- Type
- Mastering processor: one knob for loudness, density and tone, mono or stereo
- Controls
- MASTER 0 to 100 % (default 50 %); INPUT TRIM −12 to +12 dB with MATCH (to −13 LUFS integrated, after 10 s or more); OUTPUT CEILING −2.0 to −0.1 dBTP (default −1.0); BYPASS LISTEN off, master or original, level-matched; dither off, 16-bit or 24-bit TPDF
- Signature EQ
- A bell at 350 Hz, −5.0 dB, Q 1.2 (1.17 octaves between its half-gain points), and a 20 Hz high-pass, always on
- Behind the knob
- Air shelf at 10 kHz (0 to +1 dB), glue compressor (1:1 to 1.7:1), four bands at 120 Hz, 1 kHz and 6 kHz (to 2.5:1 in the lows, 2:1 above), mono under 120 Hz, drive into a true-peak limiter with an 8x transient clipper, and a clean guard
- Loudness (measured)
- Premasters at −13 LUFS: about −13.7 LUFS at 0 %, −10.6 at 50 %; at 100 %, −6.2 to −7.4 LUFS on typical dense mixes and about −8.2 to −8.7 on bass-heavy ones, kept clean
- True peak (measured)
- Never over the ceiling in 90 one-minute runs (ceilings −2, −1 and −0.1 dBTP, premasters up to 6 dB too hot), by an independent 16x reading and a BS.1770-4 meter
- Distortion at 100 % (measured)
- THD 0.02 % (50 Hz), 0.000 % (1 and 10 kHz); SMPTE IMD 0.03 %; aliasing at least 86 dB under the tone
- Latency
- 782 samples at 48 kHz (16.3 ms), constant and reported; the host’s bypass stays in time
- Metering
- Integrated, short-term and momentary loudness (BS.1770-4), true-peak maximum, to target, PLR, a minute of loudness history, gain reduction (limiter, glue, lows), correlation, clean limit
- Parameters
- 5, all automatable
- Presets
- 21 factory presets in 5 folders, plus your own
- Window
- 1120 x 720 at 100 %, resizable from 75 to 200 % or to fit the screen (button, corner grip or Cmd/Ctrl + and −), opens at 100 %, saved with the session
- Formats
- VST3, AU, Standalone
- macOS
- macOS 11 or later, Apple silicon or Intel (universal). VST3, AU and Standalone.
- Windows
- Windows 10 or later, 64-bit. VST3 and Standalone.
- Pro Tools
- Pro Tools (AAX) versions are built and tested, and arrive once they’re signed for Pro Tools.
- Latest version
- 0.1.0, released November 10, 2026 · What’s new