VEIRA Bass Enhancer White

The clean one of VEIRA’s colour bass enhancers: a compressor for 80 Hz and below that evens the lows without making them quieter, and one ENHANCE knob of exact harmonics for small speakers.

$49.99, a one-time purchase with free updates

VEIRA Bass Enhancer White on a bass line, on its light face with dark screens: LOW END with the lows in and out, the gain reduction and the harmonics added over the last 4 seconds; the SPECTRUM from 20 Hz to 2 kHz with the harmonics in teal and 80 Hz marked; the IN, GR and OUT meters; and along the bottom the THRESHOLD fader at −30.0 dBFS, GAIN REDUCTION at −10.3 dB, ENHANCE at 55 %, OUTPUT at 0.0 dB and LISTEN.

VEIRA Bass Enhancer White is a bass enhancer for the low end of a bass, a kick, an 808, a drum bus, a mix or a master. Its compressor works on 80 Hz and below only: pull the THRESHOLD fader down until the bar beside it, the lows’ own level, lights red on the loud notes, and the loud notes come down while a usual note is given back what it loses, so the low end gets even without getting quieter. The gain is applied by a gentle shelf on the whole signal, so nothing above the lows moves.

One big ENHANCE knob adds the exact 2nd to 5th harmonics of those lows, so the bass line is heard on phones, laptops and earbuds that can’t play its fundamental; the note itself is never added again, and the harmonics follow each note’s level and pitch. LOW END shows the last 4 seconds of the lows, the gain reduction and the harmonics, the SPECTRUM shows the harmonics on their own, and LISTEN lets you hear just what it adds. It has no latency, and its 22 factory presets include a whole folder for small speakers. Buy it once and VEIRA Manager installs it, like every plugin from VEIRA.

A tour of VEIRA Bass Enhancer White

VEIRA Bass Enhancer White on a bass line, on its light face with dark screens: LOW END with the lows in and out, the gain reduction and the harmonics added over the last 4 seconds; the SPECTRUM from 20 Hz to 2 kHz with the harmonics in teal and 80 Hz marked; the IN, GR and OUT meters; and along the bottom the THRESHOLD fader at −30.0 dBFS, GAIN REDUCTION at −10.3 dB, ENHANCE at 55 %, OUTPUT at 0.0 dB and LISTEN.
  1. The whole of VEIRA Bass Enhancer White

    VEIRA Bass Enhancer White does two jobs for the low end, on a clean, light face. A compressor that works on 80 Hz and below only, set with one THRESHOLD fader beside the lows’ own level, turns loud low notes down and gives a usual note back what it loses, so the low end gets even without getting quieter. One big ENHANCE knob adds the exact 2nd to 5th harmonics of those lows, so the bass line is heard on speakers that can’t play it. LOW END draws the last 4 seconds, the SPECTRUM shows the harmonics on their own, LISTEN plays only what it works on, and with nothing to do it passes your audio bit for bit, with no latency.

  2. Even lows, not quieter ones

    THRESHOLD against the lows’ own level; 4:1, 80 Hz and below only.

  3. One big ENHANCE knob

    The exact 2nd to 5th harmonics of the lows, never the note again.

  4. LOW END

    The last 4 seconds: the lows in and out, the reduction and the harmonics.

  5. See what it adds

    The output, the input and, in teal, the harmonics that carry the bass.

  6. OUTPUT and LISTEN

    LISTEN plays only the lows and the harmonics; bounces leave it out.

What VEIRA Bass Enhancer White does for you

The SPECTRUM from 20 Hz to 2 kHz: the output, the input as a line and the harmonics ENHANCE adds in teal, with COMPRESSOR to the left of the dashed 80 Hz line and HARMONICS to the right.

Exact harmonics that carry the bass

Phones, laptops and earbuds play little below about 150 Hz, so a bass line can vanish on them. ENHANCE adds the 2nd, 3rd, 4th and 5th harmonics of the lows, built exactly from each note at its own level, and the ear hears the note’s pitch from them. Only harmonics are added: the note itself is never added again, so notes from 28 to 95 Hz keep their level within 0.07 dB, and nothing aliases (every other component stayed under −112 dB).

  • 2nd to 5th harmonics
  • Note kept within 0.07 dB
  • No aliasing
COMPRESSOR 80 Hz AND BELOW: the THRESHOLD fader at −30.0 dBFS with the lows’ level in the bar beside it, and GAIN REDUCTION at −10.3 dB with its bar.

Even lows, not quieter ones

THRESHOLD is a fader with the lows’ own level in a bar beside it, red where it is over the threshold, so you set it against what is really there. Over it, the lows are turned down at 4:1 with a 6 dB soft knee, in 25 ms, and let go in 100 ms. What a note at the lows’ usual level loses is given back (at most 12 dB), so loud notes come down and quiet ones come up: a bass line’s average stayed within 0.3 dB.

  • 80 Hz and below
  • 4:1, 6 dB knee
  • Makeup up to 12 dB
LOW END, 80 Hz and below: the lows going out over coming in, GAIN REDUCTION and HARMONICS ADDED over the last 4 seconds.

Only the lows move

The gain is applied by a 4th-order low shelf on the whole signal, not by splitting off a band and adding it back, so nothing can add up wrong where bands meet. With 12 dB of change, 30 Hz moves 12.0 dB, 160 Hz 0.19 dB and nothing moves from 320 Hz up. LOW END draws the last 4 seconds of the lows going in and out, the gain reduction and the harmonics added; hover to read any moment.

  • A shelf, not a split
  • Nothing from 320 Hz up
  • 4 seconds of history
BASS ENHANCER: the big ENHANCE knob at 55 %.

One big ENHANCE knob

At 100 % the harmonics together are as loud as the lows, at 50 % exactly 6 dB quieter, and at 0 % there are none. They don’t depend on how loud the track is (the same over 40 dB), each one is set at a fixed phase against the note so they don’t pile onto its peaks (at most 0.2 dB more peak at 25 %), and a 60 Hz high-pass keeps them from adding new sub. Moving it glides over 20 ms, so it never clicks.

  • 0–100 %
  • Level-independent
  • No new sub
The IN, GR and OUT meters: IN −6.4 dBFS, GR −10.4 dB, OUT −1.8 dBFS, with short-term and integrated loudness and their difference in LU.

LISTEN, meters and no latency

LISTEN plays only what the plugin works on, the lows and the harmonics, and offline bounces always leave it out. The IN, GR and OUT meters read peak, RMS, the lows’ gain reduction and loudness in LUFS, with OUT − IN in LU. There is no latency, and with THRESHOLD at OFF and ENHANCE at 0 % the output is the input, bit for bit.

  • No latency
  • Bit-exact when idle
  • LISTEN skips bounces
The strip along the bottom of the face: COMPRESSOR 80 Hz AND BELOW, BASS ENHANCER and OUTPUT.

Clean, light and sized to your screen

The White family’s face: light, with dark screens and black knobs, every label at least 4.5:1 against what is behind it and no text under 12 points. The window opens at 1240 × 800 and scales from 75 to 200 % or to fit your screen, and right-click a knob or the fader to type a value.

  • Resizable 75–200 %
  • Text at 4.5:1 or more
  • Type any value
The preset browser showing Default: Init, with previous, next and SAVE.

22 presets in 6 folders, level-matched

Default, Drums, Bass, Mix Bus, Mastering and Small Speakers: from Kick Sub Control, Bass Even Notes and Mix Low End Glue to Master Translation, Phone Bass and Sub Drop Translator. Every preset was measured through the plugin and comes out within 0.15 dB of bypass (K-weighted), and the Small Speakers presets played the sub line 9 to 12 dB louder on a phone-sized speaker.

  • 6 folders
  • Within 0.15 dB
  • Small Speakers folder

Get VEIRA Bass Enhancer White

Pay once and it’s yours, with every future update included.

VEIRA Bass Enhancer White

The clean one of VEIRA’s colour bass enhancers: a compressor for 80 Hz and below that evens the lows without making them quieter, and one ENHANCE knob of exact harmonics for small speakers.

  • Yours to keep: pay once, no subscription
  • Every future update, free for life
  • VST3, AU, Standalone on up to 3 computers
  • Changed your mind? Cancel within 14 days (refunds)
USD

One-time payment, in your cart.

Welcome offer

Get 10% off your first order

Leave your email and we’ll send you a code for 10% off your first order, on any plugins. One code per person.

Specifications

Type
Bass enhancer: a compressor on 80 Hz and below, and exact harmonics of the lows
Compressor
THRESHOLD −48 dBFS to OFF (default −18.0 dBFS), against the lows’ level; 4:1, 6 dB soft knee, 25 ms down and 100 ms back; makeup of what a note at the lows’ usual level loses, at most 12 dB; applied by a 4th-order low shelf at 92 Hz on the whole signal
Enhance
0 to 100 % (default 35 %): the exact 2nd to 5th harmonics of the lows (weights 1, 0.75, 0.5, 0.35), at fixed phases against the note; at 100 % together as loud as the lows; a 60 Hz high-pass on them, so no new sub
Output
−24 to +12 dB; LISTEN plays the lows and the harmonics only (left out of offline bounces)
Measured
With 12 dB of change: −12.0 dB at 30 Hz, −0.19 dB at 160 Hz, nothing from 320 Hz; notes from 28 to 95 Hz keep their level within 0.07 dB; with a 78 Hz tone at ENHANCE 100 %, every other component under −112 dB
Displays
LOW END (the last 4 s: the lows in and out, gain reduction, harmonics added; hover read-out); SPECTRUM 20 Hz to 2 kHz (input, output and harmonics); GAIN REDUCTION; IN, GR and OUT meters with short-term and integrated LUFS
Latency
None
Clean when idle
With THRESHOLD at OFF and ENHANCE at 0 %, the output is the input, bit for bit
Parameters
4, all automatable
Presets
22 factory presets in 6 folders, level-matched to bypass within 0.15 dB (K-weighted), plus your own
Channels
Mono or stereo (linked)
Window
1240 x 800 at 100 %, resizable from 75 to 200 % or to fit the screen (button, corner grip or Cmd/Ctrl + and −), saved with the session
CPU (measured)
About 1 % of one core of a 2-core cloud machine (stereo, 48 kHz, everything on)
Formats
VST3, AU, Standalone
macOS
macOS 11 or later, Apple silicon or Intel (universal). VST3, AU and Standalone.
Windows
Windows 10 or later, 64-bit. VST3 and Standalone.
Pro Tools
Pro Tools (AAX) versions are built and tested, and arrive once they’re signed for Pro Tools.
Latest version
0.1.0, released November 10, 2026 · What’s new

Read more on the blog: White: clean control of low end, bands and drive

Questions? 8 answers about VEIRA Bass Enhancer White

Works well with

VEIRA Sub Control

A compressor for the low end only, beside a bass enhancer that makes it carry on any speaker.

$49.99

VEIRA Bass DI Enhancer

A whole bass chain on one knob: an even low end, harmonics and a finished tone, at the same level.

$24.99

VEIRA Multiband White

The clean one of VEIRA’s colour multiband compressors: four transparent bands, three crossovers you drag on the display, zero latency or LINEAR PHASE, AUTO makeup and an external key.

$149.99