VEIRA Mastering Exciter

A four-band harmonic exciter for mastering: a colour of its own for every band (tube, tape, transistor or exact), with SOLO and DELTA to hear exactly what each one adds, at the level it came in.

$59.99, a one-time purchase with free updates

VEIRA Mastering Exciter with the Init preset while a mix plays: the SPECTRUM display with the output, the input and the colour added and the three split handles at 150 Hz, 1.20 kHz and 6.00 kHz; the HARMONICS display with the 2nd to 5th harmonic per band; the LOW, LOW MID, HIGH MID and HIGH strips with TUBE, TAPE, TRANS and EXACT lit in turn, each with DRIVE, ON and SOLO; MIX, OUTPUT, AUTO GAIN and DELTA; and the IN and OUT meters with loudness.

VEIRA Mastering Exciter brings out what a master already has by adding harmonics: weight under the kick, body in the vocal, presence in the guitars, air on the cymbals. It splits the master into four bands, LOW, LOW MID, HIGH MID and HIGH, and gives each band a colour of its own and its own DRIVE: TUBE for warmth, TAPE for density and glue, TRANSISTOR for edge and presence, EXACT for clean shine with no peak rounded. The master itself is never filtered: you hear it untouched, plus the colour, and AUTO GAIN keeps the loudness where it was.

It builds on VEIRA Harmonic Saturator and goes further for mastering. Where the Harmonic Saturator colours a track with one character made from three bands, the Mastering Exciter has four bands and a colour for each, so tube weight on the lows and exact air on top happen at once. SOLO plays any band with its colour exactly as it sits in the master, and DELTA plays only what the exciter adds, so each band can be set by ear. Its 58 presets are made for masters, mix buses and stems, and the mastering ones keep the loudness within 0.02 dB.

A tour of VEIRA Mastering Exciter

VEIRA Mastering Exciter with the Init preset while a mix plays: the SPECTRUM display with the output, the input and the colour added and the three split handles at 150 Hz, 1.20 kHz and 6.00 kHz; the HARMONICS display with the 2nd to 5th harmonic per band; the LOW, LOW MID, HIGH MID and HIGH strips with TUBE, TAPE, TRANS and EXACT lit in turn, each with DRIVE, ON and SOLO; MIX, OUTPUT, AUTO GAIN and DELTA; and the IN and OUT meters with loudness.
  1. The whole of VEIRA Mastering Exciter

    VEIRA Mastering Exciter adds harmonics to a master, band by band. It splits the master into LOW, LOW MID, HIGH MID and HIGH, and gives each band its own colour and its own DRIVE: TUBE for warmth and weight, TAPE for density and glue, TRANSISTOR for edge and presence, EXACT for clean shine and air with no peak rounded. SOLO plays one band with its colour, DELTA plays only what the exciter adds, and AUTO GAIN keeps the loudness where it was. Your master itself is never filtered: what you hear is the input, untouched, plus the colour.

  2. The spectrum

    What goes out, what came in and the colour added on its own, with each band and the splits you drag.

  3. The harmonics

    Per band, how loud the 2nd to 5th harmonics are right now, against the tone they come from.

  4. Four bands, four colours

    Each band’s colour, DRIVE, ON and SOLO.

  5. Output

    MIX, OUTPUT, AUTO GAIN to keep the level, and DELTA to hear only what is added.

  6. In and out

    Peak and RMS for the input and the output, with short-term and integrated loudness.

What VEIRA Mastering Exciter does for you

The four band strips LOW, LOW MID, HIGH MID and HIGH, each with TUBE, TAPE, TRANS and EXACT buttons, a DRIVE knob and ON and SOLO: TUBE lit at 15 % on LOW, TAPE at 10 % on LOW MID, TRANS at 10 % on HIGH MID and EXACT at 60 % on HIGH.

A colour for every band

The master is split into LOW, LOW MID, HIGH MID and HIGH, and each band gets its own colour and its own DRIVE: tube weight under the kick, tape density on the low mids, transistor presence on the guitars and the vocal, exact air on the cymbals, all at once. Switching a band’s colour crossfades over 30 ms, so you can try them while the music plays. With every band off or at 0 %, the output is the input, bit for bit.

  • Four bands
  • Four colours
  • Bit for bit at 0 %
The LOW strip: the TUBE, TAPE, TRANS and EXACT buttons with TUBE lit, the DRIVE knob at 15 %, and the ON and SOLO buttons.

Tube, tape, transistor or exact

TUBE is a warm triode curve, mostly the 2nd harmonic. TAPE is a soft, nearly symmetric curve, mostly the 3rd with a hint of the 2nd. TRANSISTOR has a firmer knee and only odd harmonics, reaching higher. EXACT makes the 2nd, 3rd and 4th directly, at the same ratio at any level, and rounds no peak. TAPE and TRANSISTOR are driven to change music as much as TUBE at the same DRIVE, so you compare characters, not amounts. On a 220 Hz tone at 50 %: TUBE’s 2nd at −16 dB, TAPE’s 3rd at −24 dB, TRANSISTOR’s 3rd at −27 dB, EXACT’s 2nd at −18 dB.

  • Warmth, glue, bite, air
  • Matched in amount
  • Measured on the engine
The AUTO GAIN button, lit, and the DELTA button.

Hear exactly what you add

DELTA plays only what the exciter adds, so you hear whether a band’s colour is a sweet octave, a gritty edge or simply too much. SOLO plays one band with its colour exactly as it sits in the master; solo several at once, or all four and you hear the master itself. Together they play one band’s colour on its own: set each band this way, then switch both off and compare with bypass.

  • DELTA
  • SOLO per band
  • Set each band by ear
The SPECTRUM display from 20 Hz to 20 kHz: the output filled in amber, the input as a grey line and the colour added as a teal line, with each band’s name, colour and DRIVE along the bottom and the split handles at 150 Hz, 1.20 kHz and 6.00 kHz.

Your master is never filtered

The input goes straight through, only delayed: the bands decide what each colour is made from, and only what it adds is mixed in. The split is linear phase, so every band stays in time and in phase with the dry signal, and the peaks a curve rounds land exactly on the master’s. The SPECTRUM display shows the output, the input and the colour added, with each band’s colour and DRIVE. The linear-phase split costs 1,216 samples of latency at 44.1 and 48 kHz (about 25 ms), which your DAW compensates.

  • Linear phase
  • Colour drawn on its own
  • 1,216 samples, compensated
The three split handles at the top of the SPECTRUM display, at 150 Hz, 1.20 kHz and 6.00 kHz, over the output’s spectrum.

Splits where your music needs them

Drag three handles on the SPECTRUM display: LOW | LOW MID from 40 to 600 Hz, LOW MID | HIGH MID from 250 Hz to 4 kHz and HIGH MID | HIGH from 2 to 16 kHz (by default 150 Hz, 1.2 kHz and 6 kHz). They glide as you move them, without a click. What a band’s colour makes below the band is filtered out, so air stays on top and the low end stays clean, and nothing audible aliases: the curves run at 8x and hear each band only up to 10.5 kHz.

  • Three handles
  • Glide while playing
  • No aliasing
The HARMONICS display: for LOW, LO MID, HI MID and HIGH, bars for the 2nd, 3rd, 4th and 5th harmonic in dB against the tone, from 0 to −60 dB.

See each band’s colour

The HARMONICS display shows, for each band, the 2nd to 5th harmonic that a tone at the band’s level gets right now, from 0 to −60 dB against the tone. The curves are driven against each band’s own long-term level, so a quiet master and a loud one get the same colour and you never gain-stage into the plugin, while louder moments get a little more: their bars rise with the music. EXACT’s bars are set by DRIVE alone.

  • Per band
  • 2nd to 5th
  • No gain staging
The OUTPUT section: MIX at 100 %, OUTPUT at 0.0 dB, AUTO GAIN lit and DELTA off.

The level stays put

AUTO GAIN takes back the loudness the colour adds, so turning DRIVE changes the colour, not the volume. It knows from the settings roughly what each band adds, then measures the loudness in and out, K-weighted, and gives back the difference. Measured on a mix with every colour at 25 to 100 % on every band, the output stayed within 0.05 dB of the input’s loudness. MIX blends the excited signal with the dry one, kept in time.

  • AUTO GAIN
  • Within 0.05 dB, measured
  • Parallel with MIX
The preset browser showing Default: Init, with previous, next and SAVE.

58 presets, each one measured

Eleven folders: Default, then Pop, Rock & Metal, Hip-Hop & R&B, Electronic, Acoustic & Jazz, Orchestral & Cinematic and Repair & Restore for mastering, plus Mix Bus, Stems and Creative. Each was measured through the real processor: the mastering presets keep the loudness within 0.02 dB, add colour 24 to 36 dB under the master and move a limited master’s peak by at most +0.30 dB. Each note says which band to set first.

  • 11 folders
  • Within 0.02 dB
  • Save your own

Get VEIRA Mastering Exciter

Pay once and it’s yours, with every future update included.

VEIRA Mastering Exciter

A four-band harmonic exciter for mastering: a colour of its own for every band (tube, tape, transistor or exact), with SOLO and DELTA to hear exactly what each one adds, at the level it came in.

  • Yours to keep: pay once, no subscription
  • Every future update, free for life
  • VST3, AU, Standalone on up to 3 computers
  • Changed your mind? Cancel within 14 days (refunds)
USD

One-time payment, in your cart.

Welcome offer

Get 10% off your first order

Leave your email and we’ll send you a code for 10% off your first order, on any plugins. One code per person.

Specifications

Type
Four-band harmonic exciter for mastering: a colour and a DRIVE per band, with SOLO, DELTA and automatic gain
Colours
TUBE (a triode curve, mostly the 2nd harmonic), TAPE (a soft symmetric curve, mostly the 3rd), TRANSISTOR (a firmer knee, odd harmonics only), EXACT (the 2nd, 3rd and 4th made exactly, at the same ratio at any level); a change crossfades over 30 ms
Drive
0 to 100 % per band (Init: LOW TUBE 15 %, LOW MID TAPE 10 %, HIGH MID TRANSISTOR 10 %, HIGH EXACT 60 %). The curves are driven against each band’s own long-term level; EXACT’s 2nd is at −6 dB against the signal at 100 % and −18 dB at 50 %
Harmonics (measured)
A 220 Hz tone at DRIVE 50 %: TUBE 2nd −16 dB; TAPE 3rd −24 dB; TRANSISTOR 3rd −27 dB and 5th −47 dB; EXACT 2nd −18 dB and 3rd −28 dB
Bands
LOW, LOW MID, HIGH MID and HIGH, each with ON and SOLO; splits 40 to 600 Hz (default 150 Hz), 250 Hz to 4 kHz (1.2 kHz) and 2 to 16 kHz (6 kHz), linear phase, 48 dB/octave
Listening
DELTA plays only what the colour adds; SOLO plays the soloed bands with their colour (neither is automatable)
Aliasing
The curves run at 8x (4x at 88.2 and 96 kHz, 2x above) and hear each band up to 10.5 kHz; EXACT makes its 2nd from what is under 9 kHz, its 3rd under 6.4 kHz and its 4th under 3.84 kHz (at 48 kHz)
Mix
0 to 100 % (default 100 %), the dry signal delayed to stay in time
Output
−24 to +12 dB
Level
AUTO GAIN, on by default: from the settings, then measured K-weighted and given back (up to 4 dB); within 0.05 dB on a mix with every colour at 25 to 100 % on every band
Latency
1,216 samples at 44.1 and 48 kHz (about 25 ms), 2,368 at 88.2 and 96 kHz, 4,672 at 176.4 and 192 kHz, reported to your DAW; with every band off or at 0 %, at MIX 0 % and bypassed, the input delayed by the latency, bit for bit
Metering
SPECTRUM (output, input and colour added, 20 Hz to 20 kHz, with each band’s colour and DRIVE and the split handles); HARMONICS (per band, the 2nd to 5th, 0 to −60 dB against the tone); IN and OUT peak and RMS; short-term and integrated LUFS
Presets
58 factory presets in 11 folders (Pop, Rock & Metal, Hip-Hop & R&B, Electronic, Acoustic & Jazz, Orchestral & Cinematic, Repair & Restore, Mix Bus, Stems, Creative), plus your own
Channels
Mono or stereo
CPU (measured)
About 11 to 16 % of one core of a 2-core cloud machine (stereo, 48 kHz)
Formats
VST3, AU, Standalone
macOS
macOS 11 or later, Apple silicon or Intel (universal). VST3, AU and Standalone.
Windows
Windows 10 or later, 64-bit. VST3 and Standalone.
Pro Tools
Pro Tools (AAX) versions are built and tested, and arrive once they’re signed for Pro Tools.
Latest version
0.2.0, released October 30, 2026 · What’s new

Read more on the blog: Adding air and presence to a master without making it harsh

Questions? 7 answers about VEIRA Mastering Exciter

Works well with

VEIRA Harmonic Saturator

Harmonic colour, by the band: a warm tube or exactly the harmonics you set, at the same level.

$29.99

VEIRA Mastering EQ

A stepped, two-channel mastering equalizer in a mastering-console panel: every control clicks to a fixed position, so a setting can be written down and recalled exactly, with left/right or mid/side, a linear-phase mode and a tube output stage.

$149.99

VEIRA Mastering Suite

A whole mastering console in one plugin: nine modules in any order, a true-peak maximizer always last, and a reference track to match.

$189.99