$149.99

VEIRA Limiter Red

The punchy one of VEIRA’s four colour limiters: a punch clipper before a true-peak limiter, so the drums keep hitting at loudness and the groove doesn’t duck.

$149.99

VEIRA Limiter Blue

The vintage one of VEIRA’s four colour limiters: an OPTO or FET levelling stage and transformer colour, like 1970s hardware, before a clean true-peak brickwall.

$149.99