VEIRA Tape Saturator

A 2-inch, 24-track tape machine: four tapes, three speeds, and reels that turn with your song.

$39.99, a one-time purchase with free updates

VEIRA Tape Saturator with the Warm Mix Bus preset while a mix plays: the 2-inch, 24-track transport with its two 14-inch reels, the tape counter and lamps, the TAPE TYPE and SPEED buttons and the ERASE, RECORD and PLAY heads; below it the RECORD LEVEL VU meters, DRIVE, the RESPONSE display, the IN and OUT meters with loudness, and the FILTERS, TRANSPORT and OUTPUT controls.

VEIRA Tape Saturator puts a 2-inch, 24-track studio tape machine on your drums, bass, vocals, mix bus or master: the sound of recording onto analogue tape and playing it back. Push DRIVE for glue, warmth or grit while the VU meters show how hard the tape is hit, pick one of four tapes and one of three speeds, and add the machine’s wow, flutter and hiss when you want the movement and the noise of a real transport.

What sets it apart is that the tape is modelled, not imitated. The saturation comes from a physical model of magnetic hysteresis that behaves the same at every sample rate, with the record and playback EQ of each speed, so loud highs saturate first, as on a real machine. AUTO GAIN keeps your level while DRIVE changes only the saturation, and the whole plugin is the machine: 14-inch reels that turn with your song and waver with WOW and FLUTTER, a record head that glows as the tape saturates, and the machine’s response drawn over your spectrum.

A tour of VEIRA Tape Saturator

VEIRA Tape Saturator with the Warm Mix Bus preset while a mix plays: the 2-inch, 24-track transport with its two 14-inch reels, the tape counter and lamps, the TAPE TYPE and SPEED buttons and the ERASE, RECORD and PLAY heads; below it the RECORD LEVEL VU meters, DRIVE, the RESPONSE display, the IN and OUT meters with loudness, and the FILTERS, TRANSPORT and OUTPUT controls.
  1. The whole of VEIRA Tape Saturator

    VEIRA Tape Saturator is a 2-inch, 24-track studio tape recorder: the sound of recording onto analogue tape and playing it back. DRIVE sets how hard the tape is hit while two VU meters show the record level, four TAPE TYPES go from clean and modern to old and worn, and the SPEED (7.5, 15 or 30 ips) moves the head bump, the top end and how soon loud highs saturate. WOW, FLUTTER and HISS add the transport’s speed changes and the tape’s noise, and LOW CUT and HIGH CUT decide what reaches the tape.

  2. The machine

    A 2-inch, 24-track transport: reels that turn with your song, the heads, the counter and lamps, and the TAPE TYPE and SPEED buttons.

  3. Record level

    DRIVE sets how hard the tape is hit; the VU meters show what it receives, after the filters.

  4. The machine’s response

    The head bump, the top end and the filters at this tape and speed, over the spectrum in and out. Drag LOW CUT and HIGH CUT here.

  5. In and out

    Peak and RMS for the input and the output, with short-term and integrated loudness.

  6. Filters, transport and output

    LOW CUT and HIGH CUT before the tape; WOW, FLUTTER and HISS; AUTO GAIN, MIX and OUTPUT.

What VEIRA Tape Saturator does for you

The tape path: the tension rollers, the ERASE, RECORD and PLAY heads under the VEIRA 24 TRACK · 2 INCH plate, and the capstan with its pinch roller.

Tape saturation from a physical model

The tape is the Jiles-Atherton model of magnetic hysteresis: how the tape’s magnetisation follows the recording field. It runs 4x oversampled at 44.1 and 48 kHz and behaves the same at every sample rate: the 3rd harmonic at +6 VU agrees within 0.01 dB from 44.1 to 192 kHz. Quiet signals pass at their own level, loud ones are rounded off softly, and loud highs such as a piano’s hammers or sibilants don’t leave thumps in the lows.

  • Jiles-Atherton hysteresis
  • The same at every sample rate
  • 4x oversampling at 48 kHz
The TAPE TYPE buttons (MODERN, CLASSIC, WARM, WORN) and the SPEED IPS buttons (7.5, 15, 30) on the transport, the chosen ones lit.

Four tapes, from clean to worn

TAPE TYPE picks the tape. MODERN is a high-output tape, clean, with lots of headroom and odd harmonics only. CLASSIC is the classic studio tape: soft saturation with a touch of 2nd harmonic. WARM is older tape with less headroom, the 2nd harmonic about as strong as the 3rd, a bigger head bump and a softer top. WORN is tired tape on a worn machine: grit even at low levels, a duller top and more noise. Switching while the music plays never clicks.

  • MODERN, CLASSIC, WARM, WORN
  • 3 % THD at +6.1 to +12.7 VU
  • Switches without a click
The RESPONSE display from 20 Hz to 20 kHz: the machine’s response as a light line over the output spectrum in amber and the input in grey, with the LOW CUT and HIGH CUT handles.

Three speeds, three low ends

SPEED changes what the machine does to your tone. At 7.5, 15 and 30 ips the head bump sits at about 32, 55 and 100 Hz, and the top softens as the tape slows: −3.8 dB at 15 kHz at 7.5 ips, −0.5 dB at 20 kHz at 15 ips, flat at 30 ips. Slower tape also saturates loud highs sooner: at +6 VU a 10 kHz tone is squeezed 2.0 dB more than a 1 kHz tone at 7.5 ips, and 0.15 dB more at 30 ips. The RESPONSE display draws the machine’s curve over your spectrum; hover to read it at any frequency.

  • 7.5, 15 or 30 ips
  • Head bump at 32, 55 or 100 Hz
  • Hover read-out
The RECORD LEVEL VU meters, L and R, marked 0 VU = −18 dBFS, and the DRIVE knob with its readout in dB.

Set the level by the VU meters

DRIVE sets how hard the tape is hit, from −12 to +24 dB, and two VU meters with real VU ballistics show what the tape receives, after the filters. 0 VU is a sine at −18 dBFS RMS, so a track peaking around −8 dBFS sits a little under 0 VU at DRIVE 0. As the tape saturates, the RECORD head glows and the SAT lamp lights.

  • DRIVE −12 to +24 dB
  • 0 VU = −18 dBFS RMS
  • IEC 60268-17 VU ballistics
OUTPUT: the AUTO GAIN button and the MIX and OUTPUT knobs.

More tape, not more level

AUTO GAIN, on by default, takes DRIVE back off after the tape and gives back what the saturation takes off a 0 VU tone, so DRIVE changes the saturation and not the level: a 0 VU tone comes out as loud at DRIVE +18 dB as at 0, on every tape. MIX blends the tape with the dry signal, lined up by the latency, for parallel tape, and OUTPUT trims from −24 to +12 dB. The meter bridge shows IN and OUT peak, RMS and loudness, with OUT − IN in LU.

  • AUTO GAIN
  • Parallel tape with MIX
  • OUT − IN in LU
FILTERS BEFORE THE TAPE: the LOW CUT and HIGH CUT knobs with their readouts.

Choose what the tape saturates

LOW CUT (up to 1 kHz) and HIGH CUT (down to 1 kHz) sit before DRIVE and the tape, at 12 dB/octave, so they decide what reaches it: a LOW CUT keeps rumble and sub out of the saturation, a HIGH CUT keeps cymbals and sibilants from hitting the tape. They are handles on the RESPONSE display too (double-click one to switch it off), and with MIX the dry signal keeps its full range.

  • 12 dB/octave
  • Before the tape
  • Drag on the display
TRANSPORT: the WOW, FLUTTER and HISS knobs with their readouts in percent.

Wow, flutter and hiss

WOW adds the transport’s slow speed changes: a periodic wow, faster at higher speeds, and a slow random drift. FLUTTER adds the fast ones from the capstan and the rollers, and scrape flutter, up to 0.3 %. Both have a squared taper, so low settings stay subtle. HISS adds the tape’s own noise: 50 % is the real noise floor of the tape at its speed, 100 % is 12 dB more, and 0 % is true silence. With AUTO GAIN, a harder-driven tape has less hiss against the music, as on a real machine.

  • WOW and FLUTTER
  • Squared taper
  • Silent at HISS 0 %
The transport: two 14-inch reels with the tape running over the rollers, past the ERASE, RECORD and PLAY heads and the capstan; the STOP, PLAY, REC and SAT lamps around the red TAPE TIME counter; and the TAPE TYPE and SPEED IPS buttons.

A tape machine you can watch

The whole plugin is a 2-inch, 24-track studio machine. Two 14-inch reels turn while your song plays, at the tape’s speed, the take-up reel faster than the full supply reel, and they waver with WOW and FLUTTER. The tape runs over the rollers, past the ERASE, RECORD and PLAY heads and between the capstan and the pinch roller, its colour following the TAPE TYPE. TAPE TIME shows the song position in red LED digits, and STOP, PLAY, REC and SAT light up with the transport.

  • 14-inch reels
  • Turn with your song
  • Red LED tape counter
The preset browser showing Mix Bus: Warm Mix Bus, with previous, next and SAVE.

76 presets, each one measured

Thirteen folders, from Drums, Bass and Guitar to Vocals, Mix Bus and Mastering, plus Lo-Fi (cassette, worn loops, a pocket recorder, warbly pads) and Creative FX (AM radio, seasick and broken-reel pitch, an underwater mix). Each was set by the VU meters for its material and measured with the real processor: outside Mastering, every preset stays within 0.2 dB of bypass, and none on a track, the drums or the mix bus peaks above −5 dBFS.

  • 13 folders
  • Save your own
  • Recalled with your session

Get VEIRA Tape Saturator

Pay once and it’s yours, with every future update included.

VEIRA Tape Saturator

A 2-inch, 24-track tape machine: four tapes, three speeds, and reels that turn with your song.

  • Yours to keep: pay once, no subscription
  • Every future update, free for life
  • VST3, AU, Standalone on up to 3 computers
  • Changed your mind? Cancel within 14 days (refunds)
USD

One-time payment, in your cart.

Welcome offer

Get 10% off your first order

Leave your email and we’ll send you a code for 10% off your first order, on any plugins. One code per person.

Specifications

Type
Tape saturator: a 2-inch, 24-track studio tape machine, with the Jiles-Atherton model of magnetic hysteresis
Tape type
MODERN, CLASSIC, WARM or WORN; 3 % THD at +12.7, +9.4, +6.8 and +6.1 VU
Speed
7.5, 15 or 30 ips; head bump at about 32, 55 and 100 Hz
Drive
−12 to +24 dB; 0 VU = a sine at −18 dBFS RMS
Filters
LOW CUT 20 Hz (off) to 1 kHz, HIGH CUT 1 kHz to 20 kHz (open); 12 dB/octave, before the tape
Transport
WOW and FLUTTER 0 to 100 % (squared taper; FLUTTER up to 0.3 %); HISS 0 to 100 % (50 % is the tape’s real noise floor, 100 % is 12 dB more)
Output
AUTO GAIN (on by default); MIX 0 to 100 %, dry path delay-compensated; OUTPUT −24 to +12 dB
Oversampling
4x at 44.1 and 48 kHz, 2x at 88.2 and 96 kHz, none above; linear-phase filters
Latency
254 samples at 48 kHz (240 at 44.1 kHz, 437 at 96 kHz, 738 at 192 kHz), reported to your DAW; at MIX 0 % and bypassed, the input delayed by the latency, bit for bit
Metering
RECORD LEVEL VU meters, L and R (−20 to +3 VU, IEC 60268-17); RESPONSE display 20 Hz to 20 kHz: the machine’s response over the spectrum in and out; IN and OUT peak and RMS; short-term and integrated LUFS
The machine
Two 14-inch reels that turn with your DAW’s transport and waver with WOW and FLUTTER; ERASE, RECORD and PLAY heads; STOP, PLAY, REC and SAT lamps; TAPE TIME counter
Presets
76 factory presets in 13 folders (including Lo-Fi and Creative FX), plus your own
Channels
Mono or stereo
CPU (measured)
About 8 to 11 % of one core with everything on (stereo, 48 kHz, on a 2-core cloud machine)
Formats
VST3, AU, Standalone
macOS
macOS 11 or later, Apple silicon or Intel (universal). VST3, AU and Standalone.
Windows
Windows 10 or later, 64-bit. VST3 and Standalone.
Pro Tools
Pro Tools (AAX) versions are built and tested, and arrive once they’re signed for Pro Tools.
Latest version
0.2.0, released October 31, 2026 · What’s new

Read more on the blog: Tape saturation: what it does to a mix and how much to use · Saturation in a mix: adding harmonics and colour with tape and tube

Questions? 9 answers about VEIRA Tape Saturator

Works well with

VEIRA Comp

A tube-coloured compressor you can read like an instrument.

$149.99

VEIRA Max

A loud, clean mastering limiter that shows every decibel it takes.

$149.99

VEIRA Echo

A modern stereo delay that shows every repeat, with rhythm, pitch and movement built in.

$69.99