VEIRA EQ White

The clean one of VEIRA’s four colour EQs: a surgical, transparent eight-band parametric EQ with zero-latency minimum phase or linear phase, SOLO on every band and AUTO GAIN.

$149.99, a one-time purchase with free updates

VEIRA EQ White, painted pearl white, on a pop mix: the white EQ curve over the output and input spectrum with numbered band points, a 30 Hz low cut, a low shelf, band 3 cutting 2.5 dB at 320 Hz with its read-out, a lift at 3.2 kHz and a high shelf; MINIMUM PHASE 0 ms and AUTO −0.5 dB at the top, the IN and OUT meters on the right, and BANDS, BAND 3 and OUTPUT along the bottom.

VEIRA EQ White is the clean one of VEIRA’s four colour EQs, a parametric equalizer painted pearl white. Eight bands, each a bell, a low or high shelf, a low or high cut from 6 to 96 dB/oct or a notch, sit as numbered points on a large curve drawn over the live spectrum of the output and the input. Drag a point for frequency and gain, use the mouse wheel for Q, and read the exact values under the mouse. SOLO plays only the region a band works on, so a ring or a harsh spot is quick to find.

PHASE chooses zero-latency minimum phase, whose bells keep their analog shape up to 20 kHz, or linear phase for mastering, at a constant 181 ms at 48 kHz reported to your DAW. AUTO GAIN keeps the loudness where it was, worked out from the curve so it never pumps, and with every band flat the output is the input bit for bit. The 40 factory presets in 9 folders run from Kick Punch and Vocal Clarity to Master Polish and hum notches. Buy it once and VEIRA Manager installs it, like every plugin from VEIRA.

A tour of VEIRA EQ White

VEIRA EQ White, painted pearl white, on a pop mix: the white EQ curve over the output and input spectrum with numbered band points, a 30 Hz low cut, a low shelf, band 3 cutting 2.5 dB at 320 Hz with its read-out, a lift at 3.2 kHz and a high shelf; MINIMUM PHASE 0 ms and AUTO −0.5 dB at the top, the IN and OUT meters on the right, and BANDS, BAND 3 and OUTPUT along the bottom.
  1. The whole of VEIRA EQ White

    VEIRA EQ White is a parametric equalizer painted pearl white. Eight bands, each a bell, a shelf, a cut from 6 to 96 dB/oct or a notch, are drawn as numbered points on a large curve over the live spectrum of the input and the output. Drag a point and the band follows; SOLO lets you hear what a band works on, AUTO GAIN keeps the loudness where it was, and PHASE chooses zero-latency minimum phase or linear phase.

  2. The curve over your music

    Drag a numbered point for frequency and gain, the wheel for Q; the output’s spectrum in front of the input’s shows what your curve changed.

  3. Eight bands, six shapes

    Pick a band, then its shape: bell, low or high shelf, low or high cut, or notch.

  4. The selected band

    FREQUENCY, GAIN, Q and SLOPE, ON, and SOLO to hear just the region the band works on.

  5. Output and phase

    AUTO GAIN keeps the loudness where it was; PHASE chooses zero-latency minimum phase or linear phase.

  6. In and out

    Input and output level and loudness, and how much louder or quieter the EQ made the music, in LU.

What VEIRA EQ White does for you

The graph: the white curve over the light output spectrum and the grey input spectrum, the numbered band points, band 3’s own curve shaded under the read-out 3 BELL 320 Hz −2.5 dB Q 1.40, the dB scale on the left, the dBFS scale on the right and the ±12 dB range button.

Eight bands, every shape, nothing added

Each of the eight bands can be a bell, a low or high shelf, a low or high cut from 6 to 96 dB/oct, or a notch, with GAIN up to ±24 dB and Q from 0.1 to 18. Drag a point on the graph for frequency and gain, use the mouse wheel for Q, and read the exact values in the hover read-out. With every band flat the output is the input, bit for bit.

  • 8 bands, 6 shapes
  • Cuts to 96 dB/oct
  • Bit for bit when flat
BAND 3: FREQUENCY at 320 Hz, GAIN at −2.5 dB, Q at 1.40 and SLOPE dimmed at 24 dB/oct, with ON lit and SOLO under them.

SOLO: hear what a band works on

SOLO plays only the region the selected band acts on: a band-pass at a bell’s frequency and Q, what a cut takes away, the side a shelf shelves. Sweep a narrow bell with SOLO on and a ring, a boxy spot or a harsh frequency jumps out; turn SOLO off and set the cut. It follows the band you select and offline bounces always leave it out.

  • Per band
  • Finds rings fast
  • Left out of bounces
A fix-it curve in linear phase: LINEAR PHASE 181 ms at the top, a steep low cut, a notch at 120 Hz, narrow cuts at 400 Hz, 1.1 and 2.9 kHz, a lift at 5.2 kHz on band 6 with its read-out, a high shelf and a high cut.

Minimum phase or linear phase

MINIMUM phase adds no latency and behaves like an analog EQ, for tracking, mixing and drums. LINEAR phase leaves the phase of the music untouched, for mastering, buses and stems that are summed again, at a constant 181 ms at 48 kHz that your DAW compensates. The manual shows where linear phase pre-rings (steep, low cuts) and why the hum notches stay in minimum phase.

  • 0 ms or 181 ms
  • Reported to your DAW
  • Click-free switching
The graph: the white curve over the light output spectrum and the grey input spectrum, the numbered band points, band 3’s own curve shaded under the read-out 3 BELL 320 Hz −2.5 dB Q 1.40, the dB scale on the left, the dBFS scale on the right and the ±12 dB range button.

Analog shape to 20 kHz

Many digital EQs squeeze a high boost narrower and lower than the knob says as it nears the top of the range. White’s minimum-phase bells keep their analog shape: a +12 dB bell at 15 kHz is within 0.84 dB of the analog curve up to 20 kHz at 48 kHz, where a cramped digital bell is 6.1 dB off. In linear phase the curve is drawn from the analog shapes directly.

  • No cramping
  • Within 0.84 dB at 15 kHz
  • Measured
The OUTPUT section: the OUTPUT knob at 0.0 dB, AUTO GAIN lit, PHASE with MINIMUM selected and LATENCY 0 ms.

AUTO GAIN for fair comparisons

A boost makes music louder, and louder always sounds better for a moment. AUTO GAIN works out from the curve itself how much louder or quieter it makes typical music, K-weighted like a loudness meter, and takes that back off. It reads the curve, not the music, so it never pumps; the status line shows what it applies.

  • From the curve
  • Never pumps
  • 0 dB when flat
The strip along the bottom of the pearl-white face: BANDS and the type buttons, BAND 3 with FREQUENCY, GAIN, Q, SLOPE, ON and SOLO, and OUTPUT with AUTO GAIN and PHASE.

Four colours of EQ, one family

VEIRA’s four colour EQs are painted like the colour limiters: White in pearl, Red in deep lacquered red, Gold in brushed champagne and Blue in 1970s steel blue. White is the clean one, Red the mid/side one, Gold the warm tube program EQ and Blue the vintage console EQ. Each draws its curve over the live spectrum, and every label on the paint stands at least 4.5:1 against it.

  • White, Red, Gold, Blue
  • Curve over the spectrum
  • Text at 4.5:1 or more
The preset browser showing Default: Init, with previous, next and SAVE.

40 presets in 9 folders, level-matched

Default, Drums, Bass, Guitar, Keys, Vocals, Mix Bus, Mastering and Surgical Fixes: from Kick Punch and Vocal Clarity to Master Polish in linear phase and hum notches for 50 and 60 Hz mains. Every preset but Init has AUTO GAIN on and was measured on matching material: each keeps the loudness within 0.5 LU, so switching presets changes the tone, not the level.

  • 9 folders
  • Within 0.5 LU
  • Save your own

Get VEIRA EQ White

Pay once and it’s yours, with every future update included.

VEIRA EQ White

The clean one of VEIRA’s four colour EQs: a surgical, transparent eight-band parametric EQ with zero-latency minimum phase or linear phase, SOLO on every band and AUTO GAIN.

  • Yours to keep: pay once, no subscription
  • Every future update, free for life
  • VST3, AU, Standalone on up to 3 computers
  • Changed your mind? Cancel within 14 days (refunds)
USD

One-time payment, in your cart.

Welcome offer

Get 10% off your first order

Leave your email and we’ll send you a code for 10% off your first order, on any plugins. One code per person.

Specifications

Type
Clean eight-band parametric EQ: zero-latency minimum phase or linear phase
Bands
8, each a bell, low or high shelf, low or high cut or notch; ON and SOLO per band
Frequency, gain, Q
20 Hz to 20 kHz; −24 to +24 dB; Q 0.1 to 18
Slope
6, 12, 18, 24, 36, 48, 72 or 96 dB/oct for cuts
Phase
MINIMUM (no latency) or LINEAR (8704 samples at 44.1 and 48 kHz, 181 ms at 48 kHz), constant and reported to your DAW
Accuracy
Minimum-phase bells within 1.2 dB of their analog shape up to 20 kHz at 48 kHz (0.11 dB at 96 kHz); a +12 dB bell at 15 kHz within 0.84 dB
Output
OUTPUT −24 to +24 dB; AUTO GAIN from the curve, K-weighted on a typical mix’s spectrum
Listening
SOLO plays the region a band works on; offline bounces always leave it out
Display
Curve over the output and input spectrum; ±6, ±12 or ±24 dB; hover read-outs
Metering
IN and OUT peak and RMS, short-term and integrated LUFS, OUT − IN in LU
Presets
40 factory presets in 9 folders (Default, Drums, Bass, Guitar, Keys, Vocals, Mix Bus, Mastering, Surgical Fixes), plus your own
Channels
Mono or stereo
Face
Pearl white, with charcoal print and black knobs; dark screens set into the paint
Window
1480 x 900 at 100 %, resizable from 75 to 200 %, saved with the session
CPU (measured)
About 0.3 to 0.5 % of one core of a 2-core cloud machine in minimum phase, about 1 % in linear phase (stereo, 48 kHz, 8 bands)
Formats
VST3, AU, Standalone
macOS
macOS 11 or later, Apple silicon or Intel (universal). VST3, AU and Standalone.
Windows
Windows 10 or later, 64-bit. VST3 and Standalone.
Pro Tools
Pro Tools (AAX) versions are built and tested, and arrive once they’re signed for Pro Tools.
Latest version
0.2.0, released November 11, 2026 · What’s new

Read more on the blog: Four colours of EQ: clean, mid/side, warm and vintage · EQ to make room in a mix: high-pass filters, cuts and masking

Questions? 8 answers about VEIRA EQ White

Works well with

VEIRA EQ Red

The mid/side one of VEIRA’s four colour EQs: eight bands, each on the stereo signal, its mid, its side or one channel, with BASS MONO, AIR, WIDTH and LISTEN for the stereo field.

$149.99

VEIRA EQ Gold

The warm one of VEIRA’s four colour EQs: a passive tube program EQ in the tradition of the classic program equalizers, with the low boost-and-attenuate trick, a silky top, a mid-range section and TUBE drive.

$149.99

VEIRA EQ Blue

The vintage one of VEIRA’s four colour EQs: a 1970s British inductor console EQ with a steep high-pass, a resonant low shelf, a mid bell that narrows as you push it, a gradual high shelf and the console’s iron as COLOUR.

$149.99