VEIRA Bass Rider

Rides a bass track’s fader for you, the way an engineer rides it through a song: set where the bass should sit, and one console fader evens out the sections and passages, within the limits you set.

$39.99, a one-time purchase with free updates

VEIRA Bass Rider with the Init preset while a bass line plays: the RIDE display on the left with the bass line coming in and going out against TARGET and IGNORE BELOW over the last six seconds and the fader’s moves under it, the console fader in the middle lifted to +4.1 dB, the IN and OUT meter bridge on the right, and LEVEL, MOTION, AUTOMATION and OUTPUT along the bottom.

VEIRA Bass Rider rides a bass track’s fader for you, the way an engineer rides it through a song. You set TARGET, where the bass should sit in the mix, in LUFS, and one console fader in the middle of the window moves up and down to keep it there: a quiet verse comes up and a hard-hit chorus goes down, within the limits you set with RANGE DOWN and RANGE UP. It is made to even out sections and passages, not single notes, so the player’s attacks, decays and accents stay as played.

It listens to the notes: the bass’s loudness under 1.5 kHz, so string, fret and slap noise don’t count, over several cycles of a low note, so a held note doesn’t make it ripple. While a note dies away it holds, so an 808’s tail isn’t lifted and the next attack isn’t ducked, and the rests and bleed are left alone. LOOKAHEAD hears 25 ms ahead, the RIDE display shows the bass in and out against TARGET with the fader’s moves under it, and WRITE records the ride into your DAW as automation you can edit.

A tour of VEIRA Bass Rider

VEIRA Bass Rider with the Init preset while a bass line plays: the RIDE display on the left with the bass line coming in and going out against TARGET and IGNORE BELOW over the last six seconds and the fader’s moves under it, the console fader in the middle lifted to +4.1 dB, the IN and OUT meter bridge on the right, and LEVEL, MOTION, AUTOMATION and OUTPUT along the bottom.
  1. The whole of VEIRA Bass Rider

    VEIRA Bass Rider does what a mix engineer’s hand does on the bass fader: up for a quiet verse, down for a hard-hit chorus, so the bass holds its place under the kick from the first bar to the last. You set TARGET, where the bass should sit in LUFS, and one console fader moves smoothly to keep it there, within RANGE DOWN and RANGE UP. It evens out sections and passages, not single notes: the player’s attacks and decays stay as played, an 808’s tail isn’t lifted, and the rests and bleed are left alone. LOOKAHEAD catches a loud chorus before it plays, and WRITE records the whole ride as automation you can edit.

  2. The ride

    The bass line in and out against TARGET over six seconds, with the fader’s moves under it; drag the lines to set them.

  3. The fader

    The fader the rider moves, with the RANGE stops beside it; in READ you move it by hand.

  4. Where it sits

    TARGET, where the bass should sit in LUFS, and IGNORE BELOW, under which the fader keeps still.

  5. How it moves

    SPEED, how quickly the fader follows, and how far it may go down and up.

  6. Automation and output

    RIDE, WRITE the ride as automation, or READ it back; OUTPUT, and LOOKAHEAD to hear 25 ms ahead.

What VEIRA Bass Rider does for you

RIDE: the bass line’s level coming in (a grey area) and going out (an amber line) against the green TARGET line and the red IGNORE BELOW line, and below it the fader’s moves over the last six seconds.

One fader, riding the bass

Set TARGET, where the bass should sit, and the fader does the rest: a quiet verse comes up, a hard-hit chorus goes down, smoothly, like a hand on the fader rather than a compressor on every attack. The punch of each note stays as played. Across the factory bank the notes sit within 1.4 LU of TARGET.

  • Sections, not notes
  • Attacks as played
  • Within 1.4 LU
The level lane of RIDE: the bass line coming in and going out, in LUFS, against TARGET −24.0 and IGNORE BELOW −50.0.

It listens to the notes

The rider hears the bass’s loudness the way a loudness meter does, K-weighted, low-passed at 1.5 kHz so string, fret and slap noise don’t count, and averaged over several cycles of a low note. A 41 Hz note held for ten seconds moves the fader less than 0.001 dB, even at full SPEED.

  • K-weighted, in LUFS
  • Under 1.5 kHz
  • No ripple on low notes
The fader lane of RIDE: the fader’s moves over six seconds, lifting above 0 dB and turning down below it, with the range as dashed lines.

808 tails ring as played

While a note dies away, the fader holds: it follows each note’s body, not its decay. So an 808’s long tail isn’t lifted, the next attack isn’t ducked, and a rest doesn’t move the fader. With 2-second 808 notes the fader rose 0.00 dB through each tail at the default SPEED, and across the factory bank it moved 0.03 dB at most across a rest.

  • Tails not lifted
  • Attacks not ducked
  • Rests left alone
The console fader from −24 to +24 dB, with the RANGE UP and RANGE DOWN stops beside it and its position in dB under it.

A console fader with stops

A console fader from −24 to +24 dB sits in the middle of the window and moves as the rider works, with its value under it. Beside it, two triangles set RANGE UP and RANGE DOWN, how far the rider may move it either way: drag them, or turn the knobs. Set one to 0 dB and the rider only lifts, or only turns down.

  • −24 to +24 dB
  • Drag the stops
  • Lift only or cut only
MOTION: SPEED at 26 %, RANGE DOWN at −6.0 dB and RANGE UP at +6.0 dB.

Speed you set by ear

SPEED goes from a slow hand that rides whole sections to a fast one that rides phrases. The fader always turns down twice as fast as it lifts, because a passage that booms matters more than a quiet one that comes up a moment late, and a sudden jump of more than 3 dB is caught in 5 ms.

  • Sections or phrases
  • Down twice as fast
  • Jumps caught in 5 ms
OUTPUT: the OUTPUT knob at 0.0 dB and the LOOKAHEAD button, lit.

Never late on a loud chorus

LOOKAHEAD lets the rider hear 25 ms ahead, so a loud note after a quiet passage is already turned down when it plays: +0.9 dB over its settled level in the tests, against +11.2 dB for its first 60 ms without it. The 25 ms are reported to your DAW, which keeps the bass in time with the kick, also when the plugin is bypassed.

  • 25 ms, compensated
  • On by default
  • Off: no latency
AUTOMATION: the RIDE, WRITE and READ buttons, with RIDE lit.

Write the ride as automation

RIDE rides live. WRITE sends every move to the FADER parameter, so your DAW records the ride as automation, about 30 points a second; READ plays it back, and you can drag the fader by hand. Edit the lane like any automation, lift a fill or pull down a note that booms, and the ride is yours to keep.

  • RIDE, WRITE, READ
  • Editable automation
  • Ride by hand in READ
The preset browser showing Default: Init, with previous, next and SAVE.

44 presets, each one measured

Eleven folders: Electric Bass, Pop & R&B, Rock & Metal, Slap & Funk, Upright & Acoustic, Synth Bass, 808 & Sub, Hip-Hop & Trap, Live & Worship and Creative, each with a TARGET that suits its style’s level. Each was measured on matching bass lines: the riding presets even a bass by 13 to 41 % while its notes keep their own decays and accents. Each note says what to set first.

  • 11 folders
  • TARGET per style
  • Save your own

Get VEIRA Bass Rider

Pay once and it’s yours, with every future update included.

VEIRA Bass Rider

Rides a bass track’s fader for you, the way an engineer rides it through a song: set where the bass should sit, and one console fader evens out the sections and passages, within the limits you set.

  • Yours to keep: pay once, no subscription
  • Every future update, free for life
  • VST3, AU, Standalone on up to 3 computers
  • Changed your mind? Cancel within 14 days (refunds)
USD

One-time payment, in your cart.

Welcome offer

Get 10% off your first order

Leave your email and we’ll send you a code for 10% off your first order, on any plugins. One code per person.

Specifications

Type
Automatic bass rider: one console fader moved after the bass’s loudness, within a range you set, with automation write and read; it evens sections and passages, not single notes
Detector
K-weighted loudness (ITU-R BS.1770) under 1.5 kHz, over 40 ms (several cycles of a low note); holds while a note dies away, in the rests and under IGNORE BELOW
Level
TARGET −40 to −6 LUFS (default −24); IGNORE BELOW −80 to −20 LUFS (default −50)
Motion
SPEED 0 to 100 % (default 26 %: sections at the bottom, phrases at the top); turns down twice as fast as it lifts; RANGE DOWN and RANGE UP 0 to 24 dB (default 6 dB each)
Fader and automation
Console fader −24 to +24 dB; RIDE, WRITE (sends the moves to the FADER parameter for your DAW to record) and READ (plays it back, or ride by hand); OUTPUT −12 to +12 dB
Latency
LOOKAHEAD on (default): 25 ms (1,200 samples at 48 kHz), reported to the host, also when bypassed; off: none
Transparency
With RANGE 0 / 0 dB and OUTPUT at 0 dB the output is the input, delayed, bit for bit, at any block size
Display and metering
RIDE: the last 6 s of the level in and out against TARGET and IGNORE BELOW, and the fader’s moves; IN and OUT peak and RMS, short-term and integrated loudness, OUT − IN in LU
Channels
Mono or stereo; one fader for both channels
Presets
44 factory presets in 11 folders (Electric Bass, Pop & R&B, Rock & Metal, Slap & Funk, Upright & Acoustic, Synth Bass, 808 & Sub, Hip-Hop & Trap, Live & Worship, Creative), plus your own
CPU (measured)
About 0.6 % of one core (stereo, 48 kHz)
Formats
VST3, AU, Standalone
macOS
macOS 11 or later, Apple silicon or Intel (universal). VST3, AU and Standalone.
Windows
Windows 10 or later, 64-bit. VST3 and Standalone.
Pro Tools
Pro Tools (AAX) versions are built and tested, and arrive once they’re signed for Pro Tools.
Latest version
0.2.1, released October 31, 2026 · What’s new

Read more on the blog: Riding the bass: keep a bass line steady from verse to chorus · Mixing bass and kick together: an even, clear low end

Questions? 7 answers about VEIRA Bass Rider

Works well with

VEIRA Bass DI Enhancer

A whole bass chain on one knob: an even low end, harmonics and a finished tone, at the same level.

$24.99

VEIRA Sub Control

A compressor for the low end only, beside a bass enhancer that makes it carry on any speaker.

$49.99

VEIRA Vocal Rider

Rides a vocal’s fader for you, the way an engineer rides it through a song: set where the vocal should sit, and one console fader moves up and down to keep it there, within the limits you set.

$39.99