VEIRA Bass Enhancer Blue

The console one of VEIRA’s four colour bass enhancers: a compressor for 80 Hz and below, and one big ENHANCE knob that adds a console transformer’s harmonics, so the bass is heard on small speakers.

$49.99, a one-time purchase with free updates

VEIRA Bass Enhancer Blue, painted 1970s steel blue, on a bass line with kick and hats: the LOW END display from 20 Hz to 2 kHz with the blue output, the light input line and the cream harmonics, the compressor’s reduction hanging from the top in red; the IN and OUT meters; THRESHOLD at −26.0 dBFS with GAIN REDUCTION −9.0 dB, ENHANCE at 55 %, OUTPUT at 0.0 dB and LISTEN.

VEIRA Bass Enhancer Blue is the console one of VEIRA’s four colour bass enhancers, and it does two jobs for a bass, a kick, an 808, a drum bus or a whole mix. A compressor that works on 80 Hz and below only evens out the deepest notes, with the smooth timing of a 1970s British console’s bus VCA, and gives back on average what it takes, so loud notes come down, quiet ones come up and the low end isn’t thinned. One big ENHANCE knob adds the harmonics a console’s output transformer makes when the bass drives its iron, so the bass line is heard on phones, laptops and earbuds that can’t play its fundamental.

Only harmonics are added, each at its natural place against the note, so the note you recorded stays as it was, and nothing is split: the compressor works through a low shelf at 80 Hz, so nothing above the lows moves. The lows’ live level runs in the THRESHOLD fader, the LOW END display draws the harmonics in cream and the compressor’s reduction in red, LISTEN plays only the lows and the harmonics, and there is no latency. Its 22 factory presets in six folders include a whole folder for small speakers. Buy it once and VEIRA Manager installs it, like every plugin from VEIRA.

A tour of VEIRA Bass Enhancer Blue

VEIRA Bass Enhancer Blue, painted 1970s steel blue, on a bass line with kick and hats: the LOW END display from 20 Hz to 2 kHz with the blue output, the light input line and the cream harmonics, the compressor’s reduction hanging from the top in red; the IN and OUT meters; THRESHOLD at −26.0 dBFS with GAIN REDUCTION −9.0 dB, ENHANCE at 55 %, OUTPUT at 0.0 dB and LISTEN.
  1. The whole of VEIRA Bass Enhancer Blue

    VEIRA Bass Enhancer Blue does two jobs for the low end, painted 1970s steel blue. A compressor that works on 80 Hz and below only evens out the deepest notes with a console bus VCA’s smooth timing, and gives back on average what it takes, so the low end is evened out, not thinned; the lows’ live level runs in its THRESHOLD fader. One big ENHANCE knob adds the harmonics a console’s output transformer makes when the bass drives its iron, each at its natural place against the note, so the bass line is heard on speakers that can’t play it. The LOW END display draws what it adds, LISTEN plays only the lows and the harmonics, and with nothing to do it passes your audio bit for bit, with no latency.

  2. See what it adds

    The output, the input, the harmonics in cream and the compressor’s reduction in red.

  3. A compressor for the lows alone

    THRESHOLD against the lows’ live level, in its track; 3:1, 80 Hz and below only.

  4. One big ENHANCE knob

    A console transformer’s harmonics of the lows, each in its place against the note.

  5. OUTPUT and LISTEN

    LISTEN plays only the lows and the harmonics; bounces leave it out.

  6. IN and OUT

    Peak, RMS and loudness in LUFS, in and out.

What VEIRA Bass Enhancer Blue does for you

The LOW END display from 20 Hz to 2 kHz: the output filled in blue, the input as a light line and the harmonics ENHANCE adds in cream, the compressor’s reduction hanging from the top in red on its own GR dB scale, and the 80 Hz split dashed.

Harmonics that carry the bass

Phones, laptops and earbuds play little of a bass note’s fundamental, so a bass line can vanish on them. ENHANCE adds the 2nd to 6th harmonics of the lows, as a console’s output transformer makes them when the bass drives its iron, and the ear hears the note’s pitch from them. Each harmonic lands at its natural phase against the note, and the note itself is never added again: it moves by less than 0.05 dB. The harmonics are made from a band under 100 Hz and end below 700 Hz, so nothing aliases.

  • 2nd to 6th harmonics
  • The note left as it was
  • No aliasing
COMPRESSOR 80 Hz AND BELOW: the THRESHOLD fader at −26.0 dBFS with the lows’ level in its track, blue up to the handle and red past it, and GAIN REDUCTION at −9.0 dB with its bar.

A console compressor for the lows alone

THRESHOLD is a fader with the lows’ live RMS level running in its track, red where it goes past the handle, so you set it against what is really there. 3:1 with an 8 dB soft knee, 20 ms in and 180 ms out, like a console bus VCA. It gives back on average what it took over about the last 3 seconds: bass notes 12 dB apart came out 7.7 dB closer while the lows’ energy moved 0.06 dB. A 4th-order low shelf at 80 Hz applies it, so nothing is split and nothing above the lows moves.

  • 80 Hz and below
  • 3:1, 8 dB knee
  • Evens, doesn’t thin
BASS ENHANCER: the big ENHANCE knob at 55 %, its cream ring on the blue paint.

One big knob for the iron

More ENHANCE drives the iron harder and mixes more of it in: mostly the 2nd and 3rd harmonics at gentle settings, the 4th to 6th as it rises. On a 55 Hz note the harmonics sit 17 dB under it at 20 %, 9 dB at 50 % and 3 dB at 100 %. Like a real transformer, lower notes drive the iron harder, and each note is set against its own recent peak, so the same harmonics come out at −36 and −6 dBFS.

  • 0–100 %
  • −9 dB at 50 %
  • Level-independent
The IN and OUT meters: IN −4.1 dBFS, OUT −3.9 dBFS, with short-term and integrated loudness and their difference in LU.

See what it adds

The LOW END display shows 20 Hz to 2 kHz in sixth-octave steps: the output in blue, the input as a light line and, in cream, the harmonics ENHANCE adds, with the compressor’s reduction hanging from the top in red, drawn through its 80 Hz shelf. GAIN REDUCTION shows how hard the lows are held right now, and the IN and OUT meters read peak, RMS and loudness in LUFS.

  • Harmonics drawn in cream
  • Reduction across frequency
  • IN, OUT and LUFS
OUTPUT at 0.0 dB and the LISTEN button.

LISTEN, and nothing in the way

LISTEN plays only what the plugin works on: the lows (100 Hz and below) and the harmonics, so you can hear exactly what you add; offline bounces always leave it out. OUTPUT runs from −24 to +12 dB. There is no latency, so it is fine while recording, and with THRESHOLD at OFF and ENHANCE at 0 % the output is the input, bit for bit.

  • No latency
  • Bit-exact when idle
  • LISTEN skips bounces
The strip along the bottom of the blue face: COMPRESSOR 80 Hz AND BELOW, BASS ENHANCER and OUTPUT.

Painted Blue, sized to your screen

1970s steel blue with cream print and black knobs, like the rest of VEIRA’s Blue family, with every text at least 12 points and 4.5:1 against its ground. The window opens at 1280 × 800 and scales from 75 to 200 % or to fit your screen. Right-click a knob or the fader to type a value.

  • Resizable 75–200 %
  • Text at 4.5:1 or more
  • Type any value
The preset browser showing Default: Init, with previous, next and SAVE.

22 presets in 6 folders, level-matched

Default, Drums, Bass, Mix Bus, Mastering and Small Speakers: from Kick Weight, DI Bass Iron and Bus Low Glue to Subtle Console Iron, Phone Bass and Earbud 808. Each one’s OUTPUT level-matches it to bypass within 0.05 LU on the material it was made for, and the Small Speakers presets add 11 to 13 dB to what a phone-sized speaker plays of the bass.

  • 6 folders
  • Within 0.05 LU
  • Small Speakers folder

Get VEIRA Bass Enhancer Blue

Pay once and it’s yours, with every future update included.

VEIRA Bass Enhancer Blue

The console one of VEIRA’s four colour bass enhancers: a compressor for 80 Hz and below, and one big ENHANCE knob that adds a console transformer’s harmonics, so the bass is heard on small speakers.

  • Yours to keep: pay once, no subscription
  • Every future update, free for life
  • VST3, AU, Standalone on up to 3 computers
  • Changed your mind? Cancel within 14 days (refunds)
USD

One-time payment, in your cart.

Welcome offer

Get 10% off your first order

Leave your email and we’ll send you a code for 10% off your first order, on any plugins. One code per person.

Specifications

Type
Bass enhancer: a compressor on 80 Hz and below, and the harmonics of a console output transformer
Compressor
THRESHOLD −48 dBFS to OFF (default −20 dBFS), against the lows’ RMS level; 3:1, 8 dB soft knee, 20 ms attack, 180 ms release; gives back what it took over about 3 s (up to 12 dB); applied by a 4th-order low shelf at 80 Hz (at 10 dB: 5.0 dB at 80 Hz, 0.45 dB at 120 Hz, under 0.005 dB from 240 Hz)
Enhance
0 to 100 % (default 35 %): the 2nd to 6th harmonics of the lows (100 Hz and below), each at its natural phase against the note; on a 55 Hz note 17 dB under it at 20 %, 9 dB at 50 %, 3 dB at 100 %
Output
−24 to +12 dB; LISTEN plays the lows and the harmonics only (left out of offline bounces)
Measured
Harmonics within 0.024 rad of their natural phase; the note moves at most 0.042 dB; anything that isn’t a harmonic under −131 dBFS; notes 12 dB apart come out 7.7 dB closer
Displays
LOW END 20 Hz to 2 kHz (input, output, harmonics and the compressor’s reduction); GAIN REDUCTION; IN and OUT meters with short-term and integrated LUFS
Latency
None
Clean when idle
With THRESHOLD OFF and ENHANCE 0 %, the output is the input, bit for bit
Parameters
4, all automatable
Presets
22 factory presets in 6 folders, level-matched to bypass within 0.05 LU, plus your own
Window
1280 x 800 at 100 %, resizable from 75 to 200 % or to fit the screen (button, corner grip or Cmd/Ctrl + and −), opens at 100 %, saved with the session
CPU (measured)
About 1.3 to 4 % of one core of a 2-core cloud machine (stereo, 48 kHz)
Formats
VST3, AU, Standalone
macOS
macOS 11 or later, Apple silicon or Intel (universal). VST3, AU and Standalone.
Windows
Windows 10 or later, 64-bit. VST3 and Standalone.
Pro Tools
Pro Tools (AAX) versions are built and tested, and arrive once they’re signed for Pro Tools.
Latest version
0.1.0, released November 10, 2026 · What’s new

Read more on the blog: Blue: console glue, iron and rack grit

Questions? 8 answers about VEIRA Bass Enhancer Blue

Works well with

VEIRA Sub Control

A compressor for the low end only, beside a bass enhancer that makes it carry on any speaker.

$49.99

VEIRA Bass DI Enhancer

A whole bass chain on one knob: an even low end, harmonics and a finished tone, at the same level.

$24.99

VEIRA Multiband Blue

The console-bus one of VEIRA’s four colour multiband compressors: the VCA that glues a mix in each of four bands, three crossovers you drag on the display, zero latency or LINEAR PHASE, M/S per band and an external key.

$149.99