VEIRA Tube Leveler

VEIRA’s flagship tube limiter, in the tradition of the classic twin-channel vari-mu limiters of the late 1950s: two complete channels, LEFT/RIGHT, LINK or LAT/VERT, tubes whose sound grows with the bias, transformers, and two big needle meters.

$179.99, a one-time purchase with free updates

VEIRA Tube Leveler, in warm graphite with brushed aluminium and cream print, on a pop mix in LAT/VERT: two big GAIN REDUCTION needle meters reading 7.2 dB on the mid and 3.1 dB on the side, the MODE buttons between them, the IN and OUT meter bridge, the WAVEFORM and GAIN REDUCTION display, the two channel strips with INPUT, THRESHOLD and TIME CONSTANT, and IRON, MIX and OUTPUT.

VEIRA Tube Leveler is VEIRA’s flagship tube limiter, in the tradition of the classic twin-channel vari-mu limiters of the late 1950s, with a face of its own: warm graphite, brushed aluminium, cream print and two big needle meters. It has two complete channels, each with its own INPUT, THRESHOLD and six-position TIME CONSTANT, run apart (LEFT/RIGHT), linked so the stereo image never moves (LINK), or as lateral and vertical, the mid and the side (LAT/VERT). The tubes are the gain control, so the ratio rises gently with level, and their harmonics grow with the reduction: clean enough at light settings for a master, heavier and more “tube” when you lean on it.

IRON adds the input and output transformers and the output stage, which weigh down heavy bass and round off the top; at 0 % the plugin is clean, and with no reduction it passes the sound bit for bit. Everything non-linear runs at eight times the sample rate. The 67 factory presets in 14 folders run from Leveler Glue to Master TC6, Steady Centre and Parallel Drum Crush, each level-matched. Buy it once and VEIRA Manager installs it, like every plugin from VEIRA.

A tour of VEIRA Tube Leveler

VEIRA Tube Leveler, in warm graphite with brushed aluminium and cream print, on a pop mix in LAT/VERT: two big GAIN REDUCTION needle meters reading 7.2 dB on the mid and 3.1 dB on the side, the MODE buttons between them, the IN and OUT meter bridge, the WAVEFORM and GAIN REDUCTION display, the two channel strips with INPUT, THRESHOLD and TIME CONSTANT, and IRON, MIX and OUTPUT.
  1. The whole of VEIRA Tube Leveler

    VEIRA Tube Leveler is VEIRA’s flagship tube limiter, in the tradition of the classic twin-channel vari-mu limiters of the late 1950s, with a face of its own in warm graphite, brushed aluminium and cream. Two complete channels each have their own INPUT, THRESHOLD and six-position TIME CONSTANT, run apart (LEFT/RIGHT), linked (LINK) or as lateral and vertical (LAT/VERT, the mid and the side). The push-pull tube cell’s harmonics grow with the reduction, the input and output transformers weigh down heavy bass under IRON, and two big needle meters show each channel’s gain reduction. With IRON at 0 % and no reduction it passes the sound bit for bit.

  2. Two big needle meters

    One per channel, on VU ballistics: LEFT and RIGHT, LAT and VERT, or MONO.

  3. Three modes

    LEFT/RIGHT runs the channels apart, LINK drives both from channel A, LAT/VERT works on the mid and the side.

  4. What it took off

    The output in front of the input, and each channel’s reduction over the last nine seconds.

  5. Two complete channels

    Each with its own INPUT, THRESHOLD and six-position TIME CONSTANT.

  6. Iron, mix and output

    IRON sets the transformers and the output stage; MIX blends in the dry signal; OUTPUT sets the level.

  7. In and out

    Level and loudness in and out; set OUTPUT until OUT − IN reads about 0 LU to compare fairly.

What VEIRA Tube Leveler does for you

The two channel strips: channel A (lateral, the mid) with INPUT 0.0 dB, THRESHOLD −18.0 dBFS and TIME CONSTANT 2, and channel B (vertical, the side) with THRESHOLD −26.0 dBFS and TIME CONSTANT 3.

Two complete channels, three ways to run them

Each channel has its own INPUT, THRESHOLD and TIME CONSTANT under its own meter. LEFT/RIGHT runs them apart, for hard-panned doubles or two mono sources on one track; LINK lets channel A’s controls drive both with one control voltage, so the stereo image never moves (it holds within 0.08 dB); LAT/VERT works on the lateral (the mid) and the vertical (the side), each with its own side chain: measured, a quiet centred tone under a loud side-only tone changes by 0.00 dB, where LINK pulls it down 9.0 dB.

  • LEFT/RIGHT, LINK, LAT/VERT
  • Image holds in LINK
  • Centre untouched in LAT/VERT
The two GAIN REDUCTION needle meters in brushed-aluminium bezels, LAT reading 7.2 dB and VERT 3.1 dB, with the MODE buttons LEFT/RIGHT, LINK and LAT/VERT between them, LAT/VERT lit.

Two big needle meters

The hero of the face: one large GAIN REDUCTION needle meter per channel, an aged cream face behind glass in a brushed-aluminium bezel, 0 dB at the right where the needle rests and 20 dB at the left, with the heavy end marked red. They move on IEC VU ballistics, as the hardware’s did, and read LEFT and RIGHT, LAT and VERT or MONO with the mode; under each, the reduction in dB.

  • One per channel
  • VU ballistics
  • Read-out in dB
Channel A’s needle meter: an aged cream face behind glass, 20 dB at the left with the heavy end marked red, 0 dB at the right, the needle at 7.2 dB and LAT GR −7.2 dB under it.

Tubes whose sound grows with the bias

A remote-cutoff tube is the gain control: the further it is turned down, the more its curvature shows. At rest the cell is linear; at 2.3 dB of reduction it adds 0.05 % THD, at 10 dB 0.37 % and at 16 dB 0.76 %, mostly odd and low, with the 5th climbing faster than the 3rd, so the spectrum changes, not only the amount. At the same 8.5 dB of reduction it measures about four times the harmonics of VEIRA Comp Blue, and the control voltage cancels in the output transformer, so there are no thumps.

  • Harmonics follow the reduction
  • 4× Comp Blue’s colour
  • No thumps
The IRON knob at 40 %, under OUTPUT, in a knurled aluminium skirt with a cream ring.

IRON: the transformers and the output stage

IRON sets how much of the input and output transformers and the output stage you hear. The cores saturate on heavy lows (a 50 Hz tone gets 20 dB more 3rd than 1 kHz), the output stage adds a little 2nd and 3rd, and the top rolls off gently (−0.7 dB at 10 kHz at 100 %). The default 30 % adds 0.08 % THD to a 1 kHz tone at −12 dBFS; 0 % is transformerless and clean. Everything non-linear runs at 8× the sample rate: the worst aliased product measures −97 dBc at full IRON.

  • Weight on the lows
  • 8× oversampled
  • Clean at 0 %
Channel A’s strip: INPUT at 0.0 dB and THRESHOLD at −18.0 dBFS on large black knobs in knurled aluminium skirts, and the TIME CONSTANT buttons 1 to 6 with 2 lit.

Six time constants and a ratio that rises with level

The classic attack and release pairs, measured against the published table: releases of 0.3, 0.8, 2 and 5 s, and two programme-dependent settings that let go quickly after a single peak but hold on for 10 s, or with 6 up to 25 s, after sustained compression. There is no ratio knob, as on the classic units: through the feedback side chain the ratio rises from about 1.2:1 at THRESHOLD to 2.5:1 at 8 dB over and about 4:1 when driven hard.

  • TC 1 to 6
  • Measured to the table
  • 1.2:1 rising to 4:1
The WAVEFORM with the output in amber in front of the grey input, and the GAIN REDUCTION lane with channel A’s reduction filled and channel B’s as a cream line, over the last nine seconds.

See what it took off

The display shows the last nine seconds: the WAVEFORM with the output in amber in front of the input it was taken from, and the GAIN REDUCTION lane with channel A’s reduction filled and channel B’s as a line when the channels work apart. With TIME CONSTANT 5 or 6, watch the release lengthen after a dense passage. The meter bridge reads IN and OUT level and loudness, with OUT − IN in LU, so you can match levels before you judge.

  • Nine seconds
  • Both channels
  • OUT − IN in LU
The preset browser showing Default: Init, with previous, next and SAVE.

67 presets in 14 folders, level-matched

Default, Drums, Bass, Guitar, Keyboards, Strings, Brass, Woodwinds, Vocals, Mix Bus, Mastering, Parallel, Lat-Vert and Creative FX: from Leveler Glue and Programme Glue TC5 to Master TC6, Steady Centre, Parallel Drum Crush and Tube Drive. Each preset’s THRESHOLD was fitted for its designed reduction on its folder’s material, then OUTPUT so it comes out as loud as it went in: within 0.10 dB outside Default.

  • 14 folders
  • Within 0.10 dB
  • Save your own

Get VEIRA Tube Leveler

Pay once and it’s yours, with every future update included.

VEIRA Tube Leveler

VEIRA’s flagship tube limiter, in the tradition of the classic twin-channel vari-mu limiters of the late 1950s: two complete channels, LEFT/RIGHT, LINK or LAT/VERT, tubes whose sound grows with the bias, transformers, and two big needle meters.

  • Yours to keep: pay once, no subscription
  • Every future update, free for life
  • VST3, AU, Standalone on up to 3 computers
  • Changed your mind? Cancel within 14 days (refunds)
USD

One-time payment, in your cart.

Welcome offer

Get 10% off your first order

Leave your email and we’ll send you a code for 10% off your first order, on any plugins. One code per person.

Specifications

Type
Twin-channel tube limiter in the tradition of the classic twin-channel vari-mu limiters of the late 1950s: push-pull remote-cutoff tube cell, feedback side chain
Channels A and B
Each: INPUT −12 to +24 dB; THRESHOLD −40 to 0 dBFS; TIME CONSTANT 1 to 6
Ratio
Set by the tubes, rising with level: about 1.2:1 at the threshold, 2.5:1 at 8 dB over, about 4:1 driven hard
Time constants
Attack 0.2 or 0.4 ms; release 0.3, 0.8, 2 and 5 s; 5: 2 to 10 s; 6: 0.3 to 25 s, programme-dependent
Modes
LEFT/RIGHT (two independent channels), LINK (channel A drives both, one control voltage) or LAT/VERT (A the mid, B the side, each with its own side chain)
Iron
IRON 0 to 100 % (default 30 %): input and output transformers and the output stage; more 3rd on heavy bass, top −0.7 dB at 10 kHz at 100 %; clean at 0 %
Output
MIX 0 to 100 %, the dry signal in time; OUTPUT −24 to +12 dB
Processing
Tube cell and iron 8x oversampled; worst aliased product −97 dBc at full IRON and 12 dB of reduction; bit for bit with IRON 0 and no reduction, in every mode
Latency
98 samples at every sample rate (2.0 ms at 48 kHz), constant and reported to your DAW
Meters
Two GAIN REDUCTION needle meters (0 to 20 dB, IEC VU ballistics); IN and OUT peak and RMS, short-term and integrated LUFS, OUT − IN in LU
Display
The last nine seconds: WAVEFORM (output in front of the input) and GAIN REDUCTION for both channels; hover read-outs
Presets
67 factory presets in 14 folders (Default, Drums, Bass, Guitar, Keyboards, Strings, Brass, Woodwinds, Vocals, Mix Bus, Mastering, Parallel, Lat-Vert, Creative FX), level-matched, plus your own
Channels
Mono or stereo (a mono track uses channel A)
Face
VEIRA’s flagship: warm graphite with a fine brushed grain, cream print, black knobs in knurled aluminium skirts, meters in brushed-aluminium bezels
Window
1520 x 1000 at 100 %, resizable from 75 to 200 %, saved with the session
CPU (measured)
About 8 % of one core of a 2-core cloud machine (stereo, 48 kHz, both channels compressing), mostly the 8x oversampling
Formats
VST3, AU, Standalone
macOS
macOS 11 or later, Apple silicon or Intel (universal). VST3, AU and Standalone.
Windows
Windows 10 or later, 64-bit. VST3 and Standalone.
Pro Tools
Pro Tools (AAX) versions are built and tested, and arrive once they’re signed for Pro Tools.
Latest version
0.2.0, released November 17, 2026 · What’s new

Read more on the blog: Twin-channel tube limiting: linked, split, or mid and side

Questions? 8 answers about VEIRA Tube Leveler

Works well with

VEIRA Comp Blue

The vintage one of VEIRA’s four colour compressors: a tube vari-mu compressor in the tradition of the classic vari-mu tube compressors, with a ratio that rises with level, six time constants, LAT/VERT and COLOUR.

$149.99

VEIRA Mix Bus

A very simple, very gentle processor for the mix bus, the last thing before mastering: glue, three broad tone moves and width, at the same loudness.

$149.99

VEIRA Mastering Suite

A whole mastering console in one plugin: nine modules in any order, a true-peak maximizer always last, and a reference track to match.

$189.99