VEIRA Overdrive

A drive pedal for any track, not just guitar: overdrive, distortion and fuzz in one black enamel stomp box, with a low end that stays clean and a level that stays put while you turn DRIVE.

$49.99, a one-time purchase with free updates

VEIRA Overdrive, a black enamel pedal with cream knobs, with the preset Crunch Rhythm: the big knobs DRIVE at 60 %, TONE at +15 % and LEVEL at −1.5 dB; under them the small knobs BODY at Off, FOCUS at 600 Hz and MIX at 100 %; the CIRCUIT slide switch on OVERDRIVE, the amber lamp over the steel footswitch, and the preset browser at the top.

VEIRA Overdrive is a drive pedal for any track. Behind one slide switch sit three pedal circuits, OVERDRIVE, DISTORTION and FUZZ, under three big cream knobs on a black enamel box: DRIVE, TONE and LEVEL. It is made for the levels and the range of drums, basses, keys, voices and whole mixes, not only a guitar’s: BODY sends the lows around the circuit so the low end stays clean, FOCUS sets where the drive starts, and MIX blends the driven sound with the clean one, in time.

It is a stomp box, not a saturator: where VEIRA’s saturators colour a sound with curves, bands and meters, this is six knobs, a footswitch and a lamp that glows with how hard the circuit clips. The level is matched as DRIVE goes up, so you judge the colour, not the loudness, and the circuits run at 8x the sample rate to keep the top end clean. Its 41 factory presets come in eight folders, from Drums and Bass to Vocals, Mix Bus and Creative FX. Buy it once and VEIRA Manager installs it, like every plugin from VEIRA.

A tour of VEIRA Overdrive

VEIRA Overdrive, a black enamel pedal with cream knobs, with the preset Crunch Rhythm: the big knobs DRIVE at 60 %, TONE at +15 % and LEVEL at −1.5 dB; under them the small knobs BODY at Off, FOCUS at 600 Hz and MIX at 100 %; the CIRCUIT slide switch on OVERDRIVE, the amber lamp over the steel footswitch, and the preset browser at the top.
  1. The whole of VEIRA Overdrive

    VEIRA Overdrive is a stomp box for the whole session. Three pedal circuits sit behind one slide switch, OVERDRIVE, DISTORTION and FUZZ, made for the levels and the range of drums, basses, keys, voices and whole mixes, not only a guitar’s. BODY sends the lows around the circuit so the low end stays clean, FOCUS sets where the drive starts, and the level is matched as DRIVE goes up, so you judge the colour, not the loudness. A footswitch, a lamp that glows with how hard the circuit clips, and 41 presets in 8 folders.

  2. Three circuits

    OVERDRIVE, DISTORTION or FUZZ, on one slide switch.

  3. The big three

    DRIVE for how hard, TONE for darker or brighter, LEVEL for the output.

  4. Made for any track

    BODY keeps the lows clean, FOCUS sets where the drive starts, MIX blends.

  5. Footswitch and lamp

    On or off, in time; the lamp glows with how hard the circuit clips.

  6. Presets

    41 in 8 folders, each as loud as the bypassed track.

What VEIRA Overdrive does for you

The CIRCUIT slide switch with OVERDRIVE chosen; DISTORTION and FUZZ to its right.

Three pedals behind one switch

OVERDRIVE clips softly beside the clean sound, so it stays touch-sensitive and pushes the mids; at DRIVE 0 % it is the input. DISTORTION drives against a firm ceiling with a short knee: thicker, more compressed, sustaining. FUZZ has two unequal halves and a bias that follows how hard it is driven: even harmonics, and a buzzing pulse when pushed. The slide switch crossfades from one to the next over 20 ms, so you can change the circuit while the music plays. Measured on a 1 kHz tone at −18 dBFS with DRIVE at 60 %: 26 % THD in OVERDRIVE, 41 % in DISTORTION and 47 % in FUZZ.

  • Overdrive, distortion, fuzz
  • Switch while playing
  • Up to 60 dB of gain
The big DRIVE knob at 60 %, its value under it.

The colour, not the loudness

A real pedal gets louder as you turn it up, and louder always sounds better at first. Here the level is matched as DRIVE rises: a 1 kHz tone at −18 dBFS stays within 0.02 dB from DRIVE 0 to 100 % in every circuit, so the knob changes the colour and you judge the sound. Dense material is compressed more than a tone, so heavy settings can come out a little quieter or louder; LEVEL, from −24 to +12 dB, sets the pedal’s output.

  • Level-matched
  • Within 0.02 dB on a tone
  • LEVEL −24 to +12 dB
The three small knobs: BODY at Off, FOCUS at 600 Hz and MIX at 100 %.

A low end that stays clean

Put a kick, a bass or a whole mix through a drive and the low end is the first thing to turn to mud. BODY sends everything under it around the circuit untouched, through a 24 dB/oct crossover you set from 20 Hz (Off) to 400 Hz. Measured with BODY at 200 Hz and DRIVE at 100 %: a 60 Hz tone through OVERDRIVE keeps its level within 0.03 dB, with harmonics at −107 dB. With BODY on, the clean side of MIX takes the crossover’s phase turn too, so a half-and-half blend cuts no notch.

  • Off to 400 Hz
  • 24 dB/oct crossover
  • No notch with MIX
The lower half of the pedal: BODY, FOCUS and MIX, the CIRCUIT slide switch on OVERDRIVE, the lamp over the footswitch, and the name plate OVERDRIVE, DRIVE FOR ANY TRACK.

FOCUS sets where the drive starts

What makes a pedal sound like a pedal is where it clips, not only how. Each circuit drives the part of the sound above FOCUS, from 80 Hz to 2 kHz, and leaves what is under it clean. Set it high to drive the mids and highs and leave the low end whole: the crack of a snare, the presence of a voice, the top of the hi-hats. Set it low to drive the whole sound. TONE then tilts the result around 1 kHz, up to 9 dB each way: darker to the left, brighter to the right.

  • FOCUS 80 Hz to 2 kHz
  • TONE ±9 dB tilt
  • Six knobs
The three big cream knobs on the black enamel pedal: DRIVE at 60 %, TONE at +15 % and LEVEL at −1.5 dB.

Clean at eight times the rate

The circuits run at 8x the session’s sample rate, and each curve is applied in a way that suppresses what would fold back into the sound as aliasing. Measured on a 5 kHz tone with DRIVE at 100 %, the largest component that is not a harmonic sits at −82 dB in OVERDRIVE, −77 dB in DISTORTION and −74 dB in FUZZ. A smoothing filter closes as DRIVE rises, the way a pedal darkens when it is pushed, and every gain glides, so any knob can be automated.

  • 8x oversampling
  • Aliasing at −74 dB or lower
  • Everything automatable
The amber lamp, glowing, over the steel footswitch.

A footswitch that keeps time

The footswitch turns the pedal on or off, and the lamp tells you what it is doing: it glows a little while the pedal is on, brightens with how hard the circuit clips, and goes out when the pedal is off. The latency is 96 samples at every sample rate and setting, reported to the host. Switched off, the pedal passes the input delayed by the same 96 samples, bit for bit, as the host’s bypass and MIX at 0 % do, so the track stays in time. Presets leave the footswitch where it is.

  • Lamp follows the clipping
  • 96 samples, always
  • Bit for bit when off
The preset browser showing Guitar: Crunch Rhythm, with previous, next and SAVE.

41 presets in 8 folders

Default, Drums, Bass, Guitar, Keyboards, Vocals, Mix Bus and Creative FX: from Kick Punch, Snare Crack and Parallel Smash to Bass Growl, Edge Of Breakup, Electric Piano Bark, Vocal Edge, Bus Warmth and Blown Speaker. Each preset’s LEVEL is set so that its material comes out as loud as the bypassed track, within 0.05 dB on test material that matches its use, and each has a one-sentence note that says what to turn next.

  • 8 folders
  • Level-matched to bypass
  • A note on each

Get VEIRA Overdrive

Pay once and it’s yours, with every future update included.

VEIRA Overdrive

A drive pedal for any track, not just guitar: overdrive, distortion and fuzz in one black enamel stomp box, with a low end that stays clean and a level that stays put while you turn DRIVE.

  • Yours to keep: pay once, no subscription
  • Every future update, free for life
  • VST3, AU, Standalone on up to 3 computers
  • Changed your mind? Cancel within 14 days (refunds)
USD

One-time payment, in your cart.

Welcome offer

Get 10% off your first order

Leave your email and we’ll send you a code for 10% off your first order, on any plugins. One code per person.

Specifications

Type
Drive pedal: three circuits, OVERDRIVE, DISTORTION and FUZZ, run at 8x the sample rate; mono and stereo
Circuits
OVERDRIVE (soft clipping beside the clean sound; at DRIVE 0 % it is the input), DISTORTION (a firm ceiling with a short knee), FUZZ (two unequal halves and a bias that follows the drive: even harmonics); the switch crossfades over 20 ms
Big knobs
DRIVE 0 to 100 % (default 35 %): 0 to 40 dB of gain in OVERDRIVE, 0 to 50 dB in DISTORTION, 6 to 60 dB in FUZZ; TONE −100 to +100 % (0 %), a tilt around 1 kHz, up to 9 dB each way; LEVEL −24 to +12 dB (0.0 dB)
Small knobs
BODY Off (20 Hz) to 400 Hz (Off): the lows under it go around the circuit, 24 dB/oct; FOCUS 80 Hz to 2 kHz (720 Hz): where the drive starts; MIX 0 to 100 % (100 %), the driven sound against the clean one, in time
Footswitch and lamp
The footswitch turns the pedal on or off and is not changed by presets; the lamp glows while the pedal is on and brightens with how hard the circuit clips, full at 12 dB over the clipping level
Level match (measured)
A 1 kHz tone at −18 dBFS stays within 0.02 dB at DRIVE 0 to 100 % in every circuit; dense material can come out a little quieter or louder, which is what LEVEL is for
Harmonics (measured)
1 kHz at −18 dBFS, DRIVE 60 %: THD 26 % (OVERDRIVE), 41 % (DISTORTION), 47 % (FUZZ); OVERDRIVE and DISTORTION make odd harmonics only, FUZZ a 2nd harmonic at −11 dB
Aliasing (measured)
A 5 kHz tone at −12 dBFS, the largest component that is not a harmonic, 20 Hz to 20 kHz: −82 dB (OVERDRIVE), −77 dB (DISTORTION), −74 dB (FUZZ) at DRIVE 100 %
Latency
96 samples at every sample rate and setting (2.0 ms at 48 kHz), constant, reported to the host; the host’s bypass, the footswitch and MIX 0 % pass the input delayed to match, bit for bit
Parameters
8, all automatable
Presets
41 factory presets in 8 folders, level-matched to bypass within 0.05 dB (K-weighted), plus your own
Window
1100 x 700 at 100 %, resizable from 75 to 200 % or to fit the screen (button, corner grip or Cmd/Ctrl + and −), opens at 100 %, saved with the session
Formats
VST3, AU, Standalone
macOS
macOS 11 or later, Apple silicon or Intel (universal). VST3, AU and Standalone.
Windows
Windows 10 or later, 64-bit. VST3 and Standalone.
Pro Tools
Pro Tools (AAX) versions are built and tested, and arrive once they’re signed for Pro Tools.
Latest version
0.1.0, released November 17, 2026 · What’s new

Read more on the blog: Drive on every track: drums, bass, vocals, keys and the mix bus

Questions? 9 answers about VEIRA Overdrive

Works well with

VEIRA Mod Drive

A drive pedal into a modulation pedal in one vintage unit: grit that doesn’t get louder, then chorus, flanger, phaser, tremolo or vibrato, free or locked to the song.

$39.99

VEIRA Saturator

VEIRA’s modern saturator: eight styles from warm to wild, a MORPH between any two, up to three bands with their own drive and style, and level-matched AUTO GAIN, so you hear the colour, not a louder sound.

$149.99

VEIRA Harmonic Saturator

Harmonic colour, by the band: a warm tube or exactly the harmonics you set, at the same level.

$29.99