VEIRA Passive EQ

A tube program EQ in the tradition of the passive program EQs of the 1950s, on its own and laid out like a rack unit: low shelves you boost and attenuate at once, a resonant high boost, a gentle high attenuation and the make-up amplifier, on a face of knobs and switches.

$149.99, a one-time purchase with free updates

VEIRA Passive EQ, a 1950s-style rack unit in green hammertone enamel with cream print, on a pop mix: LOW FREQUENCY at 60 Hz with BOOST +8.1 dB and ATTEN −4.4 dB, the high boost +4.5 dB at 10 kHz with BANDWIDTH Q 0.62, HIGH ATTEN −2.4 dB at 20 kHz, DRIVE 30 %, OUTPUT 0.0 dB, AUTO GAIN off, EQ in and the pilot lamp lit.

VEIRA Passive EQ is a tube program equalizer in the tradition of the passive program EQs of the 1950s, the unit on its own, laid out like a rack unit in green hammertone enamel with cream print. Its low section can boost and attenuate the same frequency at once, for more weight below and a gentle dip above that clears the mud, as long as BOOST sits 2 to 3 steps over ATTEN; a resonant high boost with its bandwidth and a long, gentle high attenuation make the silky top. The curves are fitted to published measurements of the hardware and keep their analog shape to 20 kHz.

DRIVE pushes the make-up amplifier and its output transformer for a triode’s 2nd harmonic and a little 3rd on heavy bass, and at 0 % the plugin is clean. The face has knobs and switches only, with the dials reading 0 to 10 and their dB beneath, so you work by ear; AUTO GAIN and EQ IN / OUT keep comparisons fair, and the 63 factory presets in 12 folders were each level-matched on their material. Buy it once and VEIRA Manager installs it, like every plugin from VEIRA.

A tour of VEIRA Passive EQ

VEIRA Passive EQ, a 1950s-style rack unit in green hammertone enamel with cream print, on a pop mix: LOW FREQUENCY at 60 Hz with BOOST +8.1 dB and ATTEN −4.4 dB, the high boost +4.5 dB at 10 kHz with BANDWIDTH Q 0.62, HIGH ATTEN −2.4 dB at 20 kHz, DRIVE 30 %, OUTPUT 0.0 dB, AUTO GAIN off, EQ in and the pilot lamp lit.
  1. The whole of VEIRA Passive EQ

    VEIRA Passive EQ is a tube program equalizer in the tradition of the passive program EQs of the 1950s, the unit on its own, in green hammertone enamel with cream print. Low shelves at 20, 30, 60 or 100 Hz that you can boost and attenuate at the same time, a resonant high boost from 3 to 16 kHz with its bandwidth and a long, gentle high attenuation feed the make-up amplifier and its output transformer. The dials read 0 to 10, as on the hardware, with the dB shown beneath each, and the face has knobs and switches only.

  2. The low-end trick

    Boost and attenuate the same low frequency, BOOST 2 to 3 steps over ATTEN: more weight below, less mud above.

  3. High boost

    A resonant peak from 3 to 16 kHz with its bandwidth; with HIGH ATTEN, the silky top.

  4. High attenuation

    A long, gentle shelf at 5, 10 or 20 kHz that softens the whole top.

  5. The amplifier

    DRIVE pushes the triode and its output transformer; OUTPUT sets the level.

  6. Switches and pilot lamp

    AUTO GAIN and EQ IN / OUT keep comparisons fair; the lamp glows while the EQ is in.

What VEIRA Passive EQ does for you

The LOW FREQUENCY section on green hammertone enamel: FREQ at 60 Hz, BOOST at 6 reading +8.1 dB and ATTEN at 2.5 reading −4.4 dB, on bakelite knobs over printed 0 to 10 dials.

The low-end trick, set right

BOOST and ATTEN on the same low frequency don’t cancel: the attenuation reaches much higher than the boost, so you get more weight below and a gentle dip above that clears the mud. But a step of ATTEN is worth more than a step of BOOST, so equal dials nearly cancel at the bottom; building the presets showed that the classic lift with a dip above it comes with BOOST 2 to 3 steps over ATTEN. Kick Weight (6.5 and 3.5) gives +3.7 dB at 20 Hz and −1.7 dB at 450 Hz.

  • 20, 30, 60 or 100 Hz
  • BOOST 2 to 3 steps over ATTEN
  • Boost +13.5, atten −17.5 dB
The HIGH FREQUENCY section: FREQ at 10 kHz, BOOST at 2.5 reading +4.5 dB and BANDWIDTH reading Q 0.62, between SHARP and BROAD.

A silky top

The high boost is a resonant peak at 3, 4, 5, 8, 10, 12 or 16 kHz with its own BANDWIDTH, from a sharp Q 2.2 to a broad Q 0.45, and like the hardware it narrows as you boost. HIGH ATTEN is a long, gentle shelf at 5, 10 or 20 kHz. Together they keep the shine of the peak while taking the harshness off above it: the classic silky top for vocals, strings and masters.

  • Up to 18 dB of boost
  • Q 2.2 to 0.45
  • Gentle high attenuation
The HIGH ATTEN section: ATTEN SEL at 20 kHz and ATTEN at 1.5 reading −2.4 dB.

Curves fitted to the hardware

The passive network’s curves are fitted to published measurements of an original unit: at full depth, the low boost’s +3 dB points land within 0.3 % of 100, 200, 300 and 700 Hz, the low attenuation’s −3 dB points within 0.25 % of 250, 400, 800 and 1500 Hz, and the high attenuation’s within 0.33 % of 600 Hz, 1.5 and 2.5 kHz. Running at four times the sample rate, the digital filters stay within 0.023 dB of the analog curves from 20 Hz to 20 kHz.

  • Fitted to measurements
  • Within 0.023 dB to 20 kHz
  • 4x oversampled
The AMPLIFIER section: DRIVE at 30 % and OUTPUT at 0.0 dB.

The amplifier and its transformer

The passive network loses about 16 dB, and the make-up amplifier brings it back. DRIVE pushes its triode and output transformer harder: the 2nd harmonic leads, more on loud peaks than on quiet passages, which keep their level, and the transformer adds its 3rd on heavy bass. At 100 % the 2nd harmonic of a 1 kHz tone at −6 dBFS sits at −22.7 dB, and a 50 Hz tone gets −29.0 dB of 3rd against −37.8 dB at 1 kHz. Nothing aliases above −85 dB, and at 0 % it is clean.

  • 2nd harmonic leads
  • More 3rd on heavy bass
  • Clean at 0 %
The SWITCHES: the AUTO GAIN toggle down at OFF, the EQ toggle up at IN, and the jewel PILOT lamp lit.

AUTO GAIN, EQ IN / OUT and the pilot lamp

Program EQ boosts flatter, which makes them hard to judge. AUTO GAIN takes off the loudness the curve adds or removes, worked out from the curve as music would hear it, and shows the correction under the switches while it is on; it never pumps. The EQ IN / OUT toggle switches the curve in and out over 20 ms with the amplifier and OUTPUT left in place, and the jewel pilot lamp glows while the EQ is in.

  • Shows its correction
  • Never pumps
  • Compare the curve alone
The whole green hammertone face: LOW FREQUENCY and HIGH FREQUENCY on top; HIGH ATTEN, the AMPLIFIER and the SWITCHES below, knobs and switches only.

Knobs and switches, nothing else

An original 1950s rack design in green hammertone enamel with cream print, between rack ears: big bakelite knobs over printed dials, bat-handle toggles and a jewel pilot lamp. There are no screens and no meters, so you work by ear. The dials read 0 to 10 as on the hardware, with the dB each one does in a window beneath; type either. Every text is at least 12 pt and 4.5:1 against the enamel, and the window resizes from 75 to 200 %.

  • Dials 0 to 10, dB beneath
  • No screens, no meters
  • Text at 4.5:1 or more
The preset browser showing Default: Init, with previous, next and SAVE.

63 presets in 12 folders, level-matched

Default, Drums, Bass, Guitar, Keyboards, Strings, Brass, Woodwinds, Vocals, Mix Bus, Mastering and Creative FX: from Kick Weight and Bass Low-End Trick to Silky Vocal Top, Mud Cleanup, Master Low-End Trick and Old Radio. Each preset’s OUTPUT was fitted on its folder’s material so it comes out as loud as it went in, within 0.05 dB outside Creative FX, so comparing presets is about tone, not level.

  • 12 folders
  • Within 0.05 dB
  • Save your own

Get VEIRA Passive EQ

Pay once and it’s yours, with every future update included.

VEIRA Passive EQ

A tube program EQ in the tradition of the passive program EQs of the 1950s, on its own and laid out like a rack unit: low shelves you boost and attenuate at once, a resonant high boost, a gentle high attenuation and the make-up amplifier, on a face of knobs and switches.

  • Yours to keep: pay once, no subscription
  • Every future update, free for life
  • VST3, AU, Standalone on up to 3 computers
  • Changed your mind? Cancel within 14 days (refunds)
USD

One-time payment, in your cart.

Welcome offer

Get 10% off your first order

Leave your email and we’ll send you a code for 10% off your first order, on any plugins. One code per person.

Specifications

Type
Passive tube program EQ with its make-up amplifier and output transformer, in the tradition of the passive program EQs of the 1950s
Low frequency
FREQ 20, 30, 60 or 100 Hz; BOOST 0 to 10 (13.5 dB); ATTEN 0 to 10 (−17.5 dB), usable together
High frequency
FREQ 3, 4, 5, 8, 10, 12 or 16 kHz; BOOST 0 to 10 (18 dB); BANDWIDTH Q 2.2 (sharp) to 0.45 (broad)
High atten
ATTEN SEL 5, 10 or 20 kHz; ATTEN 0 to 10 (−16 dB)
Dials
0 to 10 as on the hardware, linear in dB, with the dB shown beneath each; type dB or a dial position
Amplifier
DRIVE 0 to 100 %: a triode’s 2nd harmonic, the transformer’s 3rd on heavy bass; clean at 0 %. OUTPUT −12 to +12 dB
Switches
AUTO GAIN (shows its correction while on), EQ IN / OUT (glides over 20 ms), PILOT lamp
Processing
4x oversampled (2x at 88.2 and 96 kHz); curves within 0.023 dB of their analog shape from 20 Hz to 20 kHz; bit for bit at Init
Latency
64 samples at 44.1 to 96 kHz (1.3 ms at 48 kHz), none at 176.4 and 192 kHz; constant and reported to your DAW
Display and metering
None: knobs and switches only, as on the hardware
Presets
63 factory presets in 12 folders (Default, Drums, Bass, Guitar, Keyboards, Strings, Brass, Woodwinds, Vocals, Mix Bus, Mastering, Creative FX), level-matched, plus your own
Channels
Mono or stereo
Face
An original 1950s rack design: green hammertone enamel, cream print, bakelite knobs, bat-handle toggles and a jewel pilot lamp between rack ears
Window
1440 x 720 at 100 %, resizable from 75 to 200 %, saved with the session
Formats
VST3, AU, Standalone
macOS
macOS 11 or later, Apple silicon or Intel (universal). VST3, AU and Standalone.
Windows
Windows 10 or later, 64-bit. VST3 and Standalone.
Pro Tools
Pro Tools (AAX) versions are built and tested, and arrive once they’re signed for Pro Tools.
Latest version
0.1.0, released November 7, 2026 · What’s new

Read more on the blog: The low-end trick, done right: why BOOST sits above ATTEN

Questions? 10 answers about VEIRA Passive EQ

Works well with

VEIRA EQ Gold

The warm one of VEIRA’s four colour EQs: a passive tube program EQ in the tradition of the classic program equalizers, with the low boost-and-attenuate trick, a silky top, a mid-range section and TUBE drive.

$149.99

VEIRA EQ Blue

The vintage one of VEIRA’s four colour EQs: a 1970s British inductor console EQ with a steep high-pass, a resonant low shelf, a mid bell that narrows as you push it, a gradual high shelf and the console’s iron as COLOUR.

$149.99

VEIRA Tube Leveler

VEIRA’s flagship tube limiter, in the tradition of the classic twin-channel vari-mu limiters of the late 1950s: two complete channels, LEFT/RIGHT, LINK or LAT/VERT, tubes whose sound grows with the bias, transformers, and two big needle meters.

$179.99